Rectorseal 97637 Safe-T-Switch Ss2
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
If you want to connect it to Y or R, you can do so. The blower fan will continue to run if connected to Y, but the outdoor condenser will be turned off. In short, if connected to R, it will shut everything down, including the thermostat (unless it's battery-operated). In my case, I usually connect it to R so that the thermostat displays a blank screen if the system is down
The doors are normally closed, but they open with water issues.
An example of a float switch is shown here. In the case of accumulating water, the float causes the switch contact to open, cutting off the electrical Low voltage and low amps are typical in most hv/ac control circuits, so the switch contacts are suitable for most applications. Neither of these devices would be able to interrupt a water pump through holding the power. The sump pump helps remove water from a basement. As even as possible. If you are 25, you must. The motor has 50 horsepower. In order to accomplish this correctly, you must run the power to the pump motor through an appropriately sized control device / relay and this float device would manage the control circuit to the control device.
There is no way to adjust it, according to me. Besides for the fact that it is a safety switch (to turn off the AC unit), it does not need to be adjusted.
Selected User Reviews For Rectorseal 97637 Safe-T-Switch Ss2
I had a failing piping system which did not have a kill switch running when my new AC unit/furnace was Installation was smooth and the software works perfectly. It's now possible for me to clean my system so I won't experience a back up or overflow in the drip pans. Thanks to my quick response, I caught it before any serious damage could occur. The best money I have ever I would love another to install in my rental property. It is important to note that the AC unit will run continuously for more than 20 to 30 seconds before it shuts You should replace your Vivnt thermostat if you have one Once the switch is disconnected you need to turn off your system and kick it back on in order to reset the float.
If your secondary outlet valve is located on the side of the house like mine, you may need to purchase 3/4" fittings to install it. You may be able to install this right into your unit without any additional parts if you are lucky. I watched YouTube installation videos and made one contact with Rectorseal's tech department and was up and running in no time. The electrical hookup took some time to figure out but all one needs to do is find the red thermostat wires coming into and out of your home's HVAC unit.
During the process of selling my condominium, the inspector pointed out that there was no switch on the HVAC system. Because I had some experience with pvc plumbing and HVAC electrical, this was added to the project in a few hours to pass the When tested, the switch worked to shut off the system with sufficient length of wire. In case you lack experience dealing with HVAC, electrical, or plumbing issues, I would not recommend installing this. You can kill yourself if you don't know what you're doing with HVAC systems due to their high amperage.
However, I encountered trouble attempting to use this product after purchasing it and receiving it in good time. An AC technician came out to check it and said that it was the The reason I believed him is because he explained to me how the float was supposed to work and showed me how it did not work. In the end, I chose a refund as the replacement didn't come through.
The overflow plug was removed, and this plug was screwed in. After gluing the unit on the plug, I secured the unit. First glue it instead of screwing it into the drain because there may not be enough space for it. You can get small cans of primer and glue for a very low price at your local builder's supply store. You don't need any special skills to connect an electric circuit if you are If you don't know to distinguish between the thermostat wire and the wire that connects to the outside unit, you will need to do a bit of research. When making the connection inside the unit, follow the wire through a hole already present (I used the hole where the thermostat wire is inserted). A rag was inserted in the drain and water was poured into the drain pan to test the unit. The outside unit turned off before the drain pan spilled onto the floor as soon as water filled it up.
Particularly since the price difference is so large. According to the A/C service man, the condensate float switch, among other problems he found, was not working. He said he had a replacement but he charged $75 for it. However, they can be found on the web for less money. It was very easy to buy this one on Amazon I am very happy with it. Particularly since the price difference is so large. A Rectorseal device was used directly to replace the faulty In just a few minutes, it was inserted into the New housing does not need to be swapped out for the old one. As I cleaned, I - Having done the wiring, the safety switches were tested and confirmed to be functioning (first and second switches). If you are thinking about installing this condensate safety switch, I recommend it as a replacement.
In order to replace the float switch portion of the other style of float switch, I got this. As I looked at it and realized my system had a pipe, I decided to remove it and just screw it into the air handler where it's a designed fixture to go. A switch of one kind for my unit was replaced with one of another, and it works perfectly now. As for the removable portion, yes, it fits the body of the SS1 switch.
I was able to use the float switch as planned. It would have been better to have better documentation provided, but there are plenty of YouTube videos on how to install this specific switch that make it not so hard to figure out. In addition, I'm not sure if the threaded piece is supposed to be glued to the actual switch elbow or not. The drip tray may leak into it if you just slide it on, which is exactly what this item is designed to prevent. The seal on the neck seems to be fine after some Teflon tape was applied. I'm satisfied with my purchase by any means.
Related Products For Rectorseal 97637 Safe-T-Switch Ss2
