PANADY Attic Stairs Insulation Cover - 25 In x 54 In x 11 In - Class A Fireproof Attic Door Insulation Cover - Attic Access Insulation Cover - Attic Stairway Insulator - Attic Ladder Insulation Cover
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
In my staple gun, I used 1/4 6mm staples with no space between them. My application did not require the use of tape. I use my attic frequently and have never had a problem with access or the zipper. I take my time with the zipper because it has been described as a weak link by others. According to my infrared thermometer, this lowered my summer temperatures by 20 degrees. I hope this has been of assistance.
I'm not sure what you're talking about. With the cover installed, I can assure you that there is plenty of room for the stairs to retract closed. It was incredibly simple to set up, taking only 20 minutes of my time, and it performs exactly as it should. On a hot day, I used a laser thermometer to compare the temperature on the face of the attic door before and after, finding a 20-degree difference. It also keeps air from leaking out or causing drafts. This was a good buy. Another one is on my wish list.
It ought to function correctly. On the inside, a T50 staple gun is used to secure the material, which is basically foil-covered bubble wrap that you can pinch to fit. To avoid problems, pinch it far away from the zipper opening.
You have 30 days to return items purchased from Amazon. If you have any warranty questions, you should contact the seller or visit the manufacturer's website.
Selected User Reviews For PANADY Attic Stairs Insulation Cover - 25 In x 54 In x 11 In - Class A Fireproof Attic Door Insulation Cover - Attic Access Insulation Cover - Attic Stairway Insulator - Attic Ladder Insulation Cover
There's a reason these aren't available in big-box stores: they're too expensive. They haven't even come close to the R- It claims that there are three. I'm an HVAC engineer, and you'll need a 4-person crew. To do so at a reasonable cost, I used 6" thick insulating material ( I bought it on purpose because it was inexpensive and still a) mitigates radiation heat transfer and b) creates an air barrier between my house and the attic, eliminating one air path for the chimney effect to occur (an energy waster). br>br>My attic stair and surrounding area were about 5-foot wide before installation. The temperature is 6 degrees Fahrenheit lower than the average ceiling temperature. This was cut in half after installation. 3°F. It took 10 minutes to complete the installation (including the time it took to locate the staple gun). I'd recommend it for the price, but keep in mind that you won't be getting R-.
I was looking for insulation, but it was for a different purpose. I had never thought about insulating our attic access door. I thought to myself, "What a brilliant idea. " I decided to give the Panady cover a shot after some research. I wanted to make sure it fit right away when it arrived. I didn't plan on installing it because I assumed it would take two people. After putting it together, I realized that staple-ing it would take me no more than 10 minutes at most. From the time the bag was opened to the time the attic door insulation was installed, it took about 20 minutes. I was able to sense the positive effects almost immediately. On one hand, I'm ecstatic that I was able to insulate our home's largest heat leak. On the other hand, I'm beginning to wonder why I hadn't thought of it sooner, say, 15 years ago!.
3 R- value. My pull- Moldy and rusted dn stairwells This thing isn't even close to having an R value of 15, and it's only about a quarter inch thick. Why wouldn't contractors use this miraculous product in new home construction if it has such a high value? To get that kind of R value, you'll need a 4 to 6" thickness. Yes, it installs fairly easily and appears to stop airflow at first, but the underside of the cover is about the same temperature as cold attic air, and if there is a reasonable level of humidity in the house, it will sweat on the underside of the cover to the point where my pull-down blinds will become ineffective. Mold and rust started to grow down the stairs. I'm thinking about getting rid of my one-year-old pull-up. dn stairwells, as well as replacing the cover with a home-made one. To achieve a higher R-value, a unit of insulation board was created. br>Update for November 2021; I removed the sweating cover and replaced it with a home-made insulated frame and 2" insulation board, which has a much higher R value and no sweating or mold.
I noticed a 20-foot tall tree in Texas and in my house (built in the late 1990s). The temperature in the attic door area has dropped by 25 degrees. An infrared digital thermometer was used to determine this. Along with stapling, I decided to use black HVAC tape to seal the bottom seam against the wood frame. br>br>Wish this had been included in the construction of the house. They ought to be! The zipper is the only thing that bothers me about this product. It does not appear to be as tough as the rest of the cover. br>br>Installation was a breeze; just make sure you have a staple gun, at least 6MM staples, and possibly HVAC tape if you want to go the extra mile; it took about 20 minutes.
To begin with, I am not a handyman in the least! It only took me 20 minutes to complete this task. I tacked all four corners in place and worked along each side at about 3-inch intervals, sliding the gun to keep the edge taut (which included climbing down to refill the gun). There was no need for caulking or tape to keep it in place. It brought the temperature down to at least 30 degrees at the top of my stairs. On a sunny day, I used to open the door to go downstairs and get smacked in the face with heat. It was well worth the $50! It's something I wish I'd done ten years ago.
It's not quite as hot as the sun in our Florida attic, but it's close. I assumed we were wasting money due to the AC and poor insulation because our interior attic access felt hot to the touch. Although this cover did not fit perfectly, it was simple to manipulate and staple to the framing to cover the opening. The attic's suffocating heat subsided as soon as the cover was stapled down and zipped shut. There was a distinct difference when we closed the ladder. With the added insulation, we hope to see a reduction in our utility bills. I'll post an update as soon as we get our results, but for now, we're very happy with our purchase.
When I received this item, I discovered that it was slightly shorter than the 54" stated length. A narrow strip of wood was added to one end of the attic opening to solve the problem. The product did a good job of preventing heat from the attic from entering the hall beneath the attic opening area after it was installed. It's possible that the shorter length was simply a result of a manufacturing error in the product I received. With the exception of the extra work required to install the product, I give it high marks for efficiency.
As I installed the unit, I could feel how much warmer my room got (it was installed in the winter). Using a power stapler, it was simple to set up. Because it was slightly larger than the opening, I had to pleat the sides in a few places, but it only took a little patience to get it to fit properly. Under the attic insulation cover, I caulked any seams in the ceiling joists. It appears to have made a significant difference in keeping our master bedroom a few degrees warmer.