Brinly PA-40BH Tow Behind Plug Aerator, 40-Inch
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
On the deck you can fit two standard child seats, if you use the available adapter. Depending on where you live, you may have to strap bricks or rocks in with the babies in order to get the proper weight. The idea is that you need to gain weight like a jockey. There was an annoying crying, but the engine noise drowned it out for the most part.
It pulls the aerator with a Toro riding lawnmower. It would be helpful for me if I could back up at some points in my yard. The only time I have tried this, it didn't work, but it might be due to lack of skill, such as a large truck driver who backs up routinely. Even so, for the average home owner, it is likely to be problematic. Apart from that, I really enjoy the aerator. I have seen a noticeable improvement in my lawn since I started using it.
The answer is yes. The bolts that were missing were also missing from me. I chose the Home Depot because I found it easier to find there. You'll just need to figure out what you're
In short, yes. The deer 105 I use actually fits my needs. On it I placed at least 200 pounds of large water jugs as well. I really like it!
Selected User Reviews For Brinly PA-40BH Tow Behind Plug Aerator, 40-Inch
In any case, it shouldn't be like that. The only expectation I had was to get a good deal. Although some reviews were not so positive, it seemed unlikely that something that was so much cheaper would actually last for a long time. The price was cheaper than renting one locally but, at this price, it was still a better deal to buy this one. My hope was that at least once it would work. As a result, I took the risk. I received the product in a box, and it was difficult to assemble. It came with all the parts, and the instructions were easy to read. While I grunted, was frustrated, and irritated as usual, I did so with the utmost restraint and with the barest of I was able to accomplish it. I feel that "assembling is required" purchases are no better or no worse than any other. That sounded kind of flimsy to me. I then connected the machine to the lawn tractor and started pulling it around the 3 acres of lawn as I weighed it down with three solid concrete blocks. There were no problems with it. Although it poked holes in the earth, Having used it seven times so far, it is now a familiar feeling. Since it hasn't been broken yet, it still pokes holes in the ground. As a result, I have no idea how to grade this. Certainly not an impressive piece of work. I had a difficult time putting it together. In spite of the fact that it looks like it's going to fall apart if I stare at it too long, it It's probably just me being picky, but I'd give it a 4 star rating. I am very pleased with it. It surpassed my expectations in every way. This is by a wide margin! That looks so cheap, though! It may break, but I could get another one like it if it does.
You will likely be in pretty good shape with this if you have a large area with not too many sharp turns, or if the tines and wheels rarely engage or disengage. It is essential to have the proper soil moisture in order to achieve success with an When the weather is too wet, you end up smashing When the air is too dry, it does not penetrate. It will take some experimenting with your lawn to find out what works best for it. Try the day after a great rain, if it's muddy, try the next, etc, so that you can get it to work. There is more effort involved in lifting and lowering the machine when you are in areas requiring lifting. From your mower or tractor you cannot reach a lever to engage/disengage the machine, so you have to stop and get off every time you want to raise or lower it. When you have someone available to do it for you, it's a lot more pleasant, but it's still a hassle. The tractor should have the ability to do this without you getting off of it. There is a small pin on the lever that easily comes loose when going over a bump or something, or sometimes just randomly when you don't want it to, such as when you are attempting to move the machine by hand when it is in storage or out of it. Although the machine is pretty durable, I fell victim to the handle disengaging and it flew forward and nailed me in my face while moving it. My fit of rage caused me to lift the machine to my shoulders and throw it across the yard. As I started throwing the cinder blocks that I'd used to weigh it down, I tossed them at it as well. In addition to breaking it, it scratched and bent it up pretty badly. I used a rubber mallet to pound it back into the general shape that it used to be after I calmed down. Still, nothing broke, so everything continues to work. Therefore, durability isn't as bad as one might think. My house has a lot of open spaces, which make it perfect for this fence. In the near future, I plan on purchasing a manual core aerator to control drainage in smaller areas, instead of dealing with it and the on/off engage/disengage that it would entail.
Aerating my lawn with it is a great experience. My ATV pulled the wheelbarrow behind some top soil bags weighed down with the weight. With my new lawn, I am the greenest person on the block!.
of all, the box had a huge hole in it when it arrived. My aerator arrived about a week after ordering it, so I thought it might have all the pieces still attached. Despite its best efforts, it didn't. As I took inventory of the items that survived the trip, I realized the missing pieces wouldn't be such a concern. Though I didn't have every part I would need to finish the job, I started assembling the equipment anyway. In addition to the assembly being tedious at best, the spoons were hard to work with. I just can't handle those It was a good set of instructions. It took me about an hour to assemble the bulk of it. As soon as the fun began, everyone had a blast. There was a support angle iron fastened on the underside of the unit that I was missing. So I bought some angle iron from Tractor Supply, welded it to the underside, then went back to Tractor Supply for a piece of one inch plate steel. In the following steps, I welded the trailer portion to the angle iron, painted it all, and began building it. The addition of weight has no meaning without added weight. The only concrete blocks I had were 180 pound bags of concrete, which I purchased at a local hardware store. Those fit perfectly in the tray and I plan to leave them there for rain to fall on them and allow them to harden. In any case, they should fit well in the tray, and I do not intend to remove them. I used the concrete bags for the first time today, and it worked perfectly! I pulled 3- and 4-foot long concrete blocks My Honda Rancher 420 towed it around slowly while I plugged in the 4 inch plugs. Unless I had welded it all together when I received all of the parts, I doubt it would have turned out as strong. It's probably impossible for me to find out.