Hilitchi KSD301 20Pcs NO and NC Thermostat Temperature Thermal Control Switch Auto Reset 40C to 135C Thermal Control Switch Assortment Kit with Bimetal Disc. for Household Electric Appliances
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The device should be able to work with either DC or AC voltage and current, within specified limits. You may need to add contact protection components such as an inductor or capacitor if you will be using this or any other contact to control inductive, capacitive, or incandescent loads The diode is connected across the coil of a DC motor
In order to protect the contacts, an aluminum cover is used. The air tightness of the container is questionable to me. When a contact is opened or closed, it creates a spark.
These are 10 amps, 250 volts, and rated for some use
On the label it says this, as you can see in the picture. The label also says that the trip temperature should be 15 C higher than the rated temperature, but best I can tell the reset temperature is 15 C lower. Set your temp to +/- 3 degrees C and your restart temp to +/- 5 degrees C There is a 5 deg. C temperature.
Selected User Reviews For Hilitchi KSD301 20Pcs NO and NC Thermostat Temperature Thermal Control Switch Auto Reset 40C to 135C Thermal Control Switch Assortment Kit with Bimetal Disc. for Household Electric Appliances
An appliance repair technician came to my rescue when a gas furnace kept cutting out and only occasionally working. Considering the temperature of the sensor, I suspected the Hi Temp safety switch. One of these could replace the other, and it did, and it works perfectly. For the Normally Closed, I used the 95C. The water temperature should not exceed the boiling point of the heat exchanger. However, make sure your own conditions are met if solder or any other low temp materials should be utilized.
In a custom cooling fan design for a PS4, only a single switch was used. Despite steady use for over a month, there has been no problem.
The selection is good. This is a handy tool to have on hand. Solved my 30 cup coffee maker problem.
Save save. The Whirlpool part was 60 bucks, so I bought one to replace it.
Small and does not turn on except when the weather is right.
As far as I'm concerned, the one I used was quite accurate. In order to verify this, I used my temp gun.