1 X Glass Hydrometer Test Jar
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
There are 12 days in a month Three quarters of an inch deep by one inch wide The diameter of the hole is 1/8". A measurement taken from the inside. So far, I have not broken one, but the jars are thinner than the ones in labs.
The amount would be about 7 fluid ounces, if I did my math right.
Selected User Reviews For 1 X Glass Hydrometer Test Jar
I broke it the first time I used it without rolling over or being struck. In the past, I have had others break too easily, so I usually just buy The glass breaks at the base because it has a sharp 90 degree angle at the bottom and is paper thin. The following just came to my attention The Measuring Cylinder comes with a brush and a 100ml graduated cylinder for measuring. The piece measures 2 x 1 x 100ml. The Ronyes Lifescience Company. A tapered bottom with a thick and nice glass that does not break off easily.
In a nutshell There is a very thin bottom on these and they will break very easily with just a tap of the In mine, I filled a sample from the primary with a hydrometer, dropped it in, and filled it up again yesterday We are almost done with this brew went straight to the bottom, and suddenly beer poured (!, the floating!, The floating! The hydrometer was sinking and tapping the bottom When I had cleaned everything up and looked at the bottom, I noticed that it was extremely.
Alcohol percentages can be tested perfectly using this method. As it's tall, the hydrometer fits in easily and it is thin enough to permit you to test without having to put much alcohol in it, as you would if you used a bottle. Drop the hydrometer into the jar only after it has been checked! I have read comments looking at the jar that said it broke when a hydrometer was dropped In any case, that's not how to test properly. Lower the hydrometer into the jar of alcohol and gently press it down to a certain level before releasing. The floating section is going to return to its proper measurement when it floats up again. You can insert a hydrometer into an empty jar by holding the jar sideways and inserting the hydrometer until it touches the bottom. Then, you can turn the jar rightside up to consume the liquid.
There is an issue with the tube fitting properly in the base. Even if the thing you are measuring is important enough that you are measuring it, chances are good that you will not want to have to clean it up once it Please avoid buying unless you only wish to purchase the glass tube for the item.
It only takes a little tap of the rim to start a crack, and the crack eventually fails. Although the price is right I don't think I can live with the plastic base it's very wobbly, making it impossible to get a clean read on a flat surface without shaking the tube around I'm going to replace this with something else.
I will want to add a rubber protection on the next one, or maybe a piece of plastic, to prevent it from breaking because it is so thin.
I was using an old plastic hydrometer jar that became hazy & it required cleaning Water meter has been scratched, making it difficult for you to read. There is a solution to the problem with this product! Keep it safe by being cautious.