Gebildet 3 pcs 12V 24V Add-a-Circuit Micro2 Fuse Tap, Piggy Back Blade Fuse Holder with Wire Harness, 4 pcs Micro 2 Fuse (5A 10A 15A) and Fuse Puller
Score By Feature
OveReview Final Score
Product Description
Selected User Reviews For Gebildet 3 pcs 12V 24V Add-a-Circuit Micro2 Fuse Tap, Piggy Back Blade Fuse Holder with Wire Harness, 4 pcs Micro 2 Fuse (5A 10A 15A) and Fuse Puller
The gap between the fuses is a little too small, but it still It worked out well in the end. It is not possible for them to fit perfectly between the two fuses due to the lack of space between them. I can't push down one of the fuses the last 1/16" (it interferes with the other fuse). One of the fuses is a little higher than the other because I can't push the other down the last 1/16". In this case, since I think it's only 1/16", I think it's good. Ideally, I believe both fuses should be fully seated, sitting next to each other with enough space between them to be able to pull them. There is no room for a fuse puller in this case, since they conflict with each other. To grab it, I can use some needle nose pliers and grab from the ends rather than from the middle. There are two rows of fuses in the body. There is not much to fault with it. I suppose if the fuses were slightly further apart, I'd have given it 5 stars.
fuses use the new smaller size blade fuses, so we needed to tap into another fuse size. It was not difficult to insert both of the fuses into the taps, unlike what others may have said. I put both fuses into the fuse block, THEN connected it to the fuse block - maybe they tried to put the second fuse in while this was in the fuse block, but I simply plugged in both fuses I have no issue with that. would have liked if the fuses came in multiple sizes, rather than just one amp. It saved me the trouble of purchasing.
An instruction manual should accompany the product. It is almost certain that the average user doesn't know that the tap must be installed in the correct orientation, otherwise the circuit will not be If load wire ran from the front instead of the side, fuses boxes would be more accessible. Nowadays, fuses boxes are cramped and it is easy to install new tap lines in the wrong orientation when repositioning load wires.
A dashcam (BlackVue DR590X) with parking mode was able to tap into this power. It was always possible to tap both at the same time A hot and humid day - In conjunction with The key phrase- You can easily turn on the power. The fuse adapter comes with an opening for the original fuse and also a hole for your new fuse. The pigtail lead has a push connector (insulated) and a mate terminal with an insulator so you can easily plug your wires into it. A crowded dash is especially challenging. My 2019 Fusion Energi plug-in hybrid is equipped with the following components Under the dash of a hybrid car, the fusebox is on the drivers side and is very crowded and difficult to access. I thought it was a big plus that the connection was so easy. In addition to some fuses up to 5 amps, there are also some fuses with various safety ratings. My opinion is that this is a good deal.
As none of the 5 local auto parts stores carried these items, I ordered them online and in two days I had my new radar detector and dash cam installed. Despite being shipped very quickly, the product appears to be of good quality and included everything I needed to install it, That's right, I got four of them for the price of one if purchased at the The quality of the product is excellent.
it has become very difficult to add or upgrade anything to these vehicles now, so these little guys are basically the only option you have in this category.
It is easy to use and does not require any special skills. With it, I added a second battery to my truck, which was then isolated from the negative terminal. A circuit added to or added to the fuse box is connected to or added.
The Crimp connector is terrible. The cable would just rip out of the wire because it would not hold onto the wire. If I were you, I would just get this as an add-on circuit and avoid using the crimp connector at all costs to avoid shorts and issues down the road.