Restaurant Maid - Restaurant Software (Ships on a USB Flash Drive)

In short, yes.

POS systems require some specific hardware for operation. Here are some suggestions for related or optional hardware. Even though these optional POS upgrades to your PC also make things a lot easier, help you accomplish tasks a lot quicker, and make you appear more professional in front of your customers, they are not necessarily required, the software will run on just a standard computer without any POS upgrades. The following are the primary reasons for your choice. Scan barcodes using a barcode scanner Although technically all USB and PS2 barcode scanners should work with our software, watch out and do not buy any serial port barcode scanners since these are very old or are on old stock because they are very old or have been discontinued. All barcode scanners that are USB or PS2 do not come with drivers since they are plug-and-play devices Many are plug-and-play compatible, however, if you encounter one that requires drivers, make sure it includes drivers that are compatible with Windows. It should be fine so long as you purchase brand new equipment because our software is compatible Then, you'll need to say "2. Printers that print receipts at the point of sale You can choose dozens of printers from the vast selection we offer, and our software works with most brands including POS-format! There are many other brands, such as Epson, Ithaca, Samsung, Star, and more. Regardless of whether your printer was purchased new or used, make sure the printer comes with Windows drivers, since our software is 100% Windows and will only work with properly installed Windows compatible devices, so just ensure the printer works for your version of Windows and that it is equipped with its Another thing to consider in the future, if you consider purchasing an electronic cash drawer, is that you must verify that this printer will be able to open a cash drawer. If you intend to purchase this cash drawer, you must confirm that the printer will work with the cash drawer. Remember that the cheapest and most affordable printers are usually good just for printing receipts, not for putting on the shelf. It is time to update your dated Windows version. There are many older printer models for sale at a very low and affordable price (they may even be new printers. However, given their old model years), these printers can only be used with Windows 7 or Windows XP, or some other older operating system. So if you have Windows 8 or 10, you won't be able to use that printer unless a driver is found. Your Windows version needs an aftermarket driver of this type. Although that quick-fix might seem enticing That printer will only work a little on your Windows, and it won't be compatible with our software (our software requires the original factory drivers in order to work correctly). Please make sure the printer comes with the original factory drivers and that those drivers and that printer model will be able to be installed with the original out-of-the-box software. As you're aware, Your exact version of Windows should be able to use the factory drivers. In addition, pay attention to the architecture of your Windows, whether it is 32bit or 64bit, because many of the "affordable" printer models available come with drivers that will only work with 32bit Windows, so if you have a 64bit Windows, do not buy them. In other words, when you discover a great deal on a receipt printer, make sure it is working with the factory installed drivers, on your exact Windows operating system - rather than merely trusting that the printer works. This means that these great deals don't work on anything newer than Windows 7 - an all too frequent occurrence. When you have let's say Windows 8, you will have a lot of problems due to its 32bit nature. The 64-bit version. The three points are 1.*br> 2. A cash drawer that uses electronic technology You must have a receipt printer that is compatible with an electronic cash drawer in order to use it (to open it automatically on sales). Point of Sale systems do not have an electronic cash drawer connected directly to the computer, but instead are controlled and connected through the In this case, it is always recommended that you buy the cash drawer together with the receipt printer You should make sure the cash drawer is connected to the printer (and not the PC) and to ensure that they are fully compatible with one another. 4. *br> *br> A swipe-reader that accepts credit cards / magnetic cards It is very useful and can be used for a number of purposes a) Swiping credit cards for customer purchases (rather than manually entering every single bit of information from every The following steps are possible a) Swiping security clearance cards (manager's passwords can be printed A) Swiping employee security clearance / log in / time clock cards (the employee's ID # can be impressed on the magnetic card). It is technically true that all USB and PS2, "3 Track" magnetic card readers will work with our software, but do be cautious and beware of buying serial port magnetic card readers, as this is a very old standard, therefore these would be very old or No driver is included with the USB and PS2 versions of the "3 Track" magnetic card reader because they are plug-and-play devices The device should be plug-and-play compatible, so reading credit cards shouldn't be an issue, but if you plan to run it on something that requires drivers, make sure the drivers are Windows compatible. It should be fine so long as you purchase brand new equipment because our software is compatible The fifth point is The following printers can print barcodes Though many smaller companies do not use this device, some more professional firms are more inclined to invest in a barcode printer. Although the task of printing barcodes can be accomplished with a regular printer with good printing capabilities, some more professional firms still prefer to use As is the case with a standard printer, barcode printers do not require any special setup or instructions. You just purchase it and install it on your PC according to its manufacturer's instructions and you can start printing professional barcode labels right away. 6 ** Break up each paragraph as follows *br>*br> The iPad Touch Screen monitor is equipped with the following features It is not absolutely necessary, but the use of a Touch-screen is more convenient if the mouse and keyboard slow you down Monitor for displaying computer screens. Having the Windows drivers installed properly on a touchscreen monitor will allow our software to be compatible right from the beginning. A resolution of 1024x600 or higher is required. Our software provides an online training program as well For touchscreen devices, a screen keyboard is available. The following is the content of the following line *7. An example of a pole display is The software supports POLE DISPLAYS that are 100% Epson Compatible (and works with EPSON POS D101 commands) and can be connected via a COM Port. It is recommended that you purchase the POS-1000 XP8200 models), as most compatible to our software and most thoroughly tested, are generally the most compatible, as are any other models or brands that support EPSON POS D101 mode commands and work with USB or a serial interface that emulates The following is a summary of what follows 9. You can weigh yourself using the following scale The ECR-compliant weighing scales that our software supports can be integrated with our software A serial port connection / interface is formed by using the NCI Serial Communication Protocol. Scales that operate in this mode are compatible with our software, which is why we recommend them. It is the "ECR -" This is the NCI protocol/mode). This mode of work or protocol is EPCS (ECR "NCI") encompasses many weight scale brands and models. To find scales that have ECR settings, you need to look for a setting, mode, or protocol called ECR. The "NCI". In addition, keep in mind that digital scales usually have multiple modes that they can work with and that the modes can be toggled with a switch or through their software drivers, where you can set them or change them from one to another (to select which mode to utilize). You should understand, then, that just because a weight scale is advertised to work in the mode that you need, it doesn't necessarily mean it will be set up to work in that mode right out of the box. National Cancer Institute). br>Here are some other modes of work for scales (but those may not work with our software) The 8213-area code is only available to 8213-area code hosts - (usually associated with the Sharp brand)*br> This type of product is asymmetric (usually associated with the Swintec brand)* It's a MA *Also compatible with TEC® 1535/1595 (usually associated with the ATT brand) This would be the AT&T (usually associated with the AT&T Is a T trademark)*br>o4000 - i The Olympia brand usually has 5-point scales (usually associated with the Olympia brand)*br> Now we are not telling you to stay away from these brands, because normally weight scales from these brands will have the same feature. These units can be used in up to six mode of work, and all that needs to be done is to set them There is an "NCI" and that there is an "ECR" It is an option to use NCI. * * 2. What happened to the accounts after the software split them? The question you asked is unclear to us. Do you think you could rephrase that please? 2. 3. Is it possible to use a personal security number for the customer's invoice?
In regard to the Invoice ID or Invoice number, you can set the software to start from an appropriately numbered field (which you specify) and the software will continue to automatically generate ascending numbers following 4 *br> In addition to CLOSE REGISTER/GENERAL REPORTS, our software can generate Customized Reports for employees, products, classes and departments, for the processing of credit cards, inventories, accounting reports,

It is necessary to have an internet connection for the installation. My sincere thanks go out to