3M Fastbond Contact Adhesive 30NF, Neutral, 5 Gallon Drum (Pail)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
I find it difficult to judge. My deck is 20 feet square and I used 12 quarts to build it. A piece of 1 inch extruded foam is glued to both sides of a piece of 1/2 inch plywood in four foot squares. On foam ply, more glue is required since the fabric soaks it up, as opposed to 1/2 By purchasing in 5 gallon quantities, you will save much more than you would on
I would say no in most cases. In addition, it depends on how the rubber is made. Making a difference makes a big The rubber on a car door (EPDM) is too thick to work with 30. It's rare to find that in a product. The best method for most other rubber compositions is to use a solvent-based method An adhesive that carries water, not one that carries solvent A type of 30 was carried around. Rubbers may be able to be successfully activated with 30 when used in conjunction with the #1 activator from 3M, but it can be difficult to obtain that solution. It would be nice if there were Those who are not in the military rubbers can be adhered to with solvent-carried adhesives, according to 3M. A spray of 80 or 90 is recommended. Rubbers made of neoprene are usually handled with 3M#80 or 1300 or #08001 Super Weatherstrip adhesive 5 oz tubes. You can try 3M #847 if you want nitrile rubber. It is nice to hear from you.
It cost me $222 to buy this stuff last time. The price is for a single five gallon tub that holds 5 gallons total. Yes! I know, it hurts!
Pale is a container with a 5 gallon capacity. The cost, I believe, was about 200-300 dollars The price of the device is $300. In their mind, a gallon is the unit of measurement, so the big bucket would be a case of five.
Selected User Reviews For 3M Fastbond Contact Adhesive 30NF, Neutral, 5 Gallon Drum (Pail)
My floor was covered in cork tiles, so I used this to glue them down. There were some parts of the concrete floor that were clean and others that were covered in adhesive residue left behind by old Congoleum that was impossible to remove. It holds up beautifully on both parts of the floor, and is very easy to work with as well. You can apply it with a paint roller to a surface on both sides, allow to dry for 15 minutes Let the tiles rest for 30 minutes, then start laying them out. Since it stinks, make sure to open all of the windows while using it If it dries, then it quickly loses its smell.
The glue works well for gluing laminates.
Thanks so much! Just what I requested!.
It is also great to use Amazon's service. I appreciate your help.