SKEMIX Finger Ring Cutter Tool - Jewelers Emergency Worker
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Since it did not come with instructions, here are a few tips to get you started 2. *br. Be careful that the blade does not get out of alignment with the curved track (there is a little 'play' and they could get offset, which could bind the It is recommended to use moderate pressure on the thumb handle to hold the two halves together. With pliers, you would slice it in two you would not do it with a knife. To turn the blade forward, you must The teeth are canted away from the handle as on a regular saw blade, just like the teeth of a pen If you want them to be cut at an angle, you should do so. The saw teeth must be oriented in the right direction before using. I had to unscrew the blade and turn the saw in reverse, so the teeth canted in the correct direction. can take a few minutes to look through a ring (even gold). Take your time and align the two halves as you work
The lever was held in place by my daughter while I turned the wheel. Occasionally, it would clamp down when I was using too much force, so I had to line it up again and get it right the second time. I had to mess with the settings a few times, but after a few minutes it worked. Thank you for taking the time to read that.
It was a terrible experience to use this ring cutter. It was not able to be used. There was a problem with the cutter. The knob fell off at the first attempt. Since the threads of the knob did not match the threads of the nut, that was impossible to fix. Trying to turn it wrong, I couldn't get it to work. review, I commented that this tool should not have been on the market in the first place. My lemon is a lemon of my own, as other people were able to make use of They have bad quality control, so they're not good at it. This item is really cheap, as I know. Yet, if it works, then there is no point in spending more. Anyhow, if it works, which I have a lot of doubts about, then yes you can use it at home without This may be of help to you.
Stainless steel cuts gold like butter, but gold is 100 times stronger than stainless steel. It is not something I would try. It is possible that a jeweler has an electric one capable of doing this. I do not think that this tool has the power to cut stainless steel. You have to turn the wheel and press down on the wheel at the same time. My guess is that it is stainless steel since it has a cutting part made from it. It would not cost you much to go to a jeweler.
Selected User Reviews For SKEMIX Finger Ring Cutter Tool - Jewelers Emergency Worker
I loved how well this ring cutter worked! We didn't want the marriage to end because the wife didn't want it to end. As a result, I was able to convince her we would add another anniversary wedding band if we were successful in getting her ring off! ha ha ha
I tried liquid soap, dental floss, fishing line, butter, and ice water without success. Within a few moments, this ring cutter was able to cut through the ring for over 50 turns and 3-15 year anniversary band for under 30 turns. This is an excellent purchase. Thank you!.
A second spot in the band was so easy to cut. I stretched the ring out a little and it came off effortlessly. I think the tool would turn out to be able to cut metal forever! The product I purchased was exactly what I needed. Considering jewelers no longer cut off tons and want you to go to the hospital, I'm glad to have the option to do it myself at home and without having to go to the jeweler. You don't want to make your way to the ER because you're too fat for your wedding ring, right? It's a lifesaver! The price is definitely worth it! It does not come with any directions, but you can figure it out on your own. Turn the "key" away from you to turn the wheel to make the cut with the lower curved metal piece under your ring. Put the lower curved metal piece under your ring to protect your finger, lower the wheel and keep your thumb on the wheel. This is easy!.
I wanted to replace my thin gold wedding band with a newer one but after 25 years of wearing it I was still It has been tried before, but I have not had luck with string tricks, soap, etc. Considering the excellent reviews I have read, I bought this tool with high hopes. Unfortunately, when I took the plastic bag out of the package, and there were no directions, the blade and the screw handle fell out. I couldn't get the thing to stay together when I tried to put it back As soon as I tried to use it, even if I managed to get it together for a minute, it fell apart again. Now, I must admit that the couple of times I did get it to stay together for a minute, it did make marks into the gold so I doubt that it would work if such a thin metal. When I used this, my finger was swollen and I searched on YouTube for a video showing a man cutting off a ring with a side cutter (type of pliers) and a nail clipper's flat, metal part. thought what the heck, I'll give it a shot. Here's something you should know The process took less than a minute to complete. You could save yourself some time and effort by doing a search on the web.
A gold band somehow got stuck on a pinky finger during the hot summer days, and I couldn't figure out how to remove it despite trying every trick I could find. My ring had become so uncomfortable that I went to a jewelry store to see if they could cut it off for me, but they declined, presumably because of the liability problem. As I made this order on Amazon, it was a last resort, as I wasn't certain if it would work and I was afraid I might end up cutting myself. I was able to get it done on the first try because my husband did the cutting for me. It's so great to be relieved! The situation is never one I'd wish to repeat, but I'm glad to know there's this tool nearby if I ever find myself in it.
To remove my wedding ring that had become stuck, I got this tool, otherwise I would have had to call This product arrived on time with Prime shipping, but it appears to be made very cheaply. There is a wobble in the blade and the groove does not stay lined up with the The process of cutting through a very thin gold band took some time, leaving lots of metal shavings and shards all over the place. It will be necessary to sharpen this rotating blade more than once to get more than one use out As a whole The method works, as long as you don't require it more than once or you have sharpening tools and the ability.
I tried everything to remove them, but could not make them come Prior to going to the hospital, I had one last resort a ring cutter. This was definitely a great purchase for me, but I'd advise you to hire two people to do the job. You do not get instructions with this ring cutter, but it is very easy to use and figure out. If you cannot figure it out, you can look up videos online since it is just a regular It was able to cut through rings of different thicknesses with this ring cutter.
As soon as I got my tragus ear piercing done, it got stuck and wouldn't come off no matter how I twisted/turned it or pull Nursing is my profession and I have used ring cutters in the hospital before, so I thought, hey, maybe it will work for my earring as well! As with the one we use in the hospital setting, this was super easy to use and also very effective! Only took a few minutes for it to cut through my stainless steel 16G earring! Thank you for taking the time to read it! It's just perfect for cutting rings.
nearing the moment when we would go to the jeweler to have a ring sized. As a result of reading the reviews, I decided it might be worthwhile to try a ring cutter. It will surely work, but the efforts will be quite a bit more than I expected. I was wrong as hell. The entire process took less than one minute, and no instructions were required. This cutter was a perfect fit for the ring, even though it was a small band ladies ring.