Vencetmat Unbleached Acoustic Guitar Nuts, Fit for 43mm Neck Slot, Pure Complete Bone, Bone Original Color, Vintage Style, 4 Pack
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
My guess is that the spacing is exactly 1 3/8" from e center to e center, with a correct proportion.
This paragraph has a length of one. It measures 7 inches thick, and is 0 inches wide. I am 23 inches tall. You will be able to use it with your Gretsch Jim Dandy if the nut slot is those dimensions. The slot may be too small for you to use medium fine sandpaper to sand the nut to the correct thickness or length (as well as the proper To ensure that you achieve a flat surface, you may want to place the sandpaper on your counter or kitchen table and move the nut over the paper. In this case, I installed the nut in a strat replica with a narrower slot, and by sanding this nut to fit, I was able to achieve an excellent fit. In addition, this can be a relatively unpleasant task if you are sensitive to the smell of having your teeth drilled at the dentist, as I am.
Exactly two and 57/64ths of an inch are accounted for in each of the four saddles. It measures about 1/8 inch wide and 1 inch long. All saddles need to be sanded carefully to fit properly. While this is easy, it requires a great deal of time. If you're lucky enough to get it right, it's probably worth the effort!
Selected User Reviews For Vencetmat Unbleached Acoustic Guitar Nuts, Fit for 43mm Neck Slot, Pure Complete Bone, Bone Original Color, Vintage Style, 4 Pack
If there had been a bit more base to crown height, I would have been able to adjust the fit up more easily. In the end, I had more difficulty reducing the length to fit the bridge slot than I did the height of the bridge bone. In the end, I was satisfied with the fitting as the sound reproduction was excellent and I removed the tendency to get buzz from overadjusting I used the original bridge bone blank on my Washburn Parlor guitar, a guitar I really enjoyed. Granted, it has a smaller sound and projection than a standard dreadnought, but plugged in, it is on par with if not better than many offerings from other brands and it is one of my top three used instruments. In order to play my instruments well, the sound reproduction must be accurate.
Potential buyers should consider these points I can't use these on my Yamaha FGX-35 There aren't a lot of ways to fix the 830c, and can't really be modified beyond that. I recommend looking really closely at the measurements you need if you own a Yamaha guitar like mine. The product itself is fine, though* - There is nothing we can do about the saddle as it is too small. There's a *little* shortness along its length, as well as a thinness in its construction. You can handle it if you're in a rush, but it won't fit tightly. Due to the thinness of the saddle, it will sit at an angle in the bridge slot, which may even damage the bridge under tension. If you have fret buzz on your guitar, you may need to adjust the neck/truss rod as well. It seems like the nut is a bit thick, but that could be fixed by However I did not bother with it. Other than that, product appears to be okay. Unfortunately, I can't judge the quality of the video due to my circumstances.
My first impression of these was that they were of really good quality for the price, although one of them came chipped to the point where I probably couldn't used It is one of my major complaints about these, that I wish they were a little taller. The nut cannot just be slipped on. It has to be fitted. Why not make it just a bit taller so that it will work on a wide range of Make sure the nut is perfectly straight before you go down the rabbit hole of mounting it to your guitar. Use a straight edge to check the front side of the nut. You can use a straight edge, then hold it up to a light to see if there are any gaps. . . . assume that the two that are messed up in your batch may just be used to give more donors to the other three?.
In the past few years, I’ve grown very fond of parts made of unbleached bone These are excellent as well! When you shine a light on the bone, you can see right through it, and they are flawless. Besides that, they also have unbleached Bone Bridge pins that I use on everything I own in terms of Acoustics, To fit the pins, most of them need to be sanded a little bit.
It has so far been a good experience. Although I had to sand and make the saddle thicker to fit into the bridge slot snugly, it is identical to the original saddle that came with the Martin Road series GPC-II The eleventh episode. In this case, the neck action appears to be lower, but it isn't fretting up and down. The nickel bronze 12-inch d*addario screws is used The book has 53 pages.
They had to be adjusted a little with a Dremel, but that's to be The quality of these is very high. They are a great company and I recommend them to any one. Moreover, the nut has a smooth curve with a solid break at the fret board. Likewise, the bridge has a very well designed offset for the "B" string (which ensures good intonation all the way up the guitar's neck).
Reviews are normally not written by me. In spite of that, I felt it was my responsibility to do so The plastic looked like bone to me when I expected it to be plastic. I like how they look aged and seem to be just the right height, but I tweaked the length a bit so they look just right.
Four roughed-in pure bone nuts for a Gibson at two bucks each? Thanks very much. I would like two packs. This is an excellent product. Pre-cut is good, and sounds great once it is So YMMV. You will need to finish a little to make it look good.
Related Products For Vencetmat Unbleached Acoustic Guitar Nuts, Fit for 43mm Neck Slot, Pure Complete Bone, Bone Original Color, Vintage Style, 4 Pack
