JGMAKER Large 3D Printer Artist-D IDEX Dual Extruder 3D Printers Direct Drive Extruder Linear Rail Large Build Volume 11.81x11.81x13.38in 98% Pre-Assemble ABS PLA PETG TPU Flexible 1.75mm Filament
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
There are two versions of Artist-D Artist-D Pro and Artist-D. The Artist-D Pro uses a Meanwell power supply as well as an Ultra-Ultra power supply, the TMC2209 There is a silent driver, an optical switch, and a color touch screen. It is possible to run both of them simultaneously with one extruder.
Dual Z-slots were present in the device The components of an axis have the characteristics of dual axes There is a threaded rod as well as a dual-threaded rod A timing belt and motor are situated on top in order to ensure the stability of the unit while moving, even when there is a fault
The firmware for the marlin can be accessed open source, so you can add BL touch. Artist-D Pro has been upgraded to include a touch sensor. Maybe you should give it a shot
The dimensions of a machine after it has been built are Item Dimensions 460*640*630mm
Selected User Reviews For JGMAKER Large 3D Printer Artist-D IDEX Dual Extruder 3D Printers Direct Drive Extruder Linear Rail Large Build Volume 11.81x11.81x13.38in 98% Pre-Assemble ABS PLA PETG TPU Flexible 1.75mm Filament
one calibrated! Auto bed level needs to be incorporated into it in some way, and either getting both nozzles at the same height, or if possible, getting both of them to align at the same height. I have spent days trying different methods to get it going. With the stock firmware I got with mine, mesh leveling was not included. You need the twinkiexlii firmware to use those. I will have to get a mod on thingiverse for these buckets as well since the purge buckets are not really sized for use. I am recalibrating and will try to try the tree frog. The direct-drive is eating through the filament during long prints. If you use both nozzles in that print, you will stop printing with whichever nozzle is used less because the filament is stripped. Update
My bed is warped, and manual mesh leveling only works on one side of my print. I am now getting a replacement printer to see if the leveling issues I've had are just a result of my There isn't much help online for a beginner's printer, but if you google for help, you'll learn a lot. A replacement printer was purchased, along with a level for the bed. The calibration squares that were printed were adjusted over and over again, because it changes when you do the bed leveling with the knobs alone and the paper or plastic that came with it. Even if you do the whole auto home and recheck your points, it still changes. It worked out fine after I leveled it, printed some good squares, printed a carabiner that I actually wanted, and it also came out well. After I printed something else, nothing changed, and I touched nothing due to my bed being too far from me. I went back through the square print adjust again and noticed it came out completely different each time I printed one side was ok, then the other side was messed up even if I didn't change any setting. When I turned off the steppers and pulled the bed, I saw that it scraped against the body of the printer with the screws of the rollers on one side. that much time and filament adjusting, this printer probably will not even work, so I might return it and get a Tenlog printer instead. There was more gunk buildup on this bucket than I had on my original. The rollers need to be tightened first, but it's frustrating. I haven't even started adjusting the second extruder, and it is a hassle because it has five screws that change the adjustment, and all their tightness affects the adjustment. Edit It is important to use the filament you buy until it does exactly what you expect it to do. When you run out of filament, but it's still not working, use it as an indicator that it needs to be returned. It is best to wait until the end of the filament they give you before you become too excited. It would be great if it fixed some of the issues people have with the leveling and maybe didn't allow the second extruder to As of today, mine is officially back up for a return and refund. Maybe I'll get a weedo x40 or tenlog. There is the possibility of using the printer as a single extruder printer with manual mesh leveling, but this is not what the printer is supposed to do it is supposed to be two extruders. Additionally, it has a proprietary nozzle which restricts it.
It seems like they had some design flaws with their printer and their support was ineffective. The screw that was supposed to hit the Z stop missed and the extruder dug into the bed due to poor design. To arrange for a part to be sent and a way to resolve this issue before the 30 day return period expires, I asked. I sent back the form since the letter didn't answer any of my questions. The printer has a lot of potential and I was hoping to love it.
A roll of filament and everything else it needs to get started is also included. I am now going to give you a short list of The pros are Once setup, the removable bed is made of metal underneath, loading filament is a breeze, and it runs perfectly once it's set up. The cons are There is something a little painful about leveling a bed. To level the bed, you need to adjust the main mount screw to make sure the 2nd nozzle carriage is level. This requires a bit of fine tuning. In spite of that, the printer is a very good one, but not suitable.
The printer is very easy to set up, even for someone as new to 3D printing as I am. I am very happy about the outcome of the print. In the past few weeks, I've made a few small pieces. This purchase has been a great experience for me. Everyone, regardless of their level of experience with 3D printing, will benefit from using this printer.
While it is heavy and difficult to use, it is very useful to me. As a result, I am overjoyed with the end product.
It was a very good price and the printing quality was superb. We have several desktop printers at work, a few very expensive ones. They work wonderfully. With the Artist D Pro I have access to features and print quality that I've been unable to get with my more expensive printers.
Since I got it, it's been printing non-stop for me. Because of its direct drive extruders, this printer is really good at printing flexible materials and TPU. Copy mode is really handy to print two parts at the same time. I've never had a printer that can do such a thing, but the HP does it well! I would recommend you pick it up!.
Unfortunately, I am very disappointed in this product!.
It is hard for a person who wants to print a lot of parts to beat this printer for its price and print quality. Currently, I am running four and am on my way to running four more. My purpose is to print VR rifles and they are perfect for what I need. These printers deliver the same quality as similar models, but they print two pages in the same space as a single-head It wouldn't be applicable to me to make an opinion about multi-color inkjet prints since I don't use the printer for that purpose. Whenever I use it, I put the text in "Duplicate" or "Mirror. " My goal is to print as many high-quality parts as possible As well as the great customer service, we have received a lot of feedback. My needs have been met very quickly through social media and the team is willing to help me.
Related Products For JGMAKER Large 3D Printer Artist-D IDEX Dual Extruder 3D Printers Direct Drive Extruder Linear Rail Large Build Volume 11.81x11.81x13.38in 98% Pre-Assemble ABS PLA PETG TPU Flexible 1.75mm Filament
