Gamma Sports Tennis Racquet Ultra Cushion Replacement Grips

I had never before replaced a grip on a racquet handle so I found this really easy to do and it is well worth the effort! The grip material is very sticky and stretches nicely to hold everything in place, so it appears to be of excellent quality. The tape used at the top of the handle to help secure the grip material appears to be of good quality, too. As part of the process, the wrap needs to be cut at the right angle towards the top of the handle, but I had a little extra material left over after I finished wrapping so there was no shortage. It is something I will highly recommend.

Kori Hale

| Mar 05, 2021

You can also use it on lawnmower handles if you are using tennis rackets. A lawnmower handlebar was wrapped with two grips that I bought and used. The original foam handle does not work as well as this one. So far, it is very grippy with gloves on, a little cushiony, and I have been very pleased with it. Please see addendum. While I was mowing, I rested the handlebar of the mower against a wall. Later, I noticed a black line was left on the white wall from the dye. You should be aware that the black dye on the grip can leach.

Saige Santana

| Dec 24, 2020

of all, this grip is exactly what I was looking for. Recenty, I had my racquet restrung and my worn grip replaced by someone who is an expert. It should be the same grip I had on there (thick, spongy, tacky when clean, with a slight My dial-up connection was a dead flat called something like "Gamma Micro-D" It is "thin". Next week, I'll be using this grip on the court, and I can't wait to try it out. noticed that several reviews went on to say that people had issues with the finishing end of the grip. I want to suggest a few changes. It will require a plastic cable tie, a pair of diagonal cutters, and a razor blade to follow the instructions. Before I began installing the grips, I measured the distance from the bottom of the grip to where I wanted the finished wrap to end, leaving enough space below the racquet's logo so that half the thickness of the finishing tape would cover the logo when applied. I wrapped my handle length, stretching it to make sure it was tight enough around the flare at the butt of the handle, and I overlapped each wrap so that the edge of the new wrap touched, but didn't cover, The handle of my racquet has the fattest handle I could find in several tennis shops, and the grip I received perfectly complemented the amount of stretch and overlap on the handle. In the end, I wrapped it all the way to the top, completely covering the logo. I next got out a cable tie that was long enough to fit around the handle, and I cinched it down on the handle so that when it reached the middle of the grip, the edge of the cable tie was the measurement that gave me the measurement to where the grip would I want myself a Stanley knife or an ACT knife, or something similar). I then cut off the excess grip material in a very precise circle using the edge of a cable tie as a guide and pulling up on the tip of the grip material in order to avoid cutting the handle (and thereby damaging it). After using my diagonal cutters to cut one snip through the cable tie to ensure it doesn't damage the grip beneath, I removed it. In the end, I peeled the protective film from the backing of the supplied finishing tape and, sticking half the width of the tape to the bare handle and the other half of the width to the grip material, applied the tape in the same direction.

Rowen Solomon

| Jul 23, 2021

This was bought to replace grips that were literally flaking off of the handles. Despite my rackets being around 15 years old, some of us just use them to hit a ball off the wall or play on the court for a short period of time, so it wasn't worth it to compensate by replacing them all. I watched a YouTube video before attempting to replace the grip, which helped me visualize and understand exactly what Developed a replacement process that was easier to use. Nevertheless, it is not difficult at all. It took me about one and a half hours to racket all three rackets. It has a very nice tack, feels great in my hand, and has a good tack on the racket. I'm very pleased with my decision to choose this grip.

Ivy Decker

| May 19, 2021

The Grip tape works great in my cane handle to provide extra support. The grip tape has excellent binding abilities, and the textured material has made my grip on my cane a lot better. In order to reinforce the handle, I used a previous tape that wasn't as tacky as this one and didn't last as long. The racket tape would have been useful when wood rackets were the norm as I used to play tennis with wooden rackets. Therefore, for a tennis racket or any other racket, it can provide the grip you need to do the job effectively and efficiently. Secondly, the price is a plus, this is not as expensive as the others from Wilson or Head.

Cason Love

| Oct 06, 2020

My order arrived only a few days after I placed it The grip on my tennis racket is much better than I was used to with my old one. The racket no longer slips or rotates in my hand because I no longer have to grip it extra tight. There is something soft and tacky about the material. We have only been using it for a few months, so we do not know yet how long it will last. This grip is so good, I will buy another to regrip my other racket.

Liliana Thornton

| Oct 17, 2020

It's not my favorite that the elevated portion of the design on the grip has red stitching. A grip of this length can cover two badminton racquets at once. The only negative is that, as the red stitching on the elevated grip doesn't stretch all the way to the top of the grip, the second badminton racquet you wrap will show no red stitching towards the top of the Since I didn't want to have to buy another grip, this wasn't a big problem for me. Choosing the textured grip instead of the weave is the better option if you plan to cover two badminton racquets using one grip. I also bought one of these grips. The black stitching would have been better aesthetic than the red stitching. While the elevated design on the grip can improve grip for some people, I can also see how it can hurt others. A closer look at the grid will reveal whether it is quality or not.

Loretta Dorsey

| Feb 23, 2021