ACTOOL 1" Diameter × 1" Depth of Cut HSS ANNULAR Cutter with 3/4'' Weldon Shank
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The inside diameter of the tube is There are 66 inches in length.
It is possible to do so. To use the 3/4, you simply need to purchase an adapter adapted from the press
The two flats at the top of the bit are at 90° to each other although I am unsure if I understand your question. In order to use annular cutter bits, you must use a special holder. Morris taper, which fit drill presses to annular cutter arbors of all sizes, is available.
If you want to enlarge any kind of hole you shouldn't use an annular cutter. As a result of the aggressive tooth design, it would be almost impossible to center, since it would try to walk around without contact from the pilot pin. You will not be able to visualize an end-point without an extremely accurate end-point In a mill, such as a boring mill, you would probably be better off using a twist drill or straight flute carbide bit if the material is really hard.
Selected User Reviews For ACTOOL 1" Diameter × 1" Depth of Cut HSS ANNULAR Cutter with 3/4'' Weldon Shank
This is the first time I have used a cutter of this type. I drill more than my fair share of holes with my Jet drill press and these things just can't be beat. I keep them cool through the middle with antifreeze and they don't get hot. In less than 45 seconds, a 1" hole can be drilled through a 1/2 AR50 plate.
This could have been a defective cutter, but the hole blower stopped working after the first 20 A mag drill with coolant was being used to drill steel with a coolant. It shouldn't have been a problem.
Using the Annular Cutter for my application was a great experience. In aluminum that is 1/2 inch thick, I needed to drill a number of holes of 1 inch diameter. It took me a few minutes to hold the metal and create the hole with my small mill.
While I have not yet had the opportunity to use the annular cutter to reduce my barrel size for a flash suppressor, the tool arrived on time and appears to be of good quality.
Hole saw that does a great job. No burrs or whiskers on the holes made by this borer. It was a very sweet sight.
This product did what it was advertised to do.
5 inches shorter than sized. The bit I used to drill a hole in 1/4" steel.
Cutting tool of good quality.