LotFancy Cut off Wheels, 4 Inch by 0.045 Inch, Angle Grinder Cutting Wheels, Metal and Stainless Steel Cutting Disc, 5/8” Arbor, Pack of 10

Starting with a pallet, I cut off any nails that I might have hit or been kicked back by a saw. My 25-year-old son had a 25-percent poop on his front teeth after I removed his There is an antenna mast beside the house that measures 6 feet tall. A tapered end of a 1-inch base was used to secure the base The rods are drilled down to a depth of 1/16". The rod, sticking 5" above ground, was too solidly embedded in the ground for me to move. Over the past 20 years, the hazard has been wrapped in pink tape so it can be easily seen. I was able to remove it quickly and neatly using the cutoff wheel. By keeping the pressure low, the resin would not be softened by the heat, causing damage to the wheel. As a result of keeping the pressure light, it was easier to prevent rotating the wheel, which might have resulted in damage. I then cut up the pallet and the rod and found that the wheel was 106 mm in diameter after that. About 4mm in diameter. There were 106 wheels in a new wheel. Eight millimeters. A barely broken in boot is what I'd call it.

Matias Walton

| Jan 19, 2021

In the middle, there is a metal disc that centers the cutting disc, but it is paper thin and stuck in place with hot glue so no matter how hard you crank down, it still slips out of place. As soon as the grinder is started, you can hear them slip, and then if you apply any pressure to the disc, it will bind and spin on the grinder's After that takes place, it won't take long before things separate to the point that the center and whole thing disintegrate. It may as well be cardboard cutting discs, since they would last just as long and at the very least they wouldn't threaten to kill you whenever you turned on your.

Gracelyn Kane

| Jul 25, 2020

The cost of this brand was significantly less than that of other brands. As I do not spend a lot of time cutting or grinding, I can't compare these wheels to DeWalt or other well-known name brand wheels. However, they fit my 4" B&S, so I am quite happy with them. These work perfectly on my angle grinder, seem to be on par with any other wheel, they cut what I need to cut, and I like the multi-blade system There is a good chance I will be able to use my pack for years to come. I've compared this listing to other similar listings on Amazon AND box stores, which I thought was a great deal.

Ariya Hamilton

| Mar 15, 2021

These cut-off disks last just as long as the more expensive ones at a much lower price.

Jaxxon Martinez

| Mar 21, 2021

I just used one of the 4 inch models. A disk is needed to cut the rim (3/8 in. An iron vessel's )off layer. With my Makita grinder, it was easy to grind. You can definitely count on me to buy from you in the future.

Duke Moyer

| Apr 04, 2021

The blades were bought in a pack and some lasted 20 minutes, while others lasted only 5 minutes or so. My job was to cut sheet metal for a metal building, so it wasn't too strenuous work. I was just making straight cuts, and some of these blades just It is so hard for me to give a bad review to a product, but this really deserves one.

Ryan Cervantes

| Aug 21, 2020

The quality of what you get depends on how much you pay. Using these is okay for rusty bolts or sheet metal that is thinner than 1/8" thick. If you go beyond that, the metal ring insert won't hold up, making the cut off wheel inoperable. In total, I got $9 worth of work out of all 10 cut off wheels, but I'll stick with the name brands for the foreseeable future.

Raina Lopez

| Feb 17, 2021