simplehuman Over-Door Shower Caddy, Stainless Steel and Anodized Aluminum
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
An opening 3/4 inch in diameter is used for the clamp. I had to measure the circumference of my shower rod to determine its diameter because the rubber around it is hard. You will need to wrap a strip of paper or tape tightly around the rod, mark where the ends meet, and measure the strip or tape upright. Take the circumference and divide it by pi (you'll need a calculator to help). 1. 2. The circumference of the glass is 5 inches x It is the sum of pi to 142 and 0 (pi). There are 795 holes in the diameter (roughly a You should be able to fit it. before the screw can be tightened, the hook needs to be completely closed around the rod. My grown son was able to do the job despite my lack of strength. I find the fit to be very snug and secure. Here's hoping it can be of use to
It is true. My handheld shower is connected to a hose and used with this head.
Yes, they clamp, I have two installed in my shower and they are very useful. Since the larger style would need to have a tub/shower, you'd need to choose the larger style.
Thank you for stopping by. Approximately 28 to 29 inches is the size of my unit, John. According to the measurements I took, you can adjust the distance from 26 to 27 inches.
Selected User Reviews For simplehuman Over-Door Shower Caddy, Stainless Steel and Anodized Aluminum
Since it is quite expensive for a shower caddy, I expected a higher level of My second row began to rust very slowly after only a few months of usage, which I found incredibly surprising considering that it was relatively lightly used. The fact that I decided to spend a little extra money in order to remove rust from the component makes this even more disappointing. It is clear this was not one of the many good experiences I have had with simplehuman products.
It is well made except for the fact that it is made of stainless steel, which rusted after about six months
In my opinion, I do not recommend buying this product, IT RUINS!.
The price was out of my reach. I could not clean my shower with it or unclog my drain with it It serves as a dumping ground for all my stuff. When I realized I wasn't happy with the cheap Aldi one I had been using for years, I wanted a new one, but eighty dollars seemed too expensive Yes, a hundred times over. I no longer need to sit anything on the edge of my tub. No longer do you have to sit on the floor to use the tub. I was able to fit the bulky shampoos at Sam's Club. The newer models of razors are stored in it. The bottle holder holds normal bottles upside down so they can be dispensed without taking extra time. As long as the shower head is not dangling, it won't be an issue. Adjustments are made in a meaningful way. A bar of soap and a washcloth hang nicely from the holders. Everything you should expect from a shower organizer is included here. It always amazes me how nicely organized everything is in the bathroom/shower whenever I use it. My whole life, I've wondered where you have been.
The advertising is false. I noticed some slight rusting in certain areas when I used the product that is advertised as rust proof. The rusting is all over the place, I discovered later. When a product is touted as being rust proof and then rusts so fast, how can they offer this promise? It's high price, low quality, and their reputation isn't good. Also, their customer service is horrible, so look elsewhere.
In each shower I have one, and it's great for me because I have particular problems with standard shower caddies. Having a shower head that can be detached AND soap dishes that hang too close to the caddy puts too much strain on the caddy. There is no doubt in my mind that this is strong and effective for both of those problems. One shower has textured tiles, and the adhesive tabs that came with it work well with those tiles. It is not necessary to use those in the other shower As well as the suction, it is great! My life is so much better now that I have these. As a result of the many cheap solutions I have tried, my head is spinning. The money should be spent as follows You'll be glad you did!.
I consider the word 'adjustable' a myth. The caddy is designed to fit only a specific shower head connection diameter, which is not listed It will not fit any of my three shower heads since they are all of different sizes. Be sure to ask for the diameter specs before ordering, the manufacturer leaves this out of the description.
You won't regret spending the extra money.
It's been one year since the last Despite being a bit stiff, the product looked good, latched well to my wall, and latched well to my overhead fixture. I was disappointed when the first bottle fell to the ground as soon as I placed it on. As you can see in the included pictures, I had a problem. A tilting shelf prevents the shelves from being flat. A picture of the caddy vertically mounted is shown in figure 1. In pic 2, you can see how the shelf dips at about In pic 3 you can see how the bottles tilt, and in pic 4 you can see how the bottles Honestly, it is not hard to design a shelf that is roughly flat to the wall or even slightly tilted. From a purely pragmatic standpoint, I cannot give this more than a 1 point. Additionally, a strong magnet sticks to the metal, which indicates that it is not the best grade of stainless, therefore having the potential to rust or discolor over time.
I also found that the two shelves provided were too close together (vertically) to accommodate A look at Pic 5 will show you how the spacing looks with just a single shelf. Just notice how close the single shelf is to the shower head, so I I'm not sure what the advantage is of cramming another shelf into such a small space. Rather than spending the money purchasing a better grade of stainless steel, the manufacturer should be more concerned with improving their single shelf. Within six months, the suction pads stopped sticking and started getting moldy on the underside. Ultimately, the attachment to the shower head is the only support. b. In summary, if you don't have too many tall items, and if you don't mind the out-of-the-way placement, there is no downside to this design. This product may work fine, if you can live with the discoloration that might come from stainless steel not being of a good grade. *** Update one year from launch. It still looks good, does not rust, and is quite practical. I increased it from one star to two. For my application, this would be approaching a 5 star if the shelves were straighter and the suction pads missed the grout under standard tiles (which grows mold), and if they gave me some extra suction pads and I didn't have to take off and throw away the second shelf. This is a review I wrote on personal experience regarding a product I purchased. In addition to gifts, freebies, grants, or promotions, I have never accepted any other form of.