MybotOnline Nema 17 Stepper Motor Full D-cut Shaft 62oz-in 1.7A Bipolar 38mm 1.8deg 4-lead for 3D Printer CNC Reprap

MybotOnline Nema 17 Stepper Motor Full D-cut Shaft 62oz-in 1.7A Bipolar 38mm 1.8deg 4-lead for 3D Printer CNC Reprap

$ 10.99

Score By Feature

Based on 53 ratings

Value for money

9.16

Giftable

9.01

Packaging

8.97

Customer service

9.32

OveReview Final Score

How Our Score Is Calculated

Product Description

The NEMA 17 Stepper Motor is available in two phases up to 62 Amps. Having high holding torque, low noise, low step loss, and low cost, and 31 ounce-in (44 Ncm) holding torque is a good combination.

A current rating of 1 reflects the current status. A. 7. The angle of the step is 8° (200 steps per revolution). A frame size of 1 is appropriate. This model has a square body with a diameter of 65mm(42 mm). A full D-cut shaft has a length of The diameter of the shaft is *87".

There are two cables, one 37" (1m) cable and one 2 pin cable. The 54mm (0. It is easy to install because it uses M3 screws. Connectors Red (A+), Black (+), Blue (+), Green (+) Tip Not only replace the old motor, but also connect the new motor to the wires

The product is CE and RoHS compliant. Foam cut into squares and packed tightly.

3D printers, CNC milling, small robotics, stage lighting, laser engraving, textile machinery, medical equipment, placement machines, automation equipment are among the items that are frequently used. The following after-sales service is included a replacement or a refund for the defective motor. Feel free to message or QA us if you have a question, we and our engineers will assist you as much as we can

Questions & Answers

Can you tell me what the voltage is for I appreciate it. ?

My sincere thanks go out to you The drive voltage is 12 volts

Can you tell me what the voltage is for I appreciate it. ?

Voltage of the driver is 12

Selected User Reviews For MybotOnline Nema 17 Stepper Motor Full D-cut Shaft 62oz-in 1.7A Bipolar 38mm 1.8deg 4-lead for 3D Printer CNC Reprap

The words "fast, good, and powerful" describe what we do best

5/5

The motor is intended to be used in a DIY Bowden Extruder (pictured) for a build of my own RepRap 3D printer. Got this NEMA 17 motor in record time, dropped it in my printed holder, snugged up the mount, plugged in the connector, mounted my Bowden parts and it works like a charm. The 62oz-oz motor has quite a bit of power Torque for an affordable price (compared to others in the lower 40oz range I am in the I am not able to verify this torque specification, but can only compile it against other motors purchased in the past. If you ever need to reinstall your computer, it becomes handy to have more powerful motors available Recommend this seller and would purchase again for other printer builds. Some of the items can be used or recycled in future builds.

Autumn Leon

| Apr 13, 2021

The little stepper works great

5/5

The rotary attachment on my laser engraver works great with these. I installed the Nema17 stepper and it worked perfectly, but I had to switch to a much larger Nema23 stepper for the rotary attachment because the existing driver created too large an electric current through the smaller My little Nema17 will be put to good use in another way.

Landry METCALFE

| Mar 02, 2021

A replacement for an Ender 3 is NOT an upgrade

3/5

The motor is only an acceptable replacement for stock. It is a relatively weak motor. As a replacement for a burned out stepper, this will work just fine. Just don't expect a "higher torque" than stock. You should turn down your stepper driver power output if you start to hear or see it heating up. As was the case with my E3, I had to reduce the brightness from the stock setting. I believe this is a MEH part.

Sofia Garner

| Jun 28, 2021

It is true

5/5

Buying these has taken some time.

This is the result. A lot of good quality is built into them. Their intended function is very well carried out, and they perform as intended.

Karen Ferguson

| Apr 29, 2021

The system is ready to use

4/5

Using the Nema17 stepper motor is the first time I have experimented with one. The feeling of the knife in the hand is good, and it has a fair amount of toque in All documentation was included in the box along with the packaging. I would consider buying again in the future.