Sanus Adjustable Height Speaker Stand - Extends 28" to 38" - Holds Satellite & Small Bookshelf Speakers (i.e. Bose, Harmon Kardon, Polk, JBL, KEF, Klipsch, Sony and Others) - Set of 2 - Model: HTBS

The people complaining are correct, and this is the Using my photos, you can see that by rotating the bracket instead of installing it as instructed, plenty of room is created for the wire, and the bracket still appears to be very stable. Glue the rods to the rod bracket as instructed, then screw the speaker to the bracket instead of screwing it to the stand, then attach the bracket to the vertical stand. Removing the stand will allow you to tighten the speaker screw because it blocks access to it. To ensure speaker is firmly attached, screw bracket to speaker.

Kyla Gross

| Mar 07, 2021

Listed under the "frequently bought together section" is a 1. channel sound bar with wireless subwoofer and satellite speakers (2015 Model). Nevertheless, the stands do not seem to work as well as I would like. There is an issue with the cables connecting the satellite speakers to the subwoofer. They are too large to fit through the small cable holes found In addition, the speaker connection is so large that you cannot screw the satellite speaker in securely without it pressing hard against the cable, which is another reason why this connection is a bit risky. In addition to my concerns, I have attached some photos. Due to my own lack of research into product compatibility, I am responsible for this oversight. The fact that enough people have bought both of these products together with enough frequency that Amazon will list them together is a matter of concern for me. It is my hope that this review will help break at least a little bit of this association.

Ariel Pena

| Mar 22, 2021

I am very happy with the product and the quality for the price. All four Bose surround sound speakers were originally set up with stands and the stands have fallen apart. My search for new ones brought me to amazon, where they sell them for 120 dollars each. I'd have to buy two if I had to buy one. The amount is $0. 00 dollars ). Amazon suggestions had me tempted to buy these ones when I was ready to bite the bullet and buy them. My order was delivered today, and I am happy with the purchase. This product is a quarter of the price and has amazingly good quality. Bose stands will not fit my speakers, but my speakers screw straight into the stands and I think they look better than the Bose stands. Although there is some assembly required, if you're like me and have half a brain it's not such a big deal. It is a good idea to run the wire through the tube before assembling the two halves. Then, to pull the wire out of the little hole, make sure you steal your wife's best tweezers in order to grab it and pull it through. As I bent your wife's tweezers during the process, order new ones for her right away if you're like me.

Jianna FitzGerald

| Mar 11, 2021

A sound bar and surround sound rear speakers are part of my Samsung TV sound system. There is a model number PS- for the rear speaker KS1 - KS3 The first one (as shown on the There are different sizes of mounting screws included with these stands, but the keyhole opening in the back of the rear speaker will not fit with any of them. The optional two-symbol format was used This is a method of mounting tape that can be used. Samsung's speaker wire connector on one end is so large that it must be fed up through the pole to the speaker, so the wire must be fed through the base of the stand. have a decent weight, a stable base, and a good build.

Lilyana Ayala

| Apr 06, 2021

As far as I knew, I did enough research on these to ensure they were going to work with my 38" Vizio Although I didn't intend to use 1 surround sound speaker, I guess I did. This is because, as you can see in the first picture, the speaker cable ends are bigger than the hole on the speaker stand through which the wires are supposed to fit. Seeing the second picture again, you can see that the wire needs to be wrapped around the speaker stand since the tube won't fit it. It can stand up to the Vizio 38" 5 speaker without any problems, but it seemed to not have been designed for it. Surround sound is provided by one speaker. It would have been nice if I saw a review like this before I bought the speaker stands for my surround sound. I wish I would have seen this before I bought the speaker stands for my surround sound system.

Dylan Noble

| Jun 20, 2021

Easy to do. Since numerous reviews stated that these would not fit the wires and connectors on my vizier 5, I knew they wouldn't fit. It comes with one sound bar with two speakers in the back. But the system I found didn't really seem to do that. As a result, I removed the rubber lining from the end of the plugs, straightened the upper arm that has curves in it, cut a larger opening where wires usually come out of the upper arm, and pushed the plug through with a coat hanger. Though the process wasn't without its difficulties, the end result is cleaner than it was
Therefore, if you are handy, you can modify these into a workable device. This build appears to be of good quality overall. The carpet stays in place because it is heavy. A black powder coat is nice. It comes with multiple types of hardware for a number of different uses.

Summer Graham

| Jul 08, 2021

These stands are heavy duty and good. This is what I bought for my Samsung HW-200 There are two rear speakers on the K950. The soundbar rear speakers work with these and there has been some question about whether they will work with the Samsung soundbars. A variety of plates are included so that the stands can be used with The sheath is heavy and nicely coated, but there are a couple of things to keep in mind The L brackets that come with the aforementioned speakers point the speakers upward when installed. I had to tweak (bend) the brackets to direct them Furthermore, it has a wire management system for speaker wire (a hole near the top and a hole in the bottom, which can be used to run speaker wire invisibly), but there is no way to run power cords (the plug is too big to fit into the If I use black wire ties, they will be small. Secondly, the hard floors are scratched by the pads they supply to prevent the stands from scratching them. Basically, they are electrical tape dots (as if someone used a hole punch to create a series of smaller circles from 20 to 30). Getting 20 hole punched dots to stick to the ground at the bottom of the stand was tedious (imagine removing the backing from 20 hole punched dots and then sticking them to the ground). They could add some more substantial rubber pads for a few dollars more. They are adjustable and seem to be fairly good stands apart from that.

Landyn Hays

| Nov 21, 2020