CG Solid State Relay SSR-25DA DC to AC Input 3-32VDC To Output 24-480VAC 25A Single Phase Plastic Cover
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The relay is not compatible with this system. The input voltage is VDC and the output voltage is VAC. The first is direct current, like from a battery, and the second is alternating current, like from a
I am happy to answer your questionYes, it can.
LEDs have a forward voltage of 1 when they emit IR light. A forward current of 20 mA at 2 volts. The drive current is typically within a gate's drive range. The LED should be bright enough to trigger the SSR at a low current as it should only need around 10 mA.
The triac only controls the AC, not any other appliances. Unlike other electronic devices, it turns off at zero crossing therefore, if it could turn on at 12V, it would stay on.
Selected User Reviews For CG Solid State Relay SSR-25DA DC to AC Input 3-32VDC To Output 24-480VAC 25A Single Phase Plastic Cover
During the last several weeks I experienced issues that I thought were related to bad wiring downstream, but it turned out this relay had died, and had a voltage drop of 80Vac across the terminals during operation! This is rubbish.
The relay was intended to be used to turn on an outdoor light when the landscape lights are There is a problem with the landscape lights because the differential is 12V but the common leg is -12V There are 6v in the negative leg and 6v in the positive leg. When this relay was on, the indicator light would work, but when it was off, it wouldn't Using a 9v battery, I tested the relay and it worked just fine.
In my case, I need to switch a 11A load, and figured that the 80A model could draw as much as 16A even at 20% (since there is a transformer in my load). In spite of only using this for 5 hours per day, this thing lasted for 10 days in total. If you only need about 10% of the rated capacity, don't waste your time and money on this.
The product appears to be Used to control the heater on the bed of a 3D printer. Switching on and off the power frequently is the result. No clicks or noises are apparent. No noticeable heat is seen (a 10A relay is operating on a 25A supply).
Additionally, I have tried to contact the seller with no success, but the product did not work out of the box. My return window had closed, so I was unable to return.
Furthermore, it would have been more professional if there had been a response. This is not a recommended course of action!.
It works really well!.
One of the electronic devices I had to replace was of poor quality. This new one is far better. I have found the part to be of standard size and is the best one I have seen.
I used this to print 3D models on my 3D printer and it worked great. I upgraded my heater bed with a new one using this product. As a result, my bed already heats up to 60 degrees by the time my printer is calibrated.