Goldlion Stainless Steel Inner Pot Compatible with Ninja Foodi 6.5 Quart Accessories Replacement Insert Liner
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It has a convex bottom like the Ninja pot, but I had to put water in it to determine that it is convex. There is definitely an increase in the water level in the middle and the water ran to the sides. It is my hope that this has helped.
In my experience, I have never had an issue with overpressurization with my Ninja Foodi Pressure Cooker. Every now and then, I take the time to clean out the pressure relief valve and the pressure When I clean it, I run it under hot water and I may add a little soap to break up any grease or grime that has collected. In the past two months, I have checked the pressure function about every two months. Empty an inner pot and add a cup of water to it. Check that the lid opening and other parts of the pressure seal have been thoroughly cleaned and are free of With the sautee function on the pressure cooker, I heat the water to boiling, shut it off, place the lid on, and let it cook. It happens often that the red valve will pop up immediately. To release the pressure, I simply push it down with the end of a silicone spoon. As I wait for the pressure to increase, I see if it builds quickly. In the event the pressure cooker timer begins, I will lightly press down on the red relief stem for a few seconds to relieve I have never experienced a halt in the pressure cooking function due to this issue. Once that has been done, I will release the pressure by turning the escape valve for a second. Once again, it comes down to pressure as the timer ticks. In conclusion, you should wrap a piece of tissue paper around a spoon's end to see if any pressure is escaping from the lid. As soon as this is done, I turn off the unit and let go of Additionally, I have several replacement pressure rings. This is a bit of a handy thing to have on hand. It would be terrible if it broke or failed, since we would have to throw away the food. It is a good idea to keep a spare part on hand.
I don't think so. Flat bottoms are not present in this model.
You cannot, according to my understanding. As with the internal pot, the pots are designed to fit in the foodi. There are six. A 5 qt post is shorter by 1 1/2 inches, so a 6 qt post looks shorter as well. Pots up to 5 qt would hang 1 1/2 inches above the bottom and would be triggered in error as well as would not heat as the lower edge would not be depressed down into bottom of the pot. Look at the site and you'll find an 8 QT liner.
Selected User Reviews For Goldlion Stainless Steel Inner Pot Compatible with Ninja Foodi 6.5 Quart Accessories Replacement Insert Liner
I love my Ninja Foodi and cook with it every day, as opposed to my Instant Pots only when I'm cooking a lot of food at a time. It will consist of a main dish cooked in the Ninja Foodi, and a side cooked My large Instant Pot now lives in a dedicated canning area, and I use it mostly for boiling vegetables or sterilizing jars. Regardless, my Ninja Foodi liner is scratched and cannot be thoroughly cleaned due to the fact that I have not used high quality silicone or plastic utensils with it. As I knew someone was going to offer a stainless steel liner at some point, I decided not to order another, so I've been using it with the fryer basket or pot holders It's too easy for me to worry about what might leak into my food if the lining is scratched. As soon as the 6 came out, I ordered a 6 immediately. Immediately, I ordered a 5-quart Goldlion liner (I have their dehydrator racks, so I know theirs are decent products), and it arrived the next day. In other words, this liner is a real improvement over the original Ninja Foodi liner, and not just in terms of its stainless steel construction. Three mounting holes are present on the base Bottom layer is a polypropylene layer for even heat distribution, but the base does curve up like a Foodi liner is supposed to, not be There has been no slowdown on my part- Even though I haven't cooked anything yet, I would dare say this new feature will result in the Foodi handling sauteed and slow-cooked foods in a much better way Dinners made from scratch. This Goldlion liner has bold, very clear stamped measurements in cups (2 to 18) and liters from the bottom all the way up to the max line, along with an additional indicator for the max under pressure, unlike the original liner which only faintly shows the measurements. Due to the fact that these markings are stamped into the steel, they will not be scrubbed off. It is very, very helpful that the numbers are readable from inside, not from the outside of the pot. In addition to the snap - Fortunately, I have an 8 quart Instant Pot cover that fits perfectly over the Ninja Foodi liner. As yet, I haven't had the opportunity to use this liner long enough to see how it holds up to regular use, but it appears to be at least as good, if not better, than the Instant Pot liners. There are hard-water spots on the bottom of my Instant Pot liners that don't wash off in the dishwasher, but Goldlion provided instructions on how to clean these spots if they occur with their Foodi liners. As a final plus, Goldlion offers a free gift as a way of saying thank you for acquiring As of the time this is being written, I'm not sure if they will still be offering this, but for every Goldlion product I have purchased, I have received a free gift of my choice. In addition to their large silicone sling, I chose the smaller one as my free gift (the one that fits my IP mini perfectly). As a result, I'm now able to use my Instant Pot underneath my cabinets since I bought that steam diverter along with the dehydrator rack. The Ninja Foodi liner is gorgeous, and I love this company, so I am very happy to see them back with it.
This is the best purchase I have made Then read on! Now I love it even more than I liked the Ninja Foodi. Foodi is my first instant pot since I used the Instant Pot, and I have one complaint I've had rust issues with the inner pot. The one thing I always had to watch was what I put into I am no longer a slave. As soon as I saw this item listed, I had to order it immediately. Yesterday, I used it for shredded chicken in a dish. I received it a few days ago, and unpacked it a few days ago. Chicken was frozen when it came to pressure, so it came to pressure exactly as it was supposed to. Here is a photo of my new pot you can see I used my hand mixer to shred the chicken into it. I am truly grateful for such a great product that you are offering!.
The box had good packing and it was very well packaged inside another box. I have the 8 qt. Foodi and am given a 00 gift card to use on another Foodi product. I have a Ninja Foodi Deluxe model, and this fits perfectly, I understand they have a 6 as well. This recipe makes five quarts. A second one is also available. I've used it a couple times over the past few days and it wipes well or can be put into a.
It has been almost 3 years since I obtained my Foodi. As for the non-members Using an inner pot that doesn't stick is really convenient Although it does have limitations, it can be used. In a factory pot, you stain it, it doesn't brown meat well, it limits what you can use, and it must be replaced after about a year, etc. This Goldlion stainless steel pot provided a solution to those problems. My favorite thing about Amazon is that it knows what I need even The pan is built like a tank. It can brown meat to perfection and cannot absorb stains or smells. As a standard procedure, I let it soak overnight because I'm too tired to do an intensive cleanup after dinner. It cleans up pretty easily the next This pot brings so much joy to my life. In addition to the stainless steel inner pot, I have purchased other Goldilion products (silicone sling, silicone seal rings, silicone lid stacker) and they all performed well.
There should be a Food Package with that! I like this pot a lot. The cutlery looked very polished when I took it out of the packaging - almost like a work of art. In a way, I almost wanted to display it instead of using it. I mean it! Foodi, however, works well with the pot. Besides the pressure lid sealing properly, it is easy to clean, etc. I have had my Foodi for not quite a year, and the original ceramic pot had chips around the top where the pressure lid is, as well as chips inside where other metal components are located. my pot is still under warranty, I would prefer to try this pot rather than buy a new ceramic one from Foodi that might begin to leave ceramic chips in my food. This was an excellent decision for me. It's also awesome that the seller is so nice. As a gift, they sent me a Foodi cookbook and another accessory. This is the pot I recommend Foodi send you to begin with -- that's what I wrote at the beginning of my review.
In fact, i released a video of it on YouTube under the channel Named.
In my possession are 6 of them. The 5 qt size has been in use almost every day for a few months now. There are a lot of ways to cook, from the most common air fry to saute It is a lot easier for me to use this inner pot since I don't have to worry about scratching the ceramic coating as I do with the original one. When I use my immersion blender or hand mixer with beaters in my foodi, this is an especially useful feature. The surface is easy to It goes through the dishwasher all the time (I don't usually wash pots and pans by hand). I'm not sure if it's due to the shiny/reflective surface of the stainless steel, but I think it actually cooks things a little faster than it would have before. The air fryer french fries I make from scratch may take one or two minutes less to prepare. Overall, I would say that this is a victory!.
Related Products For Goldlion Stainless Steel Inner Pot Compatible with Ninja Foodi 6.5 Quart Accessories Replacement Insert Liner
