Siraya Tech Fast ABS-Like 3D Printer Resin 405nm UV-Curing Non-Brittle High Precision 3D Printing Liquid Standard Photopolymer Resin for LCD DLP 3D Printing (Creamy, 1kg)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Mine was orange and had a faint odor of a dead cat, so it could have been out of date.
yes it. This resin was created with LCD printers in mind, and you can learn more about exposure time on siraya. tech
I've had consistent good results with this resin at around 16 degrees Celsius without having to preheat it. I'm sure keeping the resin warmer is better, but I'm printing inch-by-inch. Miniatures made of high-quality plastic with excellent detail and no flaws
Selected User Reviews For Siraya Tech Fast ABS-Like 3D Printer Resin 405nm UV-Curing Non-Brittle High Precision 3D Printing Liquid Standard Photopolymer Resin for LCD DLP 3D Printing (Creamy, 1kg)
It will remain nice and flexible if you cure it. I wanted to make tabletop miniatures with something that wouldn't break if dropped, especially if the miniatures had small weak parts, such as swords. In the past, I've used Elegoo, Anycubic, and Sainsmart resins, all of which are good but brittle. I'm trying out the green Siraya, and so far it's working out well. It prints quickly and with great detail, and it maintains its flex as long as I cure it quickly (two minutes in a glass jar of water with a UV light). Also, I discovered that soaking the finished mini in hot water for 5 minutes or so after printing softens the resin just enough to allow the supports to come right off, leaving no dents or chunks behind.
The resin comes in a single 1 liter bottle rather than two 500ml bottles, which I prefer, but they leak. Two 1L bottles were sent to me, and both of them leaked inside the box. When I opened it, resin splattered all over me, my clothes, and the ground. Despite the fact that the caps were on, there was no "leak-age. " The 500ml bottles have a "proof" seal ring, so the packaging needs to be fixed. As a result, I'm going to use 1 as an example. It's 2L per week, so it's good. All that's left is to perfect the packaging.
This is an excellent resin to work with. The details are visible due to the color. The failed print was due to a user error: there were insufficient supports. Original photon was used to print this piece. I've gone through about 5 liters of this, and it's now my go-to resin.
As a result, this is a fantastic value, with a fantastic grey color and fantastic printing detail. The non- On the other hand, the brittle claim is unsubstantiated. It appears that this resin is no less brittle than Elegoo or Nova3D resins if you flex it very far or impact it sharply.
Overall, the resin is good, and the print is good, but it came at the expense of a brand new FEP film for my printer. Running this on a Phrozen with the official Siraya's site parameters results in a large tear where you're printing after two prints because it sticks so badly to the FEP. I repeated this twice, wasting two FEPs, which are expensive for the large Phrozen Transformer. I changed the exposure to see if the site parameters were off, and it worked - Following two prints, the same thing occurred - FEP is no longer in existence.
On a Peopoly Phenom, I've been using this resin, and it's fantastic. br>br>I use Siraya Tech's resin settings; Peopoly also has resin settings that are slightly different, but I haven't tried them. br>br>The resin prints flawlessly every time; the surface quality is smooth, supports are easy to remove, it has a low odor in comparison to other resins I've used, and it has a low viscosity, making cleanup a breeze. br>br>Because the Phenom is a large-scale printer with unique requirements, it only comes with a small selection of resins. I used to use Peopoly's deft resin, but this resin is half the price, prints just as well (if not better), and is readily available on Amazon with prime shipping, whereas deft resin is frequently out of stock. Because there is no stock in the United States, I must pay for expensive international shipping. I'm glad I found this product. br>br>I tried printing with Siraya Tech Blu's resin on the Phenom, but the resin wouldn't stick to the build plate, resulting in failed prints. That resin is also much more viscous, making it more difficult to clean, so I wouldn't recommend it for the Phenom.
I like the siraya resins a lot. This FAST is ideal for minis because it is significantly thinner than BLU, making cleanup a breeze. br>Ignore the base on the left mini, which I hacked up due to a slicing error. A few BLU minis can be found to the right. br>This is now my go-to resin for miniature prints.
The prints are very easy to clean and only take about three minutes to do so. With some shaking, 5 minutes in IPA. It will outperform anything that comes from an FDM machine, so if you're looking to make some mechanically strong parts, this is the machine for you! Although it will still fail as a "Brittle Fracture," it will deform much more elastically than standard resin. I put it through its paces in terms of heat resistance, and the resins are behaving oddly. It doesn't have a Glass Transition Temperature like thermoplastics, but around 240 degrees Fahrenheit, its strength begins to deteriorate noticeably, but it appears to recover after cooling. I've heated this resin to over 400 degrees Fahrenheit and it doesn't appear to break down much, but it will be very weak while it's hot.
Related Products For Siraya Tech Fast ABS-Like 3D Printer Resin 405nm UV-Curing Non-Brittle High Precision 3D Printing Liquid Standard Photopolymer Resin for LCD DLP 3D Printing (Creamy, 1kg)
