Rev-A-Shelf BRC-14CR 14-Inch Wall Mounted Pullout Closet Belt and Scarf Organization Rack Accessories Holder Hanger with 9 Hooks, Chrome
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
There are a couple of screws, yes. It can be mounted to the right or left of the body.
Without a doubt. You have the option of having three. Per peg, there are four belts to choose from. I've got 20 of them. On my rack, I have a total of 25 belts.
It could be mounted on an 11-inch wall, but it would protrude 3 inches beyond it, and even more if fully extended. It could also be angled upwards to stay within the 11-inch limit.
Selected User Reviews For Rev-A-Shelf BRC-14CR 14-Inch Wall Mounted Pullout Closet Belt and Scarf Organization Rack Accessories Holder Hanger with 9 Hooks, Chrome
Changing the direction of the sliding door is unnecessarily difficult, and the instructions that come with it are woefully inadequate. Here's what you should be aware of: br>br>1) you'll need a screwdriver and an adjustable wrenchbr>2) this is a two-person jobbr>3) it's a two-person jobbr>4) it's a two-person jobbr>5) it's a two-person Holding the wrench tightly over the nut on top of the rack to keep it from moving while turning the screwdriver in the screw beneath the rack is a one-handed maneuver. br>3) Reattach the faceplate by rotating it 180 degrees. br>4) Use a screwdriver to gouge a hole in the faceplate to make one of the screws fit when reattaching it, as the holes don't align after rotating it. br>5) And what about those tiny decorative caps that go over the screws? Don't hold your breath that they'll make it through step two. They are not going to do it. br>br>The rack is sturdy and moves easily. Just be aware that changing the sliding direction will be a challenge. They can assist by: br>br> 1) In the item description, include an accurate photo. 2) Don't overtighten those acorn nuts. 3) a more detailed explanation of how to change direction (not just "remove acorn nuts," but also "what to do with decorative domes over screws," what tools you'll need, and how to remove the nuts).
This is a very sturdy sliding rack. Ball- Smooth operation of the bearing slider. The only issue I had was trying to reverse the slide's direction for the installation I wanted. This is accomplished by removing screws from the face plate, flipping the plate, and re-installing the screws. putting in The screws are too tight and easily strip during this process, as other reviews have pointed out. Despite knowing this and using the appropriate tools and screw driver bits, I was unable to keep the screws from stripping. Simply put, the factory is putting them together too tightly, and the metal is too soft. I had to drill them out and replace the screws with new ones that I bought at a hardware store.
California Closets recently helped us improve the walk-in closet in our bedroom. inside a closet However, after the job was finished and we moved back in, I discovered that the closet was missing one belt holder. br>br>This belt holder worked and fit the closet system perfectly, and I saved a little money over CA's belt holder (though not much in the grand scheme of things).
I was looking for a way to store and access brooms, mops, and other cleaning supplies next to a cabinet along the side of a wall. It was simple to put together and is ideal for storing items in the laundry room that are out of sight. Items can now be kept off the floor and accessed quickly when needed.
I needed to change the direction or reverse it. It was as simple as loosening three screws, flipping the bar over, and tightening them again. The nuts and bolts were firmly fastened - Your grandmother isn't going to let them out - With a good screwdriver and a small crescent wrench, however, it's not a big deal. This extends all the way to the cabinet's front - There are three pieces to this slide, and it extends fully. It can easily accommodate ten belts, two suspenders, three western belt/buckles, and a bolo tie. I've got the hooks in a double row.
This is a great product for keeping your belts accessible, but because it fits against a wall and pulls out, it doesn't take up valuable space where your clothes hang! I have this in my closet, along with a tie rack, and it has helped me save 6 to 8 inches of rod space.
They make it so much easier to organize your closet! It was simple to set them up and use them. The slider is well greased and glides smoothly back and forth. Overall, a top-notch item.
Make sure you're ordering the right size. This item comes in two sizes, so keep that in mind. If you choose to install with existing Euro holes in your shelving, this has an impact on the overall usability of the pattern. This turned out to be too long (14 inch), so I went with the 12 inch model, which was more appropriate for the hole pattern.
Related Products For Rev-A-Shelf BRC-14CR 14-Inch Wall Mounted Pullout Closet Belt and Scarf Organization Rack Accessories Holder Hanger with 9 Hooks, Chrome
