Miraclekoo Crystal UV Resin Clear Hard UV Curing Epoxy Resin Ultraviolet Curing Solar Cure Resin Sunlight Activated Resin for DIY Jewelry Making Casting & Coating,25g
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It gets out of control. If you want more control, you can use Epoxy and let it cure until it reaches the desired consistency.
In other words, is it safe to use for food? I have my doubts. While it's curing, it has a very strong smell. If you touch it for the first time, I recommend washing your hands because there is a residue on it.
Yes and no; either a UV light or direct sunlight (not through windows) are required.
It's something that bothers me as well. Under ultraviolet light, it glows a greenish color (the only resin I've purchased that does this). In my pendants, it also has a tinge to it. I put up photos in the review in the hopes that the company would contact me, but no such luck. I bought a 500 gram bottle and am having a terrible time with tiny bubbles that look like tiny black specs until they are cured. If I were to return to my previous employer, I would rather spend more money on less product than deal with this. Since I switched, I've received a lot of customer complaints. Because I make transparent pendants, it's easy to see the strange tint it has. Perhaps it's the chemical catalyst that allows it to be UV-curable. And also. ALL UV RESIN WILL TURN YELLOW OVER TIME.
Selected User Reviews For Miraclekoo Crystal UV Resin Clear Hard UV Curing Epoxy Resin Ultraviolet Curing Solar Cure Resin Sunlight Activated Resin for DIY Jewelry Making Casting & Coating,25g
I'm not sure what's causing the problem, but I'm hoping to shed some light on it. br>At certain temperatures and when the air is humid, your resin will take longer to cure. It works best with DIRECT UV (get a flashlight or one of those nail curing systems), because sunlight is not 100% direct. You will have overcast and the variables I mentioned before% Furthermore, because the sun is thousands of miles away, the "intensity" isn't particularly high for the resin to "detect" it. br>br>I personally use a "blacklight flashlight" that I purchased on Amazon and that cures in seconds, allowing me to get my crafting done quickly. br>br>For anyone interested, I made a pokemon terrarium out of my resin, which is perfectly stable thanks to the UV resin's quick dry time.
MOST REVIEWS SAY IT'S STICKY, BUT ONLY IF YOU USE THE RIGHT LIGHT AND GIVE IT ENOUGH TIME (5-10 MINUTES). 10 minutes in the UV light, plus an additional ten minutes Make sure your UV LIGHT IS STRONG ENOUGH I would recommend going with one higher than needed and I don't recommend using the sun to cure them and letting them sit outside because it can be super sunny but it doesn't get the amount of UV needed (even if out there all day can still be sticky) but I recommend getting a UV light I got mine for about $20 and I've found the ones that don't have a bottom work best s Hopefully, this information is useful to anyone who is having issues with the product or is interested in learning more about it.
I would not be able to use this product. I've tried a variety of UV resin brands and believe I'll stick with what I'm familiar with for the time being. Regardless of the circumstances, this resin would not cure properly. I use three different UV lights for curing, and no matter how long I left it exposed or which light I used, the resin would not fully cure and would remain sticky. Product that has been returned.
It took me a minute to figure out how to use it because it didn't come with any instructions, but I figured it out and it works great. I even colored it with scrapings from a chalk pastel.
This UV resin is one of my favorites, and it's become a valuable addition to my crafting supplies. It's usually used to finish polymer clay jewelry. filling bezels It performs admirably in both cases. I wouldn't use it in a mold, though. If you do, make sure it's a clear mold. However, because this resin cures so quickly, I've discovered that it can warp. As soon as I've tried it in a mold, I'll let you know. When the first layer was fully cured, it became slightly curved. Following that, any subsequent layers would simply flow beneath the first layer. You've completely messed up the piece. if you understand what I'm saying. If you want to make molds out of resin, here's what you need to know. I don't have the patience to wait for two-part epoxy to cure (does anyone?). ), I'd recommend a clear no-smudge gel polish top coat. Yes, for the sake of your toes. You may add a small amount to the mold (it must still be transparent). cure, then add more, cure, cure, cure, cure, cure, cure, cure, cure, cure, cure maintain your momentum going. It does not warp, at least not for me. But, getting back to this resin, it's fantastic. I require it on a regular basis.
I purchased the UV resin because I had read that it could be baked with polymer clay. (I haven't yet, but fingers crossed, I will soon. ) I bought a low-watt UV bulb with a wavelength of 395 nM, I believe. Curing the half circles takes approximately 30 minutes. After about 20 minutes, I remove them from the mold and place them on wax paper before returning them to the light for another 10 minutes. This appears to be a good fit. The odor is unbearable, but I simply turn on the fans and open the windows to get rid of it. I'm enjoying it so far!.
As far as how it works is concerned, it's pretty much the same as using previous products, it is easy to apply. However, I would prefer it to be a tad smaller, because it has a rather mild odor, even compared to others I have found.
If you want to experiment with UV resin, this book is a must-read. After reading some of the reviews, I was a little worried, but I'm very pleased! Although the surface of the resin remains tacky for a while after it has mostly cured, I've found that leaving your project outside to rest for a day or so afterward, even just inside a north-facing window, helps. It will cure fully hard and smooth if it is placed in front of a window.