Epoxy Resin - Crystal Clear Resin Kit Art Resin Epoxy Clear 2 Part Epoxy Art Resin Clear Casting Resin Jewelry Resin 16 OZ Kit, 1 Instructions
Score By Feature
OveReview Final Score
Product Description
Selected User Reviews For Epoxy Resin - Crystal Clear Resin Kit Art Resin Epoxy Clear 2 Part Epoxy Art Resin Clear Casting Resin Jewelry Resin 16 OZ Kit, 1 Instructions
For crafting, this set of epoxy resin is available. A and B are the two bottles of epoxy resin that come in the box. After mixing them equal parts by volume, stirring them well for 5 minutes, and pouring them into silicone molds, you're done. After that, you will have about 40 minutes to work with the epoxy before it becomes After the epoxy has cured for 24 hours, the epoxy will need to be re-used. My high level of satisfaction with the results of this resin was evident on a few While I was working with the resin, it had a low odor and was clear when it cured. Measure according to the directions shown in the product images but do not follow them. The volume of equal amounts differs from the mass of equal amounts. According to the product images, the measuring is done To measure this product by volume, you should use a volumetric ruler. Following the instructions, you will wind up with sticky resin, rather than hard resin, if you follow the method by mass. By volume, we mean when we measure everything by cup rather than by weight. It is important to note that this set contains rather small amounts of resin, so it could be used for smaller projects like key rings or jewelry boxes. This resin is not enough to create a large project like a chess set with board. Overall, this resin is quite comparable to other products on the market. However, the photographic instructions are seriously.
Based on my experience testing a lot of different resin brands, I can pretty much say that resins are either good or bad, there is no real middle ground. I believe it to be one of the best resins out there! - It had a minimal amount of bubbles It took me about 5 minutes to mix it slowly. It could have been stopped after 4 minutes and I would not have had any bubbles, but I want to make sure my resin is fully mixed so I allowed bubbles to form after about 4 minutes of It is recommended that this product is mixed at one ratio There is one part resin in this batch, which is always a plus. The resin mixes well, pours well, and cures well enough to remove cured items the following day. Although thinner cured pieces are flexible for a couple of days until fully cured, they cure and fully harden unlike some cured products that do not. It's good to have resin. Having a resin like this to work with is wonderful. My betta fish jewelry pieces turned out great and I made smaller earrings, an ashtray, a keychain, and a key ring also. pieces were easy to remove from the mold once they were cured. Normally, I wouldn't recommend a resin over a polymer, but overall this is a nice resin to work with and I recommend.
I coated a sign in resin to protect it as my first project. I found the resin easy to mix, and the 1 ratio was perfect. The ratio is 1 to 1. My system went on easily and I am very pleased with the results. Furthermore, I made molded pieces as well, which turned out to be crystal clear. It's an excellent project for beginners who are looking for ways to get into the resin making hobby. There will be excellent results for you.
A dry time of eight to ten days was expected for epoxy I spent about 10 hours watching it and it was pretty clear. Make sure you work outdoors since it is strongly scented. I found it very easy to work with, but be sure to ventilate well.
It has no spouts. It is off. Since I do not have a high expectation of the brand, my expectations are Lowe's is giving me containers twice as large as I am used to. Due to the lack of spouts and funnels, this is not appropriate for your small adhesion projects where only a small amount of product might be required.
For the newcomer, this is a nice $14 way to explore the possibilities of epoxy resin without spending too much money.