uxcell 10Pcs Vertical Toroid Magnetic Inductor Monolayer Wire Wind Wound 1mH 10A Inductance Coil

uxcell 10Pcs Vertical Toroid Magnetic Inductor Monolayer Wire Wind Wound 1mH 10A Inductance Coil

$ 20.39

Score By Feature

Based on 11 ratings

Packaging

6.66

Delivery

6.63

Satisfaction

6.93

Giftable

6.88

OveReview Final Score

How Our Score Is Calculated

Product Description

The inductance range is wide, the current is high and the magnetic leakage is low.

A leaded inductor with the lowest resistance and highest reliability.

The following type of inductor is available Polyolefin shrinking tubing leads, axial leads, and radial leads.

This item has an inductance capacity of 1 mH it has a rated current of 10 A its internal diameter is This is a 5mm / 0mm gauge. A diameter of 1.45" is required for the wire. The thickness of the 8mm is 0.0. This is "07"

This package contains 0Pcs of a coil and has an overall measurement of 10 inches. It measures 8mm x 26mm or 0.025 inch. It measures 43 inches by one inch. The TZ02"

Selected User Reviews For uxcell 10Pcs Vertical Toroid Magnetic Inductor Monolayer Wire Wind Wound 1mH 10A Inductance Coil

It doesn't make sense to use this inductor

3/5

No damaged cores on the inductor. It arrived on time. It is strange, however, how the inductor is constructed. This core is made of ferrite which has a very hard saturation but has a high permeability. In this way, it can produce around 1mH of inductance with 12 turns of wire. In one unit, I measured zero. So far, it is 9mH, which is pretty good. In contrast, the coil is saturable only at It means the inductance drops to almost zero when the core, which is extremely hard to achieve. As soon as the coil reaches 150mA, the coil ceases to function. Put a 16AWG wire in it and call it a 10A inductor, and the coil is a useless device. It is not recommended to use this coil on a voltage converter as it will cause the converter chip to have a short and Therefore, one needs to specify 1mH 150mA, not 1mH 10A, in the coil description.

Bo Giles

| Sep 21, 2020

The old school stereo system parts on this website will come in handy for me! You get your stuff way before you even realize that it's there because it's so cheap and there's so much of it

5/5

I am thinking of building some old school amps for some old Mustang GTs I own from the 80s and am also looking for some good super capacitors for my amplifier as well as any other parts I might We might have it in your hands. I just wanted to thank you again for your quick delivery and It will be great to see you again! This is Jack.

Nicole Andersen

| Aug 28, 2020

Low frequency operation makes it an ideal choice

5/5

It is not recommended for use with high frequency operations One kHz.

Brody Combs

| Oct 29, 2020

With rated current, the inductance is much lower

3/5

There is significant saturation in the core A 1mH resistance was measured at really low currents, but about a 1uH resistance at ten times the current.