GEAR AID Seam Grip WP Waterproof Sealant and Adhesive for Tents and Outdoor Fabric, Clear
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It is important for outdoor equipment to be waterproof (jackets, backpacks, tents, shoes) and The Seam Grip Sealer and the Seam Grip Trimmer both worked for me The fact that I HATE IT WITH A PASSION is no exaggeration! I just can't get it to dry It took months and months for them to get back on track In months long it's still sticky (the company admits it's hard to cure & To speed up the drying process, sprinkle baby powder on it What's with all that baby powder? Wouldn't it be nice if baby powder was all over the place? Whenever it comes into contact with itself on a seam, it sticks & amp sticks There is a sealer that tears off when you try to pull it apart. Sealing seams takes a long time and is tedious As I have been tearing off the sticky Seam Sealer mess, I have lost a lot of time You can get much better products by using When it comes to heavy materials, I prefer Costs only 1/2 as much for double the sealer, dries quickly, stays flexible, is tough, and lasts for two seasons. Seams are protected from damage. Considering that it dries quickly, you need to work quickly to spread it out and smooth it out It will take a couple of weeks for the chemical smell to disappear. The Coghlan's Seam Sealer is a good choice for lighter fabrics such as coats I love this product because it seals my seams, dries in a flash, and is easy to use It would be best to use Beacon Fabri-Seal Nylon Glue when gluing nylon pieces together Taking a test of strength Bonds quickly and adheres to nearly anything This product is permanent, dries clear, and is biodegradable This garment can be easily washed. The super bond and the super bond aren't cheap, but it's worth it Many projects can be completed with only a 4 ounce bottle.
Despite the fact that Seam Grip Sealer does waterproof seams, it never Until it comes off, it is sticky! There appears to be positive feedback for a failing product from a group of people who may be delusional or may be working in its marketing. The pain I feel from having to redo all my hard seam sealing work with a product that dries so there isn't a sticky mess in my packs, stuff sacks, and so forth, is still there. A tent. The products and services I promote are not affiliated with me The advice I would give is to NEVER use it. A product like E6000 is THE answer to waterproofing seams. This lining not only waterproofs seams, but also creates a protective layer that keeps them flexible while protecting them from damage. There is no liner, and it costs half as much as Seam Grip Sealer & In this case, you get twice what you normally would. The best part is that it completely dries in only a few minutes, so you can apply any water proofing products over it with no problem. It is recommended to sprinkle baby powder on the seams after application of Seam Grip Sealer to help the process along. What's up with all the baby powder? ARE YOU SERIOUS? Unless you want to end up with a sticky, useless mess, spray waterproofing on baby powder covered fabrics will not work! One of the advantages of E6000 is that it can be found in any hardware or automotive section of your local department store. It only has two negative aspects the smell of funky chemical molecules takes several weeks to pass, and it takes several weeks for it to disappear completely If you want to smooth it on the seams quickly, work quickly because it dries quickly.
There is no way to change it.
In my opinion, it will safely hold down the outside of a sleeping pad, but I would not use it on any surface that may come into contact with your skin while you sleep on a sleeping pad. A human and other animal can be harmed by it.
Selected User Reviews For GEAR AID Seam Grip WP Waterproof Sealant and Adhesive for Tents and Outdoor Fabric, Clear
In order to give the product a good coating, I have used a brush to work it into the seam threads. There is an unpleasant odor and a rubbery texture to it. I don't find the smell to be pleasant, but it's not so awful that you can't do it indoors (from my perspective). Before using the tent, I cleaned all the seams off with rubbing alcohol as suggested by the instructions. I plan to use it for a weekend in September, so if it rains, I will let you know how it does. In a rough thunderstorm, I got quite a bit of water in my tent during my last camping trip. It seems so many people have commented how difficult it has been to work with this There is no truth to it. Take your time and open a beer, listen to some music and enjoy yourself.
This waterproof, winter material cannot be stitched without ripping it further and making it look horrible (even if it was possible, it would be an unusual color of burgundy/wine so it would be almost impossible to find thread). As I said, the tear is conspicuous to be found right in front and beside the zipper In order to find out what I could discover on Amazon, I went there. I read all the descriptions of all the fabric adhesives and despite looking at them all, I didn't pick any of them. In the related items section, I found this seam sealant and after reading about its "flexible" and "dry clear" properties, I decided to buy it. Using tweezers, I carefully placed each side of the torn piece, butting the edges together, after trimming the edges of the tear. I then applied a small amount of Seam Grip on the fiberfill directly behind the tear and brushed it on. Within minutes, the results were as follows You can get it for under $10 if you want to It still looks like new after I wore it the entire second half of the season last year, even after putting it in the washer. There are a lot of tears, and you have to look carefully to find them. I could not be happier with my purchase! Excellent! I highly recommend it!.
There are a lot of Gear Aid/McNett sealing products to choose from, so it can be somewhat confusing to know what the differences are. However, it can be difficult to apply neatly because it is such a heavy and effectively strong material. There are similarities (and differences) in texture and smell to model glue or a thick general-purpose glue Despite its wide variety of uses, it oozes out nicely and grips seams and fabrics As a result, your seam will be flexible, tough, glossy, somewhat thick, somewhat tacky, and 100% waterproof. Unless you're applying it with a brush, my advice is to not use it You should buy a few bristle brushes to go with that cap thing. There is no need for them to be acid brushes like those provided, but they should be somewhat soft and should not be wider than 3/8" - If you use a cheap artist brush, then that should work fine. You need plenty of them and because they will get ruined when you use them with this stuff, you want them cheap. I would try to squeeze out less than you think you need when applying. The material is thick, however, it can still be brushed fairly softly and it will still flow The final result was good if I brushed it out as thinly as possible while still getting a complete coating. It's important not to put too much down as it becomes bulky and thick, making it hard to fold, etc. So make sure to There is always the option of squeezing a little bit on your brush and adding to what you have already put down, where it is almost as difficult to subtract from it. Therefore, this is very effective stuff, but it's not very visually appealing. After it has dried, it is tacky, and it smells, too. It turned out I had to apply seam tape over it to take away the tacky feeling. Although the results were more expensive and more effort intensive, the results are truly bombproof, durable, and reasonably good looking.
It will be a test of your artistic skills to see how neatly it all fits together. Don't forget to keep a few paper towels on hand! There is a dripping issue with the applicator brush that screws on the tube, and During the time it took to set up, I found that it created drips. Those applying the product to humid climates will find that it sets up faster since the product is moisture cure. As I live in a dry zone, I have found that if I run hot water for a while in the shower after sealing the item, and then place it in the closed bathroom after curing, I get faster cure times from the humidity, and any drips are effectively stopped. It was all set up and ready for the baby powder (simply wiped on with a towel) with the result that it stopped being tacky It may be possible to apply this product to the leaky areas in order to prevent them from leaking. Also, don't use this material in an enclosed space- it contains quite a bit of solvent, which can be hazardous to your organs.
While the product is curing, the item being sealed should be held in its natural position. The product you applied to your project will leave a goopy mess if it touches any other part of the project! You will have to find ways to suspend your item so that other parts won't touch the applied product. I used PVC duffle bags and found that inflated trash bags inside the bags would keep the items in shape until they You may not notice a sharp bend in the fabric when the product is liquid, but if the fabric is left that way, the product will probably retain a sharp bend after it has dried. You will be able to make a successful application if you are creative in how you hang, drape, or suspend it.
Related Products For GEAR AID Seam Grip WP Waterproof Sealant and Adhesive for Tents and Outdoor Fabric, Clear
