Clear Table Top Epoxy Resin That Self Levels Original Formula, This is a 1/2 Gallon High Gloss (0.25 Gallon Resin + 0.25 Gallon Hardener) Kit
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
An approximate total of 25 minutes is required for mixing as well as the initial pour.
Definitely, it can be poured into molds to make lovely coasters.
Yes, but before pouring, the paper must be sealed entirely on all sides. There was more than one layer of Modge Podge on my project. However, I'm certain there are other products that will work as well.
You are referring to a table outside that cannot be brought inside to be coated. The system, in theory, will work indoors just as well as outside, so long as the temperature is high enough. According to the instructions, the temperature must be no lower than 75 degrees. It works well for me in my garage at 65F here in South Carolina during the The process that I would follow if I were doing this outdoors would be I.A. *br>. Ensure the table is dry before using it. We have not received any rain or precipitation in It is planned for the temperature to be over 65F for three to four It is better to have a higher temperature. 1. 2. 3. If possible, I would cover the ground under the table with plastic and weight it down so that it seals the moisture in the soil. This will ensure that when I apply the coating the soil won't rise. The fourth point. Invest as much effort as you can in leveling the table. If it is not level, the epoxy will run to the low side. Five point five. It would be necessary for me to build a frame that could hold plastic sheet that covered the table and would not touch it. There should be a 1 to 1 ratio at the bottom. By dividing the space into 5 feet, the air can circulate and moisture cannot build up. In addition to end vents in the plastic, there should be side vents as well. 6 *. Upon washing the table with denatured alcohol and letting it dry, I'd plan to apply the coating the following day. To clean this wipe, use alcohol again. A heat gun should be used to warm up the surface. I. 7. Apply the epoxy in accordance with the directions on the package. You can use the heat gun to get rid of air bubbles from the surface by following This is 8. In the event that heating is no longer required, cover the table with plastic. Then, 9. You can evaluate the coating in six to eight hours. In the event of bugs, they should be removed before the next coat is applied. Then remove 10. you are ready to apply the second coating clean the surface with denatured alcohol and dry it with a Once epoxy has been mixed, apply it according to the Cover the frame with the air bubble and repeat the air bubble removal. The eleventh point. Any additional layers should be repeated as well. Leveling epoxy requires a high enough temperature so the viscosity of the mixed resin is low enough to flow. Those conditions can be met by a higher temperature. However, if the temperature is too high, it will cure too quickly, which is why the instructions state to pour out the epoxy in the container after mixing so that it will not heat up. Exothermic curing reactions cause blisters to form. (*br>I hope you find this helpful.
Selected User Reviews For Clear Table Top Epoxy Resin That Self Levels Original Formula, This is a 1/2 Gallon High Gloss (0.25 Gallon Resin + 0.25 Gallon Hardener) Kit
The compound should be poured on top of the Pour a little at a time and DO NOT try to Put only the bulk of the water in.
While the directions state not to scrape the bucket, it does NOT instruct against pouring the last bit on the edge of the bucket where it is dripping
It formed bubbles that we could not get out of the piece where I did this. In the part of my piece where that is not the case, this is an important point that should be noted.
My company has just started producing epoxy resin tumblers and, based on the advice of others, I chose Pro Marine as the manufacturer. The decision I made was one I'm very glad I made. Epoxy is very easy to work with, and the results are as There are two parts to it In Part A there is a thicker part, and in Part B there is a thinner part. Pour equal parts of each into a mixing bowl and stir slowly until they are well combined. As far as bubbles are concerned, I did not have any problems. After that, I poured slowly into my tumbler and smoothed it with my gloved hand. My epoxy was not moving so well after about 10 minutes, so I used a heat gun to get it moving, and then I turned the cup It was wonderful to see my first cup of coffee produce such amazing results. The epoxy was not to blame for any errors I may have made. It was my very first time selling a It is truly amazing what epoxy resin can do. For those interested in learning how to work with tumblers, this book is a great place to start. My order is going to be bigger and I plan to order more. Changing brands will not be an option for me.
Multiple knots, holes, and cracks are being resined in a two-inch thick piece of wood This coffee table is made from cedar live-edged with 1/2" thickness. You won't believe how clear it is after curing! For someone using resin for the first time, I was initially intimidated, but I was able to speak confidently after visiting the website on the bottles for tips and directions. It is a very easy to use program. I warm up in the following room Pour mixture at 1/2 inch, heat gun to remove air bubbles, cure for 24 hours, repeat until project is completed. Mix well for 3+ minutes by volume (not weight), pour slowly for 3+ minutes, stir slowly for 3+ minutes by weight, repeat until project is complete.
I am getting ready to use the product now, and will edit the But first I wanted to speak with their customer service. Their website instructed me to call them if I plan on using the product for anything other than tabletop use, so I called them. Thank you so much for talking with me! I felt very welcomed and comfortable. I received lots of tips from her and she walked me through the process step by step. I have never used epoxy before, I appreciate you showing me how to use it.
Getting back to the photo I've attached, the top coat has a clear top coat (which is so clear it is impossible to tell it's clear) and the bottom layer has a pigment mixed epoxy (green and yellow). The experience working with this product has been great. It takes a long time to pour the mixture when it is mixed as described by the company. It is best to use a torch (micro torch) to get the bubbles out of the mixture after it is mixed. In addition to the quality of their customer service, I must emphasize that Pro Marine receives back SAME DAY to all of my emails that I send them. You can always count on them for help. The epoxy was messed up on my part, and the person helped me with fixing it step by step after I made the mess. There's no way you can see that I made a mistake now! Various types of this product can be sanded and another coat can even be applied. When it gets hot enough, the layers disappear and you cannot see flaws at all (if you made a mistake, you cannot see it). Definitely, I am going to use this product for future projects in the future. In addition, I would certainly recommend them to others because their product is amazing, it's very affordable compared to other epoxy products, it's amazingly easy to work with, and the customer service is phenomenal. I would give it more than 5 stars if it were possible to do so. Pro Marine deserves a huge thank-you! We truly appreciate your hard work!.
I used it on a stainless steel double walled cup that was badly scratched, and it worked like a charm. There is an incredible shine to it. Using it was easy and it was easy to mix. Ensure that you follow the directions precisely. Add equal parts of A and B and stir slowly to keep bubbles to a minimum. For my small amount I measured it in medicine cups since I needed a small amount of this. Nevertheless, I was able to Heat guns were used to remove the stickers, but they could easily be removed. Take a look at the before and after pictures, the difference is striking.
This is a great product for the job. I made the marble look like marble in the shower As a result, this product performs exceptionally well. I had previously used this product to completely refinish my kitchen counters about a year ago. The surface is able to handle spills of all kinds, and if washed and dried, it glows as if it were As long as you follow the instructions properly, you won't have any problems using this product.
In spite of the fact that this worked well for a table top that I made, it does scratch very easily when used, so care must be taken. I had extra on the table since I had miscalculated how much I needed of it. It hardened nicely and I was even able to pour extra on it. The extra I added was flowing easily and blended with what I had already poured, as it was still moveable with a heat gun. It was almost set, but already moveable with a heat gun.
Related Products For Clear Table Top Epoxy Resin That Self Levels Original Formula, This is a 1/2 Gallon High Gloss (0.25 Gallon Resin + 0.25 Gallon Hardener) Kit
