Fitness Reality 810XLT Super Max Power Cage with Optional Lat Pull-down Attachment and Adjustable Leg Hold-down

The purchase price was $169 (I purchased it for As you can see, it can hold up to 800 pounds, has a lot of space, does not need to be bolted down, and is very sturdy. People of all ages working out at home will find that the 800 pounds of capacity is plenty. As a reference, using strengthlevel's calculator, if you could squat 300 lbs, you could squat more than 65% of men between the ages of 24 and 35 The number of people who strength train is 39. There is no need to cover your home gym with a bunch of equipment. A brief history As a 58 year old, 6'0", 195 lb man looking to improve my strength, I want to develop my StrongLifts 5x5 is a company that I started back in December 2016. Nevertheless, I was using an old smith machine for squats and bench presses, which is not recommended as it restricts your movement and does not make full use of your Therefore, I was looking for a rack with a power system and wanted to Eventually, I want to attain 360 lbs deadlift, 270 lbs squat, 200 lbs bench press, 120 lbs overhead press, and 180 lbs barbell row for 5 reps, and maintain that level as much as possible. The values I hold near and dear (I'm nowhere close to them now, but you need them). After spending weeks browsing the web for racks and coming up with Rogue R-racks I decided they were the best You can either buy the 3 ($820 shipped) or the They weighed over 200 pounds and had to be bolted to the floor for stability, so 3 ($420 shipped) were probably overkill for me. After evaluating it thoroughly, I decided to purchase the Fitness Reality 810XLT because its price was so unbelievable. As a comparison to Titan T-shaped sticks, I find it very favorable The cost is $319 for 2 units. In short Shipping My order for the rack was placed on February 4, 2017 with Amazon. I received it on February 10 after it was delivered free of charge on February 6. I ordered a box having dimensions of 79"L x 13"W x 10"H and weighing My package was delivered to my garage by UPS. There are single-wrapped packages for each part in the shipment. There is one broken part, which is a foot pad (part #486 on the Customer service was emailed by February 11 using the email address provided in the owner's manual. In no time at all, they sent out an automated email. In a response dated February 14, they indicated they had submitted a replacement order for the damaged part. The company did not communicate with me for a week, so I sent them an email on Feb 21 and they responded with a tracking number the very same day that the part would be shipped. It was installed on February 25 after I received the part. There were actually two plastic foot pads included with the package. Assembling the device Putting the assembly together was simple. My first experience with these instructions was that they were extremely clear and thorough. Each bolt has a step number on it! As soon as three or four threads appear through the nut, I tightened the bolts. The steel could be deformed if you tightened it too much. The use of a 17mm socket and box wrench speeds up assembly. However, it comes with a cheap screwdriver that I did not use. Since it is not necessary to bolt the rack to the ground, I didn't do so. The dimensions are There is a 46 inch wide and 50 inch deep footprint on the rack. There are 83 3/4” between the bar and the floor at the top of the pull-up bar. A side measures 78 3/4" wide by 84 3/4" high. 42" wide between posts and 24" deep between posts are the dimensions of the working area. It has 19 one" diameter holes that are located three inches above the floor and start 13 1/8" from the floor. Every third hole has a small "U" notch for identifying the level of the post. The rack has two solid steel safety pins with diameters of 1" that are 32 1/4 inches long, so that the whole rack is 24 inches between posts and gets its 3 1/4" width from the outside of the bar. There are seven safety pins in this package. The weight of each is five pounds. It contains two safety hooks, including a 3 1/4" bar catch, with a length of 6 3/8". They weigh 1 oz each. There is no weight difference between them. There are chrome safety pins and hooks on the rack as well. * Br>The total weight of the assembled rack is Nevertheless, I was not able to measure this by There is a capacity for a single load This unit is rated for a maximum weight of 800 pounds. This is a 2x2 steel frame. To measure the thickness of the posts, I used a tape measure. There is no value for it. A gauge of 14 steel is formed from a sheet that is 0. 86 inches thick. Though I did not drop a load on the safety bars, I think 800 lbs would be enough to hold them. I was concerned about these things before buying the house 1
The height can be adjusted with 19 A Titan T-shaped vehicle The second has 28 and the third has a The Westside 1" hole pattern is used on 3. It works for me because of the pattern of holes in this rack. My bench safety pins are set at hole #6 from the floor (my bench is 20' high) and my squat method is To create the safety hook positions, I use hole #11 for the bench, hole #17 for the squat, and hole #17 for the Marking the positions of the electrical tape is how I use it. Two additional points From the description on Amazon, I wasn't sure how many rack posts there were between the side posts. As far as size is concerned, it is 24". The Rogue R3 is 24". It is recommended that you use a rack that measures 22". 3
3. 2 Both the back and front posts of the rack are equipped with stability bars. It was my expectation that they would get in the way, but they don't. I use the front posts outside the rack for overhead press and inside the rack for squats as they don't interfere with bench positions. 5.
A stable economy. As soon as the rack is bolted together, it has ridges. I did not want the racks to be permanently mounted to the floor, so I could move them if I needed to Although I wanted stability, I did not want it to fail. Based on my research, I concluded that the rack has extremely good stability. My method of testing it is as follows This is a. In an attempt to lift the rack, I attempted to stand on the safety pins with my foot on the pull up bar while holding the rack and shaking it from side to side. I was not able to move the rack at all. It is possible to shuffle or slide the rack to some degree if you work hard The b-word. When I tried shaking the rack, I racked an empty bar on the safety pins, then stood on the bar and the back stability bar and grabbed the pull-up bar, while trying to shake the rack from No movement could be made by the rack. that will be lifted by the rack will probably be less than 300 lbs, so I expect that this rack will be strong and stable. This is 5*. It is not possible to store plates have already purchased a plate tree, but it might be more convenient to store it on the rack, as long as it doesn't hinder my lifting. If I think I need them, I may purchase a couple of Titan plate holders. A few attachments Titan T-shirts are on sale at Titan T-shirts There are 2 J hooks on each side, For squats and overhead presses, I install them in the front posts of the rack. On the back posts of the bench, I keep the original chrome hooks. Thus, I am assuming all the responsibilities of Titan T You will be able to attach two attachments. As of now, I have used the rack successfully for 6 StrongLifts 5x5 workouts and can vouch for its quality. A comparison of The FR810 Titan T-R is about to come out A Rogue Real Estate II.

Angelina McGee

| May 09, 2021

In this case, I am not going to review it as squat cage since there are enough reviews here that confirm it is sturdy, will hold weight, and has the proper dimensions to get your workout done. Aside from that, I am not an expert in How can you assemble this thing, and how do you do it? That is the question I will answer in this review. Here is a picture of a bench that is not the same bench that you can purchase with this, but a different bench altogether. If you are tall and assembling this in a place where you don't care about the walls or floor, you may be able to do it as a single person, but I couldn't do it in my apartment due to the walls and the floor. There is nothing difficult about it at all, and the parts are packaged quite well, but it is rather tall and awkward to assemble. I am not including tightening the 40 bolts in the two hours I spent assembling. Because of the need to go to Home Depot and purchase better tools than those included in the kit, I did not do it up until today. In the photo I have included a 17 mm socket, a ratcheting handle, and a 17 mm wrench that I used for this project. Due to the fact that you need to hold both the nut and the bolt head, you require two tools. The best thing to do is to get something which ratchets. While these tools were helpful, it still took me some time to tighten up the bolts. Once they were tightened, the rack seems As you can see in the photo, I attached the TRX cables, and I think the 45-degree leads work with the TRX With the 200-pound bar on there, I can hang my weight from the cables at any angle, and the cage won't fall over thanks to the cables. My weight is about 250 pounds, so I do not think this can be tipped.

Piper Jarvis

| Apr 14, 2021

In a nutshell, Initially, I had no idea what to expect in terms of sturdiness and how strong this rack would be, just based on There is no doubt that it is of very high In my experience, the bench took me about 10 to 20 minutes to assemble alone and it comes with tools, but I suggest you get your ratchet set or better tools in order to make the process go quicker. This item is in perfect working order with no shakiness or wobble, and overall feels very well made. The bench is a big hit with me. I took two hours to set up the rack with my help, and we were cautious to set it up according to the manual. This was the first time ever in history of instruction manuals that the manual was so clear. Fitness Reality did a great job of explaining how to do things in a way that was easy to understand. Even on the basis of that, I would recommend it. As with most racks, this one came with the tools you need to install it, but I recommend purchasing a ratchet set as well since there is so much more hardware This rack is very sturdy once you have it tightened properly it does not shake or wobble once it is tightened. It feels robust and substantial. It is great that the catch bars are as good as I thought they would be. One thing I would suggest is that you look into buying a set of J-style earplugs It is better to use J hooks instead of the original small bar holder. J hooks are stronger and safer, so it is wise to use them. I like the fact that this pull up bar has multiple grip options and that it feels good in my hands. If you need advice on what to do after receiving this? Feel free to contact me! It would be best to get plate holder bars from another company since the one's from them I've heard bad things about, and jhooks as the default bar hooks that come with the bar are hollow and I wouldn't trust them to carry a lot of weight. It has been a pleasure doing business with you and the quality of the frames is outstanding.

Kai Rodgers

| Jul 04, 2021