* Disclaimer: OveReview is reader-supported. We earn commissions from qualifying purchases
Hylaea Water Brass Misting Nozzle, Outdoor Mist Nozzle with 1/4'' Slip-Lock, Thread 10/24 UNC Tees 8pcs and 0.4mm Orifice Nozzle 10pcs and 1pcs Plug for Cooling System Hylaea Water Brass Misting Nozzle, Outdoor Mist Nozzle with 1/4'' Slip-Lock, Thread 10/24 UNC Tees 8pcs and 0.4mm Orifice Nozzle 10pcs and 1pcs Plug for Cooling System Hylaea Water Brass Misting Nozzle, Outdoor Mist Nozzle with 1/4'' Slip-Lock, Thread 10/24 UNC Tees 8pcs and 0.4mm Orifice Nozzle 10pcs and 1pcs Plug for Cooling System Hylaea Water Brass Misting Nozzle, Outdoor Mist Nozzle with 1/4'' Slip-Lock, Thread 10/24 UNC Tees 8pcs and 0.4mm Orifice Nozzle 10pcs and 1pcs Plug for Cooling System Hylaea Water Brass Misting Nozzle, Outdoor Mist Nozzle with 1/4'' Slip-Lock, Thread 10/24 UNC Tees 8pcs and 0.4mm Orifice Nozzle 10pcs and 1pcs Plug for Cooling System Hylaea Water Brass Misting Nozzle, Outdoor Mist Nozzle with 1/4'' Slip-Lock, Thread 10/24 UNC Tees 8pcs and 0.4mm Orifice Nozzle 10pcs and 1pcs Plug for Cooling System

Hylaea Water Brass Misting Nozzle, Outdoor Mist Nozzle with 1/4'' Slip-Lock, Thread 10/24 UNC Tees 8pcs and 0.4mm Orifice Nozzle 10pcs and 1pcs Plug for Cooling System

Hylaea Water Brass Misting Nozzle, Outdoor Mist Nozzle with 1/4'' Slip-Lock, Thread 10/24 UNC Tees 8pcs and 0.4mm Orifice Nozzle 10pcs and 1pcs Plug for Cooling System Hylaea Water Brass Misting Nozzle, Outdoor Mist Nozzle with 1/4'' Slip-Lock, Thread 10/24 UNC Tees 8pcs and 0.4mm Orifice Nozzle 10pcs and 1pcs Plug for Cooling System Hylaea Water Brass Misting Nozzle, Outdoor Mist Nozzle with 1/4'' Slip-Lock, Thread 10/24 UNC Tees 8pcs and 0.4mm Orifice Nozzle 10pcs and 1pcs Plug for Cooling System Hylaea Water Brass Misting Nozzle, Outdoor Mist Nozzle with 1/4'' Slip-Lock, Thread 10/24 UNC Tees 8pcs and 0.4mm Orifice Nozzle 10pcs and 1pcs Plug for Cooling System Hylaea Water Brass Misting Nozzle, Outdoor Mist Nozzle with 1/4'' Slip-Lock, Thread 10/24 UNC Tees 8pcs and 0.4mm Orifice Nozzle 10pcs and 1pcs Plug for Cooling System Hylaea Water Brass Misting Nozzle, Outdoor Mist Nozzle with 1/4'' Slip-Lock, Thread 10/24 UNC Tees 8pcs and 0.4mm Orifice Nozzle 10pcs and 1pcs Plug for Cooling System
$ 5.29

Score By Feature

Based on 554 ratings
Easy to use
9.09
Easy to install
8.88
Comfort
8.30
Value for money
8.08

OveReview Final Score

How Our Score Is Calculated

Product Description

Includes 1 * 1/4" PE Misting Line (20FT), 6 * Tee Connectors, 7 * Brass Nozzles, 20 * Cable Tie, 20 * U-Clip Adapter, 3/4" water tap, In the Mist Cooling System, the faucet joint complies with US standards, many brass misting nozzles are used, as well as flexible and UV-resistant tubes made of black PE. A perfect seal, no blockages, no rusting and long service life.
you with a cool space for outdoor activities, creating a cooling environment that will cool the surrounding air to 20o Celsius within minutes. In the hot summer, you can enjoy the fantastic outdoor view.
can be used for many purposes, such as gardens, landscaping, greenhouses, humidification, outdoor cooling systems, air purification systems, swimming pool misting fog cooling, and outdoor water play, which is not only fun but also refreshing. Playing water has never been so much fun in a party or crowd outside.
Misting System Kits are preassembled, and the T-connector can be rotated. In spite of the hottest summer weather, this misting device delivers a fine mist to cool the air considerably. It is easy to assemble and ready to use in less than 10 minutes.

Questions & Answers

Do I need to make sure the mist is very fine? I want to use it for outdoor dining so don't want to get soaked with a heavy mist. ?

It wouldn't be a good idea to use it directly around the food area because it would be a little too much water. Despite the light mist, it is still cold.

Can the misters be assembled beforehand?

Consequently, the holes for the brass nozzles are prefabricated, so you can just screw them into the holes. Furthermore, the hangers included with the kit are preassembled, easy to use, and reusable An ordinary hammer is all that is needed.

Is there a way to plug up some of the holes in the nozzle? A M5 screw seemed to fit, but still leaks a lot. Has anyone found a completely leak-free mount?

If you need plugs, Ace can provide them

Selected User Reviews For Hylaea Water Brass Misting Nozzle, Outdoor Mist Nozzle with 1/4'' Slip-Lock, Thread 10/24 UNC Tees 8pcs and 0.4mm Orifice Nozzle 10pcs and 1pcs Plug for Cooling System

Spray of fog is good
4/5

There are currently four temporary screens at 8ft height and it's 4pm, North Texas, 100° with a 5mph breeze and 10mph gusts, 30% humidity, and a patio facing west. (In case someone wants specifics c) If you don't have 8opsi or above, these will still work My house has an 80 psi water pressure (probably a little less to the backyard outlet) and if anything in the house drops it, they mist a little too much. It might be helpful to adjust the height of them (higher) to help lower the pressure for In my testing, I could not get quite enough cooling on the outside of my beam. The cooling I was seeking ended up on the inside of the beam when I moved them. If you look closely at the slate, you may be able to see that it is wet. It is only the top table that is wet, and about 1/4 of its surface. There was a pressure drop, but only half of its surface is wet. So far, I have been able to get a little With this system, you can easily connect it to anything else. If that does not eliminate the drip or Teflon tape, I might try using that. For the price I think it is a good buy. I have hard water and will probably add a calcium inhibitor to it I am planning to install a line filter in the future. In order to make a purchasing decision, I read not too many reviews. There is already spacing and installation of the "heads" on this kit. It just takes a few screws to get the brass nozzles to work. Water is sent out through the first nozzle *10 feet from the supply connector and every 2 feet thereafter. All nozzles can be adjusted so that their spray angle is adjustable. As well as the zip-up, there was a small pocket In the case of ties and nails- You can find mounts in this section. Surely the negatives I observed were due to the lack of water pressure to produce a good fog and not a garden mister effect. They have certainly turned my uninhabitable patio into a paradise in the afternoon hours. BREAKING UPDATE Only the quick connect adapter that comes with the set will seal properly, which I've found to be the most important factor. My tests were done with another brand of female quick connect adapter (Expert Gardener plastic), and I did not encounter any leaks. Despite having odd threads, it will seal with your typical hoses but not with this one.

Aleah Kaiser
Aleah Kaiser
| Feb 16, 2021
Keeping it cool is important
5/5

Since I had been using another brand of cooling mister for the past two years, I decided to switch to something that would I think this was a very good solution that did its job. Here in NY this summer there were a few days where the temperature reached 100 degrees along with high levels of humidity, so sitting in the yard was not pleasant. Mister is not compatible with this Despite the fact that the sun went down just after noon on the days we sat in the yard, we felt perfectly comfortable throughout the time. One issue I had was a cracked connector upon receipt, but after contacting the company, they sent me a couple of new ones. I was a little concerned that they would be hard to replace when I received them. No, that's not what happened. This is a 20 second process to replace the connector. As soon as I replaced the one connector, I had no further issues and the system has been working great. It is easy to wrap it around the entire perimeter of my 12x12 pop-up gazebo and keep it cool all summer. An excellent system in all aspects, and I'd buy it again in a heartbeat.

Henley Adkins
Henley Adkins
| Jan 30, 2021
It is an excellent product, and it is very easy This is even more challenging for me
5/5

Previously, we had a tin pergola covering our patio. These 3M adhesive clips were used to rig up the mister. The instructions are simple, and assembly is easy. The mist is great, and the whole product is fantastic. I did experience some confusion while trying to align all of the misters to point downward but quickly noticed If you start in the middle, you can't change the direction because the misters to the right and to the left will also move in different directions. In an endless loop of changing directions of one only for another to move out of position, I've found myself caught in a seemingly endless loop of confusion. The following tips will help you. Work your way around the mister to adjust it from one side to the other. Be sure to hold up the pipe/hose to the left of the mister always. By doing so, you can change the direction of the mister head without affecting the direction of those It should make sense if I say so.

Rachel Brady
Rachel Brady
| Feb 10, 2021
Seeing my wife happy makes me happy as well
5/5

It's a no-brainer I was able to install it very easily. There was a time when all the flowers were dying, but everything came back to life after running the system for a day. My only wish is that it came with more plus points since I ran the hose up the hanging plant hook. This system is made up of approximately 100 feet of 1/4" On Amazon, there is a price of $99 . Amazon offers a waterproof timer with rain sensor (30). Three plugs for the ends $9. 00 on Amazon) and six beers (in my refrigerator). It is the most important thing at the end of the day. I am proud of my wife!.

Kalel Parsons
Kalel Parsons
| Jul 05, 2021
This is a great deal
4/5

My only suggestion is not to use them over a glass table as the droplets will show and stay until the table has been wiped clean. These were super easy to install and they produce a fine mist. In the heat of AZ, this is a small price to pay to stay cool. It does not seal well to the outdoor faucet, and I find it to be a genuinely disappointing product. There is no matter how much I screw it on, the water If I was going to fix it with a washer, I would. But I want my dog's water bowl under it, so it's not an issue for me.

Christina Dominguez
Christina Dominguez
| Jul 31, 2020
It is specifically designed to be used by our goats during times of extreme heat
5/5

I like the ease of installation and the fact that it works great. A nice continuous mist of water is released. I found the software to be a perfect match for what we needed. Animals can no longer survive without it.

Tristan Snyder
Tristan Snyder
| Dec 25, 2020
A great set of Misters! Prior to this, I had a small (10ft) mister that my father had given me, but I wanted an item that could cover my entire I was looking for the right mister system for my needs
5/5

You have about 10ft of space from the spout connection to the first mister, which gives you enough room to run it up a wall (from water connection to roof or patio). It has been great to have such great water pressure. It is a bit difficult in Arizona to push through the misters due to the amount of pressure, but I haven't faced any challenges. - The mister heads are movable in and out of the way, so you can direct the mist in any direction you want. • The system was very easy to install when it arrived at my house. They came with nail in fasteners for the line. All in all, it probably took about 30 minutes. This was a great purchase that really helps keep the porch cool in summer months with high temperatures of over 100 degrees.

Jakari Sharp
Jakari Sharp
| Oct 18, 2020
There is no need to be fooled by the price, it works like it cost me $100
5/5
Roger Acevedo
Roger Acevedo
| Jul 29, 2020

Related Products For Hylaea Water Brass Misting Nozzle, Outdoor Mist Nozzle with 1/4'' Slip-Lock, Thread 10/24 UNC Tees 8pcs and 0.4mm Orifice Nozzle 10pcs and 1pcs Plug for Cooling System