Casual Home Sunrise (Small) with Solid Maple Top Kitchen Island, 22.75"W, Natural&White
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Hello, I believe the age of your account is The shelves can fit a microwave of up to 18 inches. There are 22 lines in this paragraph. It has a length of 75 inches and a width of You can place up to 30 pounds on the shelf.
They painted over the fact that no one could tell. However, it is wood, so it is a good
I hope that helps! Ours used to be hard to close, but after some usage, it has loosened up and now closes without any trouble.
As for me, I used wood glue to put the drawer together since I was also short one screw. That was all the effort I wanted to put into it. One screw was already short and to make matters worse, one of its heads went through a huge hole in the wood, so I couldn't assemble the project.
Selected User Reviews For Casual Home Sunrise (Small) with Solid Maple Top Kitchen Island, 22.75"W, Natural&White
It has a good aesthetic, is reasonably sturdy, and seems like it would hold up well over time. In the drawer you might have a problem because it is too small and therefore does not ride correctly on the rails and jams when you open it, so you need to shake it violently and curse in order to remove it from the rails.
Reviewers have set unrealistic expectations in several reviews I've seen. The product is accessible to everyone, and it's inexpensive The piece of furniture is fairly large and well produced. As far as what it is goes, it might be the best I've ever Do you have to spend a lot of time putting it I guess so, but it's not really that serious. The allen wrench was pre-assembled and it came with a pre-reading tool While these things do have drilled holes and are not exactly fun to construct, this was very straightforward and simple to assemble compared to similar furniture. I completed the project in forty minutes, including disposal of the packaging, after following the clear instructions. I used all the hardware, and disposed of the I feel that this drawer is not as good as a drawer like an expensive one because it does not glide smoothly. This isn't an heirloom piece of furniture - it is just a cheap table intended to be used for a while before it breaks and has to be thrown away. The piece looks pretty nice, though any woodworker would spot it for what it is almost instantly. You will likely have to look elsewhere if you're seeking something beyond that, and be prepared to pay a lot more. My apartment is rented out to a couple, and I bought this piece for it because it is functional, looks decent, was the right size, and if the tenant trashes it or takes it I won't care too were going to get something like this for my home, I'd build it (decent hardwood, rails, and other materials alone would cost about the same amount as this table) or purchase one from an experienced As with anything, you get what you pay for, and this unit isn't fine furniture, but it exceeded my expectations in so many ways.
To begin with, make sure you unpack carefully and snap a couple of photos during that process in case you I didn't find that a problem for this piece, but you never know in case it doesn't work out. In addition You should look at all the pieces to ensure that they are in the correct position and This time it was not a problem at all. * Assembly An hour and a half. Alternatively, you could put the top upside down on a table and attach it that way. To prevent possible damage to either item, the whole set was assembled on my kitchen table under a folded sheet covered with a blanket. My most valuable find was that I was able to use the Allen key to get clearance using the partially assembled piece when it was situated near the edge of the table. It's a good key, a better quality than most others you'll find with furniture of this kind. As well as a Phillips screwdriver, you will need to have one on hand. This helped a great deal when I used a small ratchet screwdriver with a Phillips bit. Here's some advice If you're using a battery, please do not When it comes to this project, you should not use powered or electric tools since you should be able to feel how far you are going. The only thing I did was hand-tighten one piece to hold it together (it was minor and hidden, so it wasn't a big deal). Be careful not to overdo it Lock it down! Top of page Finished in a beautiful way, the top is made of real wood. This is a very good product. Cutting with it is supposed to be a pain, it's not made for that. This drawer contains As I mentioned, I forgot to screw down one drawer side, and only alternately tightened every other drawer screw, so the drawer is holding together perfectly. But there is one messy spot on the drawer interior, where the front meets the side (see photo), so that will be taken care of It is very shallow, but it is good for holding small items. However, the drawer glides work well but the drawer does not sit perfectly flush on the left due to a slight balance issue (see below), but you won't notice it unless you really look Here's some advice The metal glides in the drawers may seem bent when you see them on the side of the drawer, but they are not bent! You can save yourself some swearing by not using it. To maintain balance Although the piece is off balance when I first placed it against the wall, it no longer became an issue once I shoved it against the wall. As old as we are There is a problem with household floors, but I moved the piece around and found the problem is not with the floors. Despite the price, I was happy with this purchase, and it took weeks for me to locate after searching for weeks. It is perfect for a difficult spot in the kitchen and it is in a good condition. After years of putting up with crap and using it as an alternative, I no longer tolerate even minor flaws unless they're outweighed by the overall quality, the fit, and the price, which this one is. Fig. 1 Paint The images appear to be accurate and true to the description. It is not glossy, not distressed, not rough, nor is it brightly white, but it does not strike someone as ostentatious I'm more of a soft white, but I'm not off-white It should be white or cream in color. In a few of the joins, there are one or two minor globs. There is nothing major to report.
Quality of the overall product There are some weak wood joints on the shelves, but not enough to worry about for the (low) price. The top and bottom shelves are identical, and I positioned them according to how well the joins looked and what I planned to store This is easy. There are no chips or dents on the wood, and you would have to look extremely closely to see any small flaws. As you can see, I will be using it for a dog feeding station, and I will cut the water mat to fit on the bottom shelf (see picture). The shelves on top of the cupboard will be devoted to dog related items. Bottom shelf is the perfect height for the dogs' water bowl, and bottom shelf and top shelf are separated by a space big enough for the dogs to comfortably drink. Despite the fact that one of our dogs is half boxer and half pittie and hound and the other is mostly pittie and some hound, both girls didn't have a problem We have a boxer mix girl who is scared of anything new, but she drank immediately from the bowl on the bottom shelf. They are each about 50 pounds, and they have long legs. The piece fits perfectly in our kitchen space in every angle including fully extending the cabinet drawers on the right (see photo) and doing no harm to our large picture window on the left. It is exactly the same height as our countertops, so it works just as well as I had hoped.
I received my order quickly and all parts were included. The directions were clear as well. As soon as the addition was completed, it added the perfect amount of counter space to a small kitchen. In addition to providing additional cutting surfaces, the maple top can be used to place a microwave or toaster oven on the shelf. It was the assembly that caused the problem. It was difficult to use since the allen wrench was so thin, and it didn't fit the screw holes well, and some of the screws were laborious half turns to accommodate the logistics of their location. I spent two hours figuring it out because I had a terrible wrench, not because it was hard to understand. My 55-year-old eyes and hands had had just about enough and I was close to giving up when I found that parts of it could be put together with a screwdriver. With 80 dollars, it's a pretty good price now that it's done, but your time is a price to pay!.
Especially when it came to the non-descript materials The biodegradable form of My opinion is that there is too much of that. Messes up the place! Put the Styrofoam in the trash. ** See #2. It is OK to finish it, but I would expect that since it is made in the USA, it would be easy to put together. It was not possible to match the holes in the table top with the holes in the frame for the HEX driver screws. This hex driver is difficult to use and I had to adjust for the lack of alignment when trying to assemble the top with the frame. For those over the age of 50. In order to tighten the table top to the frame, you will have to use a hammer. It's impossible to work on my workbench because the door sliders are in the way. I just feel like I paid for the packaging, in my opinion. If you want me to clean it up, I should charge you. The #4.
A cheap soft metal screw holds the drawer together, but it is not a good one. In order to attach the screws, I had to use loctite. In no way did I overtighten these when I installed them. This is #5. The product took a long time to arrive at my home. It was shipped from Taiwan, wasn't it? It will not be the last time I buy from you. It is my opinion, so bear this in mind.