Bowmaster Press G2 Portable Bow, Silver
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
I haven't had any issues with it on a 70lb 2014 bowtech experience, though I do use bowmaster's limb adapters for the beyond parallel limbs.
I've used it on bows ranging in length from 32 inches to 40 inches, but it's not long enough for crossbows.
Yes, absolutely!
Selected User Reviews For Bowmaster Press G2 Portable Bow, Silver
Junk. The two ends that rest on the bow limbs should be significantly longer. They are too short and create a dangerous situation because they move when compressing a bow, and because they are so short, they compress very unevenly on the limbs, causing twisting and damage to the cams, as well as getting close to the inside edge and pulling out. Because it doesn't work well, this product ruined my bow by slipping and sliding all over the limbs, twisting them. Bow limbs should be compressed evenly at the ends, not in the middle or at the point where they attach to the frame, which is exactly where this garbage product ends up when you engage the system. My cable broke at the U where the tension is distributed to both sides, as well. It's a garbage product that I can't recommend.
It's not really usable without the accessory brackets, which, in my opinion, should all be included for safety reasons. It receives a four-star rating as a result of this. On any bow, I would not attempt to use this without the brackets! So far, there have been no problems with the press working on two Diamond Infinite Edge pros and a Bowtech tribute. I wouldn't be afraid to use this to take a full bow on occasion, as long as proper precautions are taken. Overall, this is a good press that does what it's supposed to do. br>br>Another thing to keep in mind is that To keep the riser and guide cables from scratching, drape a towel or something similar over them. If your cables aren't protected, the threads will try to eat them away. It's also quite oily, which I didn't want all over my strings.
At some point, everyone must release their bow! From installing a peep to a new drop away rest to serve in the cord, everyone's bow will eventually require new strings. Even if you take your bow to the pro shop on a regular basis, you never know when a peep sight will be knocked out while you're driving to a hunt. Minor mishaps occur, and this kit serves as an excellent first-aid kit for your bow. Please keep in mind that this tool is only intended to perform minor bow maintenance. It's impossible to dismantle a bow completely without putting yourself in danger. You'll also need brackets if you're using a split limb bow. But I used it to secure my peep and serve the cord on my drop away rest, and it worked flawlessly and was far safer than the ratchet straps I'd seen in videos! That is listed as a suitable bow press by many bow manufacturers. However, keep in mind that some manufacturers do not. Bows with limbs that aren't parallel to one another, in particular. The first time you use this tool, it practically pays for itself! I paid more than this press to have two peep sights installed at my local shop.
I purchased it, tried it out, and was terrified. He's such a knucklehead. I had to compress the bow a couple of times to get it to work, but after the second time, I realized my fears were unfounded. I mean, you're compressing a bow, and there's a lot of kinetic energy involved, but by the time I'd done it twice, I realized there was no justification for my fears, and I'd definitely recommend this tool for use in the shop or in the field. I can see how I'd be wishing I had it if I forgot it at home and needed it in the field for a string replacement. Imagine having to cancel a costly hunt because your bow string became tangled and frayed. This device could be used anywhere and could potentially save you or a friend a trip.
This is a fantastic device that is incredibly simple to operate. To go with it, I also ordered a wide limb adapter. Keep an eye out for the limb adapter; it was "too wide" for both of my bows. There is a regular (non-wide) version, but it is not available on Amazon. Aside from that, the press is a breeze to operate. I'd never used a bow press before, but I needed to replace the strings on two bows, and I was quoted $200 for each replacement, as well as a new dloop and sight. I took a chance and decided to do it on my own. I was terrified of compressing the limbs, but it was actually quite simple. I have a pse brute and a parker wildfire, and it worked great (again, wish I had the regular limb adapter). I feel like I saved a ton of money doing it myself, and it wasn't nearly as risky as I thought it would be. It's also a huge help when it comes to setting up a peep site, which I HIGHLY recommend.
It is effective. To paint and rebuild my bow, I dismantled it completely. If you have solid limbs and use it below the cams as instructed for those models, however, it will hit your rest. This wasn't a problem because my bow was completely disassembled, but now that it's back together, I'll either have to remove my rest or purchase split limb adapters and use it that way. I intend to purchase the adapters and use them in this manner.
br>br>It works well and is error-free. I had no trouble compressing my split limb bow and removing the strings and cables. I never had any concerns that the press would come undone or slip. br>br>I would strongly advise anyone interested in servicing their own bowstrings to purchase this press.
Each and every one of the five stars is completely justified. What could you possibly want for $40? This bow works well with my evolve 31. I put the soft pads on the cable where the wide gap limb adapters hit my cables and turned the limb bolts down four turns. To keep my peep in place, I added a few twists to the string. It's well worth it to avoid having to go to a bow shop. I considered giving it four stars because it is inconvenient in that it does not hold the bow for you, but then I remembered that it was only $40. It's a good investment.