WorkPro Quantum 9000 Series Ergonomic Mid-Back Mesh/Mesh Chair, Black
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
There are 5 "legs" or spokes on the chair, each with two wheels. The wheels are mounted to each spoke. Hardwood floors are great for rolling the chair but over time the polish will wear away. If the floor is a concern, replacement wheels made to look similar to in-line skate wheels will roll more easily and prevent the finish from wearing away.
You're right, I did it! You don't want to pull it up all the way because it will drop down for good once it has been released. Take your time and stop short If you hear or feel these clicks, you'll know they're there.
In fact, yes. The knob and 3 switches are located on the front. Depending on which switch is pressed, the adjustment will be locked or released differently. In the left side, there is a switch that can be used to adjust the angle of the backrest. When it is released, the backrest can rock from 90 to In the bottom right corner, you can adjust the tension of the backrest hinge by twisting the knob. You can use this feature depending on how heavy or tall you are so you don't bump against the recline limit too hard. The switches on the right adjust the seat's height and allow it to be slid out from under you.
The minimum distance from the seat cushion top to the top of the back is 17 inches, and the maximum is 20 inches. There is a 3" distance between the start and end points. Thank you for reading. I hope you find it helpful.
Selected User Reviews For WorkPro Quantum 9000 Series Ergonomic Mid-Back Mesh/Mesh Chair, Black
When I took out the allen wrench that came with it and saw that the wrench was about seven inches long, I knew that I was on the right track. In fact, you can get a real amount of leverage from that, and they didn't use a short wrench like most manufacturers do! There are few bolts and a wrench in a cardboard/plastic shell that is easy to handle and keeps the wrench securely in place There are images, words and numbers on the mark. Moreover, a spare bolt is included with each type of bolt. There are also particular clear "warnings" around one step which would be easy to screw up if not done correctly. They make the assembly very easy, but there are clear directions for building the chair. We need to keep in mind (i) it is The box in which it was delivered made that clear to me Well, I'm glad to hear that! There is a lot of metal and solid plastic (ii) the assembly is super easy. It took less than 15 minutes with only 8 bolts, (iii) it's solidly constructed It seemed like they used one bolt to attach the back to the frame of the chair - I needed to return it Four bolts AND a tongue-in-groove technique are used in this chair! There are no moving parts anywhere in this back with (iv) a limited lifetime warranty, with instructions to call the manufacturer if anything goes wrong. The promise is that the parts can be shipped within one week I'll get back to you in two At the moment, I'm sitting in the chair, which is very stable and comfy. There are four ways to adjust the height total height, armrest height, and armrest orientation as well as distance of the seat from the mainframe and height of the The back can also be locked or unlocked so that you can lean back as far as you wish and lock it back down afterwards. The manufacturer of this chair does not work for me and I paid in full for it. The value of what I do just appeals to me. With regard to this chair, I can compare it to any Aeronk/Herman Miller chair (which I've previously owned), and that chair cost me something like three times what I paid for this one. It's OK to proceed It's time for me to get back to work so that I can pay for that chair. I wish you the best of luck with this. I would like to thank the manufacturer for his cooperation. You're doing a great job - keep it up! The way you run a business is similar to how I would.
In an office max or office depot, they had several different chairs and it was up to me to decide which one I liked the best. They have little cards you can take with you that describe the product, and the price was the same on here. That's where Amazon gets the chairs from. Despite its price, it is handy for a short person- the seat back goes up and down, and the seat bottom travels forwards and backwards. You will find it to be very comfortable and a perfect fit. Despite being a woman, I was able to put this together very quickly. It was extremely easy to do right from.
WE ARE UNABLE TO GET A WARRANTY FROM THEM. I strongly advise you not to buy!.
A chair that comes close to an Aeron Chair, but is worth the price and will do the job well. I have not found a chair that has ever provided me with as much comfort and support as Aeron does. There is only one minor complaint I have swivel armrests can sometimes be annoying. If they were locked in position, that would be nice.
Here we are. Currently the chair. The mesh seat and back, as well as the adjustable levers, allow for a comfortable and customizable fit. I was able to set the height, back, seat, and arms to my ideal position and the sturdy construction means that this is a worthy alternative to Herman Miller. I found assembly to be quick and Since I only found the instructions after I was almost finished assembling it, it was a good thing that I didn't lose any time. This is the most comfortable office chair I have ever used. I've been using it for about a week and can honestly say that it has kept me very relaxed. The purchase I made was a great deal for me.
It wasn't clear how to rate it. There is good quality in this product. Despite the construction being solid, it performed well. A decent amount of adjustment is available. However, it doesn't really function within the realm of keeping the back straight, as I had hoped it would. As long as I keep my spine straight, the pain I get in my back goes away. of the chair is excessively long, limiting the ability of the spine to properly engage the back part of the chair in order to help stabilize and align it. A forward most position on the back still wasn't enough for the back to respond. As well as being wide, the seat is also quite comfortable. The butt of this brother was still considerably smaller than the seat, even though I am five feet seven inches and 230 pounds. You might have squatch if you live in the wild. If your femurs are the right size, or if you don't need spine straightening support, you'll be fine.
There must be something to heaven when it comes to office chairs. With its price point, you had better believe this is the Cadillac of office chairs. This chair is extremely comfortable because of its ability to adjust not just the height and back angle of the seat, but also the seat moves forward and back as I move or locks in one position, meaning that I can adjust them all at the same time and ensure comfort. It is exhausting. I have never experienced a mesh seat that was more comfortable than any chair I have ever owned or used, firm and soft but not "mushy", and the mesh allows air to flow, keeping it from becoming too hot. The fact that it does not cut off circulation in my legs after hours of use like others I've owned due to a too sharp angle front to back is also a big factor for me. A chair like this would definitely be a purchase I would make.
A comfortable chair like this one would be great. I did not expect the seat to be quite as springy as I did. One area of the experience felt a little jumbled right out of the box, but I think that's just how it is. Also, the one I saw in the store was like that, but I thought it was just due to being displayed. Although it was available in gray, I wanted black. I preferred the feel and look of the "WorkPro Commercial Mesh Executive Chair" model. This chair has so far been good to me in terms of its wheels. (My previous chair was significantly cheaper, so I expect that this is to be expected) They roll much more smoothly than the ones on my previous chair. When I was able to schedule the professional installation, I cancelled it. I'd initially ordered the installation, but then canceled it after seeing how long it was going to take. The money I saved will go to a good cause. Despite my inexperience, I was able to put the chair together I would say it was a moderate level of difficulty I probably would have had an easier time if I had waited until I had someone to help. I'm impatient, though. All in all, I think the chair is a good purchase, and I recommend it.