XYZ 3 Axis Manual Linear Stage 60x60mm Trimming Bearing Tuning Platform Sliding Table

The following measurements and observations are also included. Micropositioning stuff in three dimensions worked great for me when I needed it for microscopy work. Make sure the platform is of a proper size and can be adjusted because for most uses it will It doesn't give you as much detail as you would like and there are no drawings or instructions, so if you want to do it, you'll need to know what you're If you want to turn the dials, you may want to loosen all three nuts. Both the top and bottom plates are 60 x 60 x 6 mm (It is about 2 and 3/8 inches square for those of you that aren't used to The top of the product features nine 4mm screws that can be used to attach the item. A small amount of space is left around the screw holes so they are centered off of the plate edge. Four by four plates are on the bottom. The smallest diameter is 45mm A hole centering at 5mm off the edge of the platform to accept a socket of 4mm Usually, head screws are used. If you want to access these holes, you will need to move the x-axis Feed the screw all the way in one direction, install the first two screws, then feed the screw all the way in the opposite direction to install the last two screws. We hope you find this useful. Furthermore, if you need a leveling function you can create a micro leveling plate similar to a 3-hole micro leveling plate at the top by using the holes in the top. Since 6 of the threaded holes are accessible from underneath, the printer can be used as a stand for measuring You can get knurled 4 mm screws and install them from underneath the top, and they will become micro levelers (there is more to it if you want springs, etc, but if you are concerned about this sort of thing, then you get the idea).

Maximo Bond

| Jan 11, 2021

As other reviewers noted, this thing is small and has a maximum travel distance of about 6 cm. If you want to capture multiple 1mm x 2mm sections of a 20mm diameter sample via high magnification photography, this tool is great for moving from one site to the next in a careful and controlled way. I found this tool to be a good tool for my work and at a very reasonable price. I can also imagine it being used for very fine, small-piece.

Riley Fernandez

| Feb 18, 2021

It does not come with accessories such as hex screws or tool bar holders, and it can only be used to make very precise cuts.

Boden Garner

| Jan 27, 2021

The screw size information was not included on the product when it was initially delivered to me. I was frustrated by this. When contacted by the company, however, they provided the correct information, and they have since updated their descriptions to reflect this.

Ramona Carson

| Apr 27, 2021