Bones Skate Bearings Cleaning Unit
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
2) Remove the wheel bearings. In order to make this quick and easy, I use a bearing press/puller. 1) Gently uninstall any bearing guards 2) Remove the spacers--one by one-by loosening the wingnut on each container until all are removed. Then, set each bearing separately on the bolt, separated by a spacer (you can clean 8 bearings at once, then tighten the wing net). *5) Fill up one-third of the container with the solvent of your choice. I use 91% Isopropyl alcohol or 99% Isopropyl alcohol (never use 70% alcohol). the cover tightly and shake it of "*br>7) Remove any solvent from the container. The solvent will become very black if it doesn't get refilled and you need to repeat. 8) Remove the bearings when you are done cleaning them and let them air Lubricate and attach shields if applicable. 9) Lubricate the bearings with an appropriate lubricant and reinstall the shields if necessary. ** 10 ) Insert the bearings back into the wheels and enjoy smoother,
I'm here. All products will be on a single order and will be shipped in the same box if you add them all to your shopping cart and check once.
A great substitute for gasoline is kerosene. Kerosene is a cleaning agent that I use on my motorcycle You can make this ring chain yourself. You don't have to worry about hurting the rubber For the bearing seals, the rings are the same. Six dollars is about what it costs per gallon. We made it for only $00 and it will last for a long time.
There are 8mm diameters of the center bolt, so it won't fit 7mm bearings as they are, but you can buy a thinner bolt and associated wing nut at any hardware store, the bolt pulls out of the lid with ease.
Selected User Reviews For Bones Skate Bearings Cleaning Unit
A simple bearing cleaner like this, which you could build yourself if you had spare parts, will be an excellent cleaning tool for you. The user interface is very easy It has been years since I cleaned my bearings, and I have barely used my board (less than five times a Until we cleaned them, the bearings had a decent/fair roll to them, but now they seem to roll almost forever with a single The cleaning method I used is as follows A/V Tools - *Bones speed cream
* Floor bike pump (as an alternative to compressed air)*isopropyl alcohol 91%**1. You can put bearings on without the shields, so that the balls face 1. 2. Just under 1/3 of the chamber should be filled with The remaining 1/3 I did not need (did not want to waste and didn't need all of it)*3. Shut off and shake for 30 seconds, then open and spin the Keeping spinning, repeat this step a few times until all dirt seems to have been removed from bearings. 4* Each a. Isopropyl alcohol 91% is dumped and then refilled a little less than 1/3 of the bottle. Shut the door and shake it It is important that the alcohol in the bottle is 5
By blowing into bearings with a floor pump equipped with an exercise ball nozzle tip, debris can be removed and bearings can become dry and cleaner. The sixth point. Apply speed cream to the bearing's ball bearing side once it is dry. Spin the bearing a few times after drying. I. 7. Delete the shields and reinstall them. There is a 90-percent chance that this method will get you 90 points Approximately 95% of the house is Having just cleaned my bearings for the first time, I don't know what I should expect. I could clean the bearings with air until no debris can be detected when spinning them if I had a compressed air can. Using the above method is all I need to get them completely clean for my use and is fine.
The wrench will be different for those who roller skate instead of board, but other than that, what else do you need? It is a great deal to purchase this kit. The answer to your question is yes, you could make your own bearing shaker bottle, but this is a DENSE small bottle, and, although a carriage bolt would have been better than a fully-welded bottle There is no DIY version of the threaded bolt that is as good as the real thing. takes care of bearings that don't require a tap with a drift (again, how do you blame the puller if the bearings are stuck? All 64 bearings have been pulled, and the thing seems to work like The puller got a couple out with just a little tug (before switching to a drift) but about ten got stuck. It was not a broken pulley that caused me to switch A pain in the fingers was the cause. It's hard to say anything bad about Speed Cream, right?.
I was so pleased with how clean and smooth my balls turned out after using this product. It is, therefore, loaned out to my friends so they can have clean balls as well.
My maintenance kit is not complete without this product by Bones. I have been skating for many years now, and it's by far one of my most necessary pieces. The program does nothing groundbreaking, it's simply a tool that offers a lot of convenience, and it's that reason that I love it so much. In 2013, I purchased this product and I still have no problems cleaning my bearings with it. Remember that this does not contain any solvents that you can use to clean your bearings. If I recall correctly, this comes with instructions on how to clean it. For those of you over 18, I recommend Acetone, which you can easily obtain at any big box store. You should be careful when handling solvents, because they can do serious damage. If you are handling rubber, wear gloves with rubber coating. It is the best decision you can make.
had to remove the 16 bearings on my quad skates and clean them. It was found that several bearings were not freely spinning. Cleaning solvent was 91% Isopropyl alcohol, which I used for the task. After filling the container to 1/3 and shaking it, I followed the manufacturer's instructions. Once I cleaned the bearings, I lubricated them with Bones Speed Cream Skate Bearing Lubricant before mounting them back on the skates. Since the bearings spin freely and have been made quieter, they are now As well as the speed difference, I noticed the difference in the time. Users who rated this low because the product had no solvent are advised to read the description carefully before rating it. This is what it A list of directions is included. The cleaning kit is simplistic, but it gets the job done. There are no cleaning solutions included. It may be possible for some of you to build your own cleaning unit for less money, but there is no substitute for time. Making my own cleaning kit is not something I feel inclined to do myself personally, since I'd rather spend my time actually cleaning my bearings. The pros are Container is sturdy and should be able to withstand any weather conditions. The spacers are the perfect size for fitting 8 bearings along with the spacers while conserving solvents. The seal is pretty good when shaken with the The kit consists of all the items needed (except solvent) to clean eight bearings at once. There are detailed instructions, too. The cons are I thought it would be a little cheaper if it were a little cheaper However, it appears to work correctly.
Taking the time to clean your bearings regularly is an important part of skateboard maintenance, and this kit will pay for itself if you do so. This kit is also quite affordable, considering you only use 2 drops per bearing. The speed cream bottle may look small, but you only use 2 drops per bearing, so the bottle will last a very long time.
What is the cleaning ability of the machine? I would say probably When you're finished, would it be as easy to get your bearings out as it is to use them? Not at all. The tool has just one purpose and is very simple. It is important to keep your bearings in place so that you can clean them effectively, efficiently, and safely. Cleaning up afterward is easy, and I really like using.
Related Products For Bones Skate Bearings Cleaning Unit
