Ridged Slats Slat Depot Single Wall Bottom Locking Privacy Slat for 3', 4', 5', 6', 7' and 8' Chain Link Fence (3ft, Brown)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
In every box there are 82 slats, as well as 3 pieces of 42-inch For 10 feet of standard chain link fence with a two inch diamond, 82 slats are required. The track will be left over in small amounts. For lighter chain link with a larger diamond, you could use fewer slats (10 feet can be as few as 74) The track will be used to its full extent, while there will still be To overcome this problem, we strongly recommend purchasing additional Viper Channel if you plan to use these slats for chain link with a 2-inch chain link gate There are three diamond patterns on a 3/8-inch square. When it comes to diamond size, the difference between the two parallel wires is decided by the thickness of each wire. From corner to corner, NOT from top to bottom.
This comes with a bottom piece into which the slats fit. In the case of fences bent up at the bottom, we would have difficulty using them.
If there is a slight slope or even a slight rolling slope, slats will perform well. The installation of your chain link depends on how it was done. The easiest way to tell if your diamonds are horizontally stacked is to look at their position. You can use a piece of straight wood or a tape measurer to measure the angles of several diamonds if you run it along the top and bottom corners. You should be able to use slats in your fence if the diamonds are aligned straight up and down. You need to keep in mind that your slats will be aligned with the top and bottom corners of the diamonds on your fence. Whether it will work or not depends on the fence you have. If in doubt, send us a picture.
My locking pieces were 4 feet long (I was unable to lengthen them) and I had to trim a couple of them. Set that has very high durability.
Selected User Reviews For Ridged Slats Slat Depot Single Wall Bottom Locking Privacy Slat for 3', 4', 5', 6', 7' and 8' Chain Link Fence (3ft, Brown)
My experience with this product has been very positive It has been about two months since I installed the slats. I needed clarification from the seller on what gauge my fence is, which is size 8 he was very kind to provide it. In the Q&A section you can see the complete answer It does say to install with a wire gauge up to 12 gauge on the listing, but I had no problem installing them even with that wire gauge. They were even installed on one of the hottest and wettest days of the year in this area. During the growth phase of the bushes I planted, I wanted these to provide some privacy. Our home is on a corner, and I wanted my German Shepherd to have more of a buffer between him and the small children Both of these issues have been solved by this technique. The slats are thin, but they seem to be sturdy, though I will need to update this review after a year or two of use after I see how they hold up to winter weather. As of the time I ordered, Amazon was offering the best price for the slats I was looking for online. I'm pleased with my.
There is a slight incline in the 6' chain link fence I've got. A bend and kink in the mesh is evident. My hands are affected by early arthritis, I am more than 50 years old, and I stand at 5'8". Taking care of this project was a breeze! took me only a couple of hours to cover two sections of fence on the street side (with some help for the guide channel at the bottom) in order to shield an area where our firepit sits. My foot guided the slat through any rough spots and I was able to snap it into the bottom perfectly once I got it started at the top. Stooping or bending is not allowed. There is so much I enjoy about it, I can't wait Although you can still see outward through the slats if you need to, you can't see what's going on behind them from the road. This is exactly what we are trying to achieve. Those colors complement the siding that I have well, because they are sand-beige. I am happy with the purchase. It arrived promptly and was The problem is not my fault.
The slats are used to simulate the look of a metal fence on a chain link I wanted to make a vertical fence but the cost of a metal fence is prohibitive, so I bought some slats. In order to protect my privacy, I did not use them. In the photograph you can see that they fit through the chain link fence very easily, and they are placed around 4" apart. This is a good result for me.
There are some basic privacy benefits to this product and it is very easy to use. The privacy will not be total, but it will be sufficient. If you want more privacy, you'll need plantings, and if you need something with maximum wind flow, get another product. We live in South Florida and therefore needed something with good wind flow. Adding these slats to a chain link fence we replaced a wood option with chain link. Those flowers give the fence a beautiful look!.
The installation took a couple of days (it is hot at the moment), and I had to break it up. The fence on our property is over 40 years old, so it's not even or level, and it's got some wobbly spots. In some areas, I decided to install them with the locking guards mounted at the top - it worked well. Although it is a bit more difficult to weave the slats, they still lock down well. The colors we selected match the trim on our house, and the result looks fantastic! The solution we have chosen is so appropriate that we're installing another 100 feet until we're completely satisfied. Our dogs love the way the fence looks, and we like the look of it too. It isn't a 100% visual block, but it's more than enough to keep our dogs from getting excited when stray dogs come into our yard.
There were about 70 feet of tan slats that we installed. I appreciated how easy it was to install the slats and how well they fit. A view of our neighbor has been blocked by a fence we installed between us and them. A bonus is that it makes for a beautiful looking back-plate As well as landscaping, we receive a drop. We should be able to reduce some of the dirt and weed seeds that wind up on The supplier and product are highly recommended, at least for me. As well as the product, the packaging was excellent.
After you have installed the first slat, you can use the bottom channel to keep the bottom aligned. Installation was easy once you have installed the first slat. It only took me about an hour to install about 15 feet due to the plastic's elasticity. I used a straightedge and marker to make a flat line and then I used sharp garden scissors to cut the top to contour a flat line. For now, it looks good and blocks my dog from easily seeing out to the street. A simple solution that doesn't cost much money.
Despite the fact that my fence is uneven and jagged at the bottom, it was hard to slide the locking channel into. The slats are very easy to install and look great. I didn't use the locking channels because my fence is jagged and uneven at the bottom. Two packets of slats in different colors were enough to let me put two channels behind one another, slide it into the fence, and it would become thicker and less likely to slip I am satisfied with every single thing I do.