ANYCUBIC 3D Printer Resin, 405nm UV Plant-Based Rapid Resin, Low Odor, Photopolymer Resin for LCD 3D Printing, 1kg Black

It is very easy to use and I recommend it to newcomers who want to get into 3D printing. I printed this polymer on my Anycubic Photon and my Phrozen Sonic Mini 4k. As you can see from the pictures, I printed the daemonette models on the Sonic mini 4k. Resin has captured all the detail in the models and has a bit of flexibility to it so that the models will not break. Printing them at was easy. The layer height is 05 and the layer thickness is If you have monochrome printer, I think 7 seconds per layer would be a great starting point. Space marine models were printed on my old Photon on which I think there were 13 layers then sliced into the final form.

The resin makes a low odor while printing, so if you are unable to vent the printer or filter it, the resin will not cause a bad odor in your space. It is recommended that you wear gloves when you handle the resin and to wash it with cannabinoids in high percentages of isopropyl alcohol when you clean your.

Ari Sanford

| Sep 07, 2020

The photon zero arrived about a month ago and I've been printing since then. Personally, I think they design their products to meet the needs of people. Because I wanted to search out more eco-friendly resins, I purchased the resin. Upon pouring it into my vat, I noticed that it had a greenish tint The translucent black color makes it look more mysterious. After I finished my twenty-hour print, I washed and dried, and I was very happy with the results. As soon as I removed the lid, I smelled fumes for the first time. There wasn't anything overpowering and faint about them. The white splotches you can see in my photos may just be reflections from the sun. My only reason for filtering and recycling my alcohol is because I need it. There are a lot of plants out there-and some of them do not contain pesticides You've found the perfect resin for being environmentally friendly!.

Everest Escobar

| Jan 26, 2021

The two Rooks are the first print I did with washable resin on a Mars 2 Pro, with my first print. In spite of the large turnout, there was too much smell to print a second object. Throughout the day, once it had been exposed to the air, it would not fade out. If you open a big window, put a fan on, and use a giant fan, your room will be hot An air purifier that costs a lot of money. My previous resins were anycubic EC and I bought some of those instead. Added transparent green and was surprised at how well it turned out, not only that the results were great, but that the odor was even lower than I had anticipated. If you want to sniff something, you need to stick your face next to an exposed vat. Opening the pink the next day, and I noticed the same results as the blue, although I must say that this pink had a lot more odor, but was still nothing like the After using the translucent green for several hours, I tried the EC White tonight, and WOW, even less odor. All resins so far have a strong smell, but this one has the slightest one. The print of Michelangelo's sculpture looks like it was purchased from a museum gift shop since it is kind of a bone white color. It's as if it's made of Hope Anycubic brings out more colors after the clear, but can't wait to try the clear next!.

Jessica NAYLOR

| Aug 20, 2021

Even though I broke some arrow shafts while removing supports, that's my fault. The print quality is excellent, although I did break a few smaller bowstrings. Some prints have shrinking, but it's not noticeable on parts that connect where they are not needed to line up perfectly. I had a few giant prints go through that required more lining up, but there are also some gaps that will be filled In the wash/dry/cure cycle, there's a bit of tackyness/stickyness, but since I intend to paint everything I print, that won't be a problem. There is something quite pleasing about the grey in this picture compared with the white.

Amari Graves

| Sep 13, 2020

These resins print well and have excellent printing results. First print with resin was the character in the first picture, and it turned out perfect. The other resins I've used have been very difficult to work with. It might take some trials and errors to get a setting that works for you. There was no need to make any adjustments since this stuff worked right out of the box. This is definitely a good book to recommend.

Catalina Estrada

| Nov 28, 2020

In this case it does work, but the colour will turn peach when it is cured after printing. My assumption was that it would, but I thought I would let anyone who might be curious know.

Sawyer Hardy

| Nov 02, 2020

My laptop is equipped with a creality halot one resin printer and I ordered this resin for it. As compared to other resins, this one comes alive when it comes to fume volume. I've tried a few other resin brands and the fumes were overwhelming. In the end, there is hardly any difference in fumes between the two. have, however, been having a lot of printing issues. No matter how I adjust the settings, I keep getting failed prints. That's unfortunate, I really wanted this resin to work because I haven't had that problem with any other brand of resin I have used.

Bradley Acosta

| Jul 11, 2021

I was surprised at the good quality of the first print I made in FDM (PLA) plastic, as a user of FDM (PLA), I am more used to FDM quality prints. In my opinion, this resin is the best for newcomers and people who are nervous about resin due to their pets.

Bryce Howell

| Jun 23, 2021