BRIDJIT 3-Piece Expandable Curb Ramp Set
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
If you've already found the answer to your October 2nd, 2015 question, then you have already received it. In the case that others might have a similar question about these ramps (which are designed to fit nicely on the "rolled curbing" or "trough" type curb entry to the driveway), they work perfectly with In the case of a 4-foot square curb, you will need a ramp that is 4" wide Curbs that are at least 6 inches tall may require you to get a ramp that is designed specifically for curbs of that height. A video that explains how the ramps work is available on the BRIDJIT website.
At the time I bought it, Amazon had a better price!
Anchoring can be done in a number of ways. have not anchored ours, just positioned it on a curve so that even when it wiggles, it stays in good shape for quite a few games. In the almost a year since we've owned the car, it has never bottomed out. Wishing you great success!
It is true that we have used our ramp to cross small pools of water. As you cross over the ramp, keep in mind that it's 1 inch high as you start and 3 3/8 inches in the middle. If you want to be sure we have a fit, please use the depth measuring chart on Amazon. One way some customers dealt with this issue was to have someone saw cut the concrete across, which allowed the water to gradually My sincere thanks go out to Bridjit Curb Ramps are the product of John Curry and Bridjit
Selected User Reviews For BRIDJIT 3-Piece Expandable Curb Ramp Set
Just last week, we bought a new home, and have noticed that the road by the driveway changes abruptly in elevation. The BRIDJIT 3/4 piece sets seem to be popular on my street because I saw a number of neighbors with the boxes. Upon seeing the website on the actual product, I decided to research it further. Yes, there are cheaper options out there, but they are also built cheaper! In order to cover a 16' driveway, I had to order the extra centerpiece. I am absolutely blown away by this! The 2016 Toyota Corolla I drive on a daily basis has never caused me any trouble coming in or leaving the driveway. The bolting will likely be completed by the end of Whenever I approach it from the same point, it tends to pull to the far left. I have to slide it back every ten yards. There are 14 days left. It's not that big of a deal at all. Our driveway is on a dead end road, so I expect if you take your driveway in both directions you won't have to deal with this quite as much as we have. Quite frankly, I don't care how many times I have to move it back and forth. It was worth it for me to switch my car!.
I like this product because it is heavy, so it does not move much in rainstorms but also allows enough water to pass underneath so that it does not get raked Furthermore, it makes it easy for a car of almost any size to get up the Despite being very dense, it does have two downsides it is extremely expensive for what it is (ground up used tires), and it is heavy, which makes opening and putting in place difficult. I found that once you get it in place, you don't need to move it often, depending on how incline is and where you live. Before I had this, my MINI Cooper S would scrape every time, now I've got no trouble making it over the curb.
The goal of buying this product was to utilize it as a transition from the street to my It takes a lot of time and effort to assemble these three pieces because of their weight (each 50lbs). As soon as the barriers are assembled and situated, you'd think the traffic in the area would stay level. The reality, however, is that they don't. Every time the car moves over them, they usually move themselves up and down the street while laying in or against the curb. Hence, every few weeks or so I have to adjust them back. Taking into account that the assembled unit now weighs 150 pounds and is close to nine feet long, this is an impressive feat. Lift the heavy object carefully and pull it back into place. Protect your back as you do this. In fact, they make the transition easier. My only wish is that they wouldn't leave.
This is the story of Bridjit 3. I now have a three-piece ramp set that has solved my problem with scraping the front and back ends of my low-rise car There is an clearance vehicle. As my driveway is not exactly rolled curb, I am required to raise the Bridjit curb ramp higher off the ground than is necessary. The result is that it moves quite a bit when it is In addition to moving it quite often when I enter and exit my driveway, I have to move it back once I have gotten out. If Bridjit had a ramp set that was not designed to be used primarily with high rolled curbs, I would be very happy to purchase.
The way my wife treats her low-income children Frequently, your car is dragging its right front bumper, which can physically damage it and jar it. Since I just repaired the fence for other damage, I wanted to make it easier for her to enter and exit, so I chose this option. The fourth section was ordered directly from Bridgit at a better price than advertised on Amazon, so I started with three sections and added four sections. We were able to receive our product within a timely manner because the company was efficient. As a result of helping my neighbor put together his four sections and adding one to mine, I decided to put my sections together by myself this time, but it was definitely easier with a friend. So far, Though a bit pricey, it turns out to be a good value in the long run.
The price is a bit higher than I expected, but the bump into the driveway is much less pronounced, and these are likely to last a long time. They worked well in keeping me from feeling the bump when entering my driveway, since there was no depression on the curb. The instructions included with these were extremely helpful and allowed me to install this much more easily than I anticipated, even though I had to connect 8 of these together due to the width of our Although I think these are expensive, it is hard to argue with the price when you keep in mind that the rubber will last forever—and I have never had In my experience, the channel under the ramp works well enough to channel water, but I found that I had to clean out the entrance every few months to avoid clogging it with leaves. That isn't a big deal at all, but something to keep an eye out.
Upon arrival, we found three boxes weighing over 40 pounds each and each with an earlier than expected delivery date. It was not possible to connect them because the holes did not match. For the bolts to be connected, I had to use 3/8" bolts in place of the supplied 1/2" bolts. With even the suggested trick of sliding a board underneath the joint, it was difficult to get a wrench to fit the nuts, so I had to use my fingers instead By tying them up. I think they should have been designed so they would just lock together like a puzzle without any hardware. I was able to wrestle them down and they did what they promised. This is a very heavy duty product.
The product works well but it's damn expensive for something made from recycled One the one hand, it is a free market and if another cannot provide it for less, that should be the case. Nevertheless, no one does, so I guess there is a reason for it.
Related Products For BRIDJIT 3-Piece Expandable Curb Ramp Set
