Kreg SML-C250B-250 Blue-Kote Weather Resistant Pocket Hole Screws - 2 1/2", 8 Coarse, Washer Head, 250 count
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
As Gary mentioned, I don't bother having coated screws vs. uncoated screws on projects, so I exclusively use coated screws. The majority of my projects are outdoor projects, so I frequently need coated screws when using 2x lumber, but even when building shelving at home or in the workshop, I use the coated 2 1/2" screws. It is the Kreg pocket hole system that is to be used!
No blood appears to be flowing from the wound. Some rumors claim that the blue coating can scrape off when it is hammered or screwed past a tight fit, which might account for the rumors. There is a blue streak left behind that cannot be removed Some people might think the blue just comes out with time if they saw this after the fact.
When my 2x4 balusters needed to be replaced, I replaced them as follows The Kreg Mini Jig and Kreg SML-38 are a pair of tools I bought It's a C250B Featuring a stepped drill, collar, and tool for just $20, the Kreg Mini is a great deal. To be able to use the Kreg Mini, you need to have one When you hold the jig back from the edge 1, you will need to use 1/2 thick material (2x4 and 2x6). There are 1 1/4 inches between the 2 sides. It is recommended that the collar depth be set at 4" To use blue 2, you need to cut the 1/2 in half Screws that are 1/2 inch in diameter. There are no problems so far with the #8 coarse. The ones I've tried so far haven't split and have held fine. *br>Alternatively, you can use the SML-TKF and purchase the Kreg KJHD Jig HD. It's a C250B
It is possible to use the square bit that came with your Kreg Jig for these screws. The Kreg Tech Support Team thanks you for your business, Billy H
Selected User Reviews For Kreg SML-C250B-250 Blue-Kote Weather Resistant Pocket Hole Screws - 2 1/2", 8 Coarse, Washer Head, 250 count
They turned out to be a fantastic tool for building raised beds. In order to finish the side boards without gaps, I joined the two together. I was also able to attach the braces for the lower tier to the side wall without having to awkwardly screw them in free hand. It fastened right where I wanted it. It doesn't get any better than this.
This was a good product overall. I bought a box of 250 since I knew they would last me a long time and that the larger quantity would be more cost-effective. Although others have reported that the heads have been ripped off of the rods, I haven't experienced any problems, and I don't use them to their intended purpose. Over 100 of these have been used, but maybe only a dozen were used to fill actual pockets. From hanging shop cabinets to an IKEA bracket for a floating 72" shelf, the other wall plates have seen action. There are no issues at all. Due to their large flanges designed for pocket hole installations, I find them very suitable for mounting. By having a larger surface area, this will help to ease the pressure of mounting the item and eliminate the possibility of the screw sinking deep into the materials. The 1 tool holder has been used to make a number of tool holders for my welding shop. A flat bar measuring 5 inches by 3/16 in diameter. This flat bar has solid rod welded to it so that I can attach my hammers and clamps to it easily. This set of screws was used to screw the flat bars into the 2x4s so that the tool holders could be mounted. As a result, I had no issue with the head being sheared by my Milwaukee impact. As for the final score of four stars, I gave it to the screw due to its small major diameter. It is true, however, that I am not using them as they were intended, and in a normal pocket hole application, a diameter greater than that will probably be sufficient. However, a larger diameter would make it more useful not only in pocket holes, but also in other applications. Our work as builders/makers often involves the use of products in ways they weren't designed or intended to accomplish. By enlarging the diameter, I could use these products in more applications and therefore would be more likely to buy more of them. It would be a win/win situation for both me and.
The Kreg Jig I have has been with me for about six years. I have used these bluekote screws on several projects over the years and have always been satisfied with their performance. My garden bed with the latest box was built a couple of weeks ago, and it seems the quality is lower than past supplies. Six screws snapped off in a single project (about 110 screws) The coating also seemed to have caused a few bits to move out of place because the bit couldn't fit inside the head of the screw. This is only a small percentage of the screws I used, but it is greater than other purchases in the past. Still, I'm going to buy them and I recommend you do the same. You can buy in bulk, but you should purchase in.
This is a very difficult driver to drive. Those square head driver holes are almost We have a big problem with slippage. You may have a difficult time driving screws into soft wood, if the pocket hole is accessible dead straight on. It has been a failure with both kreg and milwaukee driver bits. The bits I used were of two different lengths. PER HOLE, I had to deal with these screws. When I began working on pocket hole projects, I used T20 head pocket hole screws from a competitor screw company without a problem. Kreg screws are never going to be sold to me The reason I gave them 2 stars was because I was able to put them into use in boxes where I could directly access the pocket hole with time-consuming effort. To be fair to them, I am willing to give them a little When I made my first pocket hole projects, I used T20 pocket hole screws from Milescraft and they worked well.
I don't know if they stopped selling them, but I remember they did sell them once, before the combo screws were invented. In the case of hardwood, the new combo screw slipped constantly and rounded the bit, if not rendering it ineffective Then Kreg pretty much said that I needed to get a new bit to do it That being said, I recently bought more of the blue kote and am very pleased with how it works. When you have a lot of work on your plate, you'll go through these boxes very quickly, so grab the bigger box if you're working on a lot. This screw is some of the strongest you can use to join 2x4's because it has pocket bolts attached to it. But you can also use it to join anything without a pocket bolt. It is much easier to drill with the sharp tip and to torque with the square head, especially with materials such as wood that are harder.
Making them look cool is key to making them work. This was done with my handy dandy Kreg Jig tool. It took just a few minutes to sink the screws into the joint, leaving it There is no reason why you can't get a box of 250 screws for a whole lot less than this case of 250 screws. If you only need the number for a few small projects, you wouldn't have to spend too much.
I find it difficult to review screws. I've got a screw, as you know. This is a screw you use to attach items. The pan head of this screw allows it to screw into holes made by Kreg pocket screw drill bits without ripping them out. This tool is ideal for working with larger wood, I used it to build basic but functional legs to raise my bed several As far as screws go, I'm not sure what else to say, except to say that they are quite expensive for what they are.
It has the same result with both sizes of Kreg screws that I have reviewed. These have a weather resistant coating, and that is the only difference. Neither of these features have been tested by me. This screw was purchased because the price with the coating is almost the same as the standard Kreg screw, and I don't like to keep track of so many different screws. The two purposes will be served by the same product. With my Kreg Jig I have used these screws with good outcomes. When I drive carelessly at top speeds, they have come out of the wood when stripped out of the wood. The screws I have used are mainly for pine, poplar, and birch, so I cannot comment on other woods like oak. They cost less if purchased in bulk, so you can purchase more when you need them. I find that they are perfect for my purposes. It would be a good idea to use.
Related Products For Kreg SML-C250B-250 Blue-Kote Weather Resistant Pocket Hole Screws - 2 1/2", 8 Coarse, Washer Head, 250 count
