Silhouette Media-Magnet-ADH Adhesive Magnet Paper
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
In fact, you need to print on a different paper first, after which you can adhere it to
Whenever I use a black blade, I do so. You can determine which depth to use by looking at the Sillouette. Three passes are usually sufficient for me, and I lower the blade a little as
The answer is yes! The issue, however, is that it is too weak to hold multiple documents Using a pair of scissors or a cutting machine (but it is not necessary to use a cutting machine) easily cuts the magnet sheets.
As soon as I pulled off the white paper covering, I placed the certificate on top of the black magnet paper. Lay a laminated covering on top of it. * However, the aluminum coating will not stick to the aluminum door if it is an aluminum refrigerator
Selected User Reviews For Silhouette Media-Magnet-ADH Adhesive Magnet Paper
Despite its thinness, the magnet is strong. To pass out at the finish line of a local charity event, I wanted an alternative to buttons. After stumbling upon these, I decided to go with magents since I could easily make all of them myself. Since the magnet is fairly thin, I do not expect it to hold very In spite of that, it does cling to magnetic surfaces quite well. On one side of the sheet is a sticky surface you can stick anything on. Rather than just printing our design, I laminated it, printed it again, and printed it again before cutting it out I thought it would be a bit more complicated than it turned out to be. I was able to stick the magnet to the laminated paper perfectly. Occasionally, I had to make adjustments as I cut because my cutting was not in sync (my fault), but I was able to trim any extra magnet from the card using a regular pair of scissors. The product is great and I recently placed an order for more since we still need a few more for our walk.
My experience with it was a mixed bag of problems I had to replace my printer because it hated I got things printed, but they were smeared, the printer jammed, the cartridges wouldn't move, and, to top it all off, it jammed again when I tried to move them. It barely stuck to anything and barely stuck to itself, even after drying for 24 hours or more! The magnetic quality of the film was poor, as it barely adhered to itself and barely adhered to anything! The fact that I did not purchase it first would have saved me time and hassle. There is something different about this product, and it is AMAZING! It might be worth printing or cutting out your picture, then sticking it to a sheet of this stuff after removing the protective My photos were the size of typewriter paper, so what I did was simply print them on my printer (using regular printer paper or copy paper), adhere them to the magnetic sheet, and cut around the photos and magnetic sheet. This is because the picture was first printed on regular printer paper, then set within a magnetic sheet. They didn't smear, because they were applied AFTERwards. does not cause a jam in your printer due to the fact that it does not put ink into the device. As well, its magnetization has superior 'holding power' than sheets that I had to force through my printer. This is a highly recommended book!.
Using this product to apply cut-outs to our cabin door on the Disney Cruise was unsuccessful due to the magnet's weak bond. I purchased this to apply it to my cutouts, but I could not get it to stick to the cabin door securely. For the magnets that I made from this paper, I had to use magnets other than the ones that came with it. The magnet worked well enough on our steel exterior door to hold the door in place at home. However, since I had bought them for use on the cruise, it did not work.
I found it to be exactly what I needed. This is my Big Shot and this is my Super Shot Put framelits on your page and use them We always have loose thinlits in their envelopes after using them a couple of times as the adhesive ends up not working on the cardboard backing. I ordered this product after seeing my friend mention magnetic paper as a way to keep them in place, and it is NOT paper in any way. There is a much thicker layer. It is about the thickness of three cards. My method was to adhere it to the cardboard backings inside the framelits, and then to fold it over and adhere it to the papers. These thinlits envelopes are recyclable. The cardboard may not seem like that much trouble to remove, but I found that I used much less magnetic paper doing things my way since I could piece together two or three smaller pieces to fill the cardboard. I used just one packet of magnetic paper instead of the three I ordered. I guess I will just have to live with that. You can be sure I'll find use for it in other ways. I heard that you can cover the side of your cabinet or shelving or whatever you want, so you can just keep all your thinlits & die cuts in there. It's all out there in the open, the framelits. Keeping them in the envelopes is also a neat idea, but I prefer keeping them in the envelopes.
As stated in the directions, it is recommended to cut off the magnet and then pair it off with the cardstock When done patiently and with steady hands, this can be tricky. Some of the time it works well, and other times it doesn't work. I am not so sure. In order to achieve this, I have placed the cardstock on the magnet and then cut it, which works only if the blade is set to 10, if I double-cut and if I repeat the cut 3 times. However, even then it's a little challenging to pop the magnets out of the sheet (fewer details work best), but the magnets I get this way are quite beautiful. As I strictly produce decorative magnets from my artwork, it isn't very strong, but for the purpose of creating decorative magnets, it is adequate and my customers are very happy with the magnets they receive.
To date, I've used two sheets of tape to affix them to the walls of my shelving unit so that I can store some of my favorite dies. As for the peeling, it looks like it will work fine if I decide to take it down at a later point. Despite its small size, it is strong enough to hold my dies, which is exactly what I It will be fun to play with the rest of the sheets now. I like this product very much!.
It is not as strong as I expected, although it can serve as a decorative fridge magnet for decorative purposes. If you put the paper on, you will not be able to pull it off since the sticky side is very sticky. A regular pair of scissors is all you need There is no need for an Xacto knife or other fancy tools.
The silhouette looks great with this shirt. It is best to lay the vinyl on the wall first before cutting, unless your hands are steady. This is something I do not have. I love it. The logos I create here will be used for giveaways and marketing by my business.
Related Products For Silhouette Media-Magnet-ADH Adhesive Magnet Paper
