15116 9mm Luger Precision SNP cp
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
These are miles ahead of the competition. The Tipton has flaws in its construction and isn't as well-made. My first five A- grades are still in my possession. I've been using zoom caps for four years and they're still working for me.
Although the PPQ has been known to have chambering issues in the past, these 9mm snap caps function flawlessly in our LC9 and Glock 17 Gen 4 pistols. In each gun, I must have cycled them 50 times or more. I'd also use your gun to check for other rounds. According to what I've read, some ammo will jam, and the slide will slightly stick back. Keep an eye out - be safe.
These are currently in my possession. 40 and . 45 and a seven-year-old daughter. There will be no issues. There is only one of the. Rubber primer had worn out on 45. I'm definitely going to get the 9mm. Dummy rounds that are fantastic.
If you go out and buy five different brands of 9mm ammo, they'll almost certainly all be different lengths. When it comes to snap caps, it's best to keep them as short as possible while still cycling. In a short-chambered gun, the last thing you want is a jam. The extractor is the only thing that helps with the ejection, unlike a live round.
Selected User Reviews For 15116 9mm Luger Precision SNP cp
I own a Glock 17 as well as a Glock 26. In both firearms, these jam 100% of the time of the time of the time of the time of the time of the% This may work in other firearms, but it is not recommended for use with a Glock. I discovered this after the return period had passed because I was able to live fire and had purchased these for those times when I couldn't.
I needed some dummy rounds to protect the striker from dry firing, and the only other option appears to be Tipton's, but I believe they have problems with primer strikes flaking the brass. I had only cycled a couple of rounds of these azoom ones when the finish began to flake off around the rim where the extractor catches it. Scraping was also noticed where the magazine lips come into contact with the round on the sides. After only a few cycles, this was the result. I can't imagine what would happen if they were used significantly more frequently. Thank you, Amazon, for your excellent return service; I don't want to have to clean my gun all the time because of the accumulation of material. All of this was accomplished without firing a single shot. It's not worth the trouble! I'll simply get some ST Action Pros and use hot glue to fill in the primer hole. I've done this before with their 38 special dummy rounds, and the results were good. They're a lot tougher than these azooms with an anodized aluminum finish. Take our advice and buy something different!.
In my Springfield XDS 9MM, it works and cycles perfectly. br>br>EDIT: Countless dry fires have been avoided thanks to this product. It's been cycling flawlessly in my gun for quite some time now. However, I must point out that the rim of the bullet/snap cap is beginning to show signs of wear. Overall, I'd still recommend it because it's greatly improved my trigger pull and helped me get a better feel for my gun! I'd also like to point out that these caps have come in handy for teaching new shooters how to rack the slide, eject cartridges, and other fundamentals. br>br>UPDATE 4/11/17: I've added a Smith to the mix. To the family, Wesson PC Shield. The rims of each snap cap are getting a little worn down, but they're still working perfectly in both guns. I cannot express how much this product has aided me in improving my trigger pull and practicing with both guns; it is still a worthwhile investment!.
These snap caps wouldn't cycle in a new Glock 19 for some reason. After the second round, they severely jammed the pistol on two separate occasions. I was afraid of damaging the pistol if I tried again. The item has been returned.
When it comes to aluminum vs. steel, failure is a foregone conclusion. It didn't let the slide go once, didn't cycle through the magazine once, and didn't even make 100 dry fires. When the firing pin hits the primer on a Glock, you must pull the slide back about a half to a full inch for the trigger bar to reset and catch the firing pin. br>br>All I ever did was put it in the barrel, ease the slide forward, and fire; to reset the firing pin, I barely eased the slide back enough to reset, then ease forward. br>br>So when the slide is pulled back, the barrel drops, and this snap cap slides on the firing pin face and into the ejector. br>br>Before I even got to 100 dry fires, the ejector ripped a chunk out of this snap cap. Paint was removed from the barrel where the snap cap slide was located, as well as the firing pin slide face. This is not something I would recommend. br>br> First, because it's aluminum, your ejector claw will rip a chunk out of it, making it difficult to move the slide, and then the paint will peel away. br>br>However, the rubber firing pin stop works perfectly, but the aluminum and paint do not. Thank you. br>br>.
I've decided to make another purchase. I bought the 9mm snap caps nearly a year ago and have used them for dry fire practice, extensive emergency reload drills, and load/unload practice with new shooters hundreds of times. They've performed admirably in my Sig P320, Glock 19, and SCCY CPX2 pistols. I don't believe they could damage your firearm because they are made of aluminum, which is softer than the metal used in your firearm. The "primer" is rubber, and mine still looks good, but the rest of the round will wear out over time due to repeated loading and cycling. That's not a problem for me because I'd rather they were made of softer metal so they wouldn't damage your gun. I'm ordering 10 more rounds today because the ones I have are pretty worn out, and one of them was starting to jam one of my pistols every now and then (but only after I'd used it hundreds of times and it was showing signs of wear). Please remember to remove all live ammo from your immediate area before dry practicing, and to have a deliberate end point to your session so that you do not accidentally shoot a hole in your wall! I haven't done so yet, but it's a possibility!.
I had mixed feelings about these at first, but they're probably the best there is for the job. Yes, they do not always chamber as well as a smoother, heavier brass cartridge. Especially when it's brand new. These may not be for you if all you want to do is sit and slowly rack the slide while pretending to be a tough guy. Yes, you will notice that the rims begin to get chewed up almost immediately. You don't have to baby them or operate the action slowly to get them to work; they'll work every time. An extra drop of oil on the extractor might be a good idea if you're anticipating heavy usage, such as when setting up a new trigger connector. Especially when it comes to a Glock. Because these aren't live rounds, they don't work exactly the same way. I'm confident that the primer pocket's material is as tough and dependable as it gets. When you pull the trigger, the firing pin sounds and feels well protected. They're made of aluminum, to be sure. That means if you're determined enough, your gun can chew them up. But at the very least, the gun will not be harmed in any way. It's important to remember what these are. A tool for maintenance and possibly some training. These aren't intended to convert a firearm into a toy. They do, however, a good job of doing what they're supposed to do.
Related Products For 15116 9mm Luger Precision SNP cp
