Powerbuilt 620470 Unijack - 4000 lb. Capacity
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
I like it very much, it will do well with 2016 HTV
In order to reach the 6000, 11 people are needed. For access to the lifting point, there must be at least 25 inches of clearance. My guess is that your Jeep Wrangler Sahara has that clearance, but you should measure to ensure that you do. In case you were wondering, the 6,000 has a lifting height of The period from 25 to 17 is described. It is 5 inches long.
This jack has a height range of 11" to 21" and we don't know whether it can fit inside of your mower since we don't know what is the ground clearance, but as far as we understand, most mowers have a low ground clearance. I would appreciate it if you checked to see if your mower would fit. My sincere thanks
Selected User Reviews For Powerbuilt 620470 Unijack - 4000 lb. Capacity
As a replacement for the bottle jack that came with my small SUV, I purchased this jack. Since it has a wide base and a locking jack stand, I thought that it would be safer. However, I got a flat in Florida while driving through alligator alley. The directions told me how to lift the SUV. When I was finished changing the tire, I disengaged the lock and lowered the jack using the hydraulic release. The entire apparatus was stuck in the locked position due to oil leaks under the jack Still elevated, with the vehicle on the ground. As a result of keeping the original bottle jack in the vehicle, I was able to salvage the Unijack from beneath the vehicle using it as a rescue tool. This return window is now closed and I have to deal with this Purchase this item at your own risk. If you really want to use a bottle jack, you should buy one. In spite of this advice, make sure you test it at least once the day you get it in your driveway. On an isolated road, when the temperature is 90 degrees Fahrenheit, you don't want it to fail The temperatures were over 100 degrees, and your family was.
A used and defective jack appears to have been delivered to me. There is a very good chance that they are getting a lot of returns and trying to resell them. Due to safety concerns, I would advise anyone not to buy this because you may likely be getting a used product. I was unable to move the jack stand part of my unit with the pin out because it was frozen. This would result in the box not going down when lifted. In the end I had to apply a lot of pressure to get it to go down. My applying pressure took some paint off the side of the jack stand part because it will not move freely. I noticed then that the jack stand part appears to be fused or stuck. Nevertheless, I had to do that to put it back in the box after returning I would say that this is a very dangerous item and that Amazon should be notified about it.
Do not buy this product. I bought the product on May 5th, but have not opened the package until now on June 16th. This is primarily due to the safety lock switch not being able to lock properly and the jack becoming stuck in the extended position and refusing to retract. I raised it for the very first time and it froze. The store told me that my return window had closed last week, so I was unable to return this trash for about 80 bucks. There's no doubt I got ripped off. Taking it out of the box was the first thing I did. The issue has been raised.
Due to the design and construction, as you can see in the photos, the post of the hydraulic piston and its hydraulic cylinder do tilt to the left while lifting. If the saddle is raised, the vehicle is no longer sitting on top of the part tying the piston to the stand. There's slop and play, and comparing the 4 jacks, each is welded together differently at different angles, as can be seen in the photos. During lifting, I also found a disturbing amount of flex in the legs of the base and jack stand. There is a screw on either side of the base, and another one on the top of the piston, which holds the hydraulic jack in place. Since the jack and jack stand have a misaligned angle, there must be a slight looseness in the screws in order to allow the piston to retract as smoothly as possible. Among the 10 seats of my compact SUV, there are Under each lift point, there should be a clearance of 5". My front wheel could only be lifted 1/4" off the ground at full extension, and the back wheel could not be lifted at all on a flat concrete floor. Even though I could drive the vehicle onto ramps and blocks so it could work, I did not feel confident about the jacks themselves. As a result of measuring one of the jacks' height, I can provide you with links to pictures. The measurements vary from unit to unit due to individual variations in construction. The Jack height settings (7 positions) are Approximately 5/8" by 9" Three eighths inch by tenth inch Approximately 1 1/4" and 11 1/4" One eighth of an inch, The 7/8-inch and the 12-inch A 1/2", a 13" 3/8" in diameter. In order to engage the jack stand lock, adjust the height at the following A 1/8" or a 1" A 1-inch, two 2-inch, and three 3-inch drill bit Suitable for 1/2 inch, 4" 1 5/8" long. It's possible to raise the piston another 5/8" beyond the highest locked height, for a total stroke of 5" A quarter inch. 3/ 8'"), it can be raised to 13-17" Seventy-eighths of an inch, and 13 inches The lock is engaged on 1/4". **When set to 13 or more The raise can be adjusted from 18 mm to 3/8" A lock is engaged when the lock is 5/8" and 18".
This is what I keep in my truck in case of an emergency. Changing the tires of this truck is easy with this machine since it can lift very high. The jack is placed under the frame of a car while I lift the front tire. It is necessary to place the jack under the axle in order to jack up the rear tire. As well as the 6000 lb jacks, I have two of them. pounds of jacks work well when my vehicle is parked on concrete that is level. It often happens that when I park on gravel, the 6000 pound jacks are too tall to fit underneath the frame of the truck when I am on an unlevel area. Whenever I need to do brake jobs or rotate tires, I use the 6000 pounds of jacks. It is better to have the 4000 pound jack on hand in case of an emergency.