Better Living Products 76150-1 AVIVA 1-Chamber Wall Mount Soap and Sanitizer Dispenser, White/Chrome

My shower dispenser was long in the making, but I am happy with how it turned out. Despite being made of plastic, it really looks nicer than I expected and not only organizes the bottle mess, but it adds a touch of class to our shower as well. I should emphasize that anyone considering this or any other wall mount shower dispenser has to throw out any included tube of "Made in China" silicone and go out and buy an excellent tube of "Made in USA" GE silicone, and don't be cheap about Don't be afraid of using a little more than you think you need, and nothing unpleasant will occur. To avoid mold or mildew on the backside, I recommend that you put silicone along the top and side edges after mounting, to prevent moisture from entering. Because of other comments, you need to press the button for about 40 seconds, then place your finger over the tube and The result of this is a vacuum that facilitates the flow of the product. The steps were repeated about five times for me, and I was done.

Brynleigh Graham

| May 04, 2021

The old two chamber white model we bought about five years ago still works well. It has never been a problem for us. It's not something I think you should have an issue with. Just wipe the surface with some bathroom cleaner, let it dry, then use rubbing alcohol to really get it clean, and then you should be fine. specifies in the instructions to use all of the silicone adhesive, so we used all of that. It is possible they were not able to Additionally, make sure that the adhesive is placed over the tile rather than over the grout line. I believe this is yet another reason why it is more structurally sound. In that regard, we're very happy with this three chamber model. As I have to use a special shampoo, I can put it in the additional chamber.

Lainey SHARPE

| May 27, 2021

Since I live in a small town and there are no supermarkets around me that carry the brand of soap I use (have sensitive skin), I used to entertain the thought of using all natural body wash. The pharmacy offered glycerine-based soaps, but the cost of the products prevented them from being used except on the face or in a limited area. I purchased these dispensers based on their high rating and utilized them for one month - I am very pleased with them. Since I did abandon the idea of body washes after the first month, I can report that I did so for several A big hooray! I give it the following rating The installation process consists of the following This small acrylic shower stall has three sides made of glass in the shape of a bay window. You can follow the instructions to install the software if you follow them. You must make sure the surface is well cleaned and dried Following a thorough cleaning and drying process, I followed up with a good cleaning with alcohol (and another drying) just to be sure there weren't any mineral residues left to deal with. The double-space has to be used all the way After assembling this unit, attach the chambers with the foam tape and silicone adhesive, and allow it to cure for 24 hours before hanging it. Due to the fact that this is my only shower stall, on Friday morning I began the installation procedure. I then showedered, installed the unit, and slept in on Saturday before making use of the shower stall again before the hanging mount cured. The following is a list of areas for filling/pricing I found the chambers to be surprisingly large and hold a surprising amount of gel and shampoo (in my case) and the labels are customisable, as they come with multiple stick-on labels for each chamber. The following products are available - bodywash, shampoo, conditioner. Labels for all the boxes are present It is as simple as peeling and sticking. You must remove the top of the chamber and fill it after applying the label, hang it on the mount, and then prime the pump. It is imperative you follow the instructions as to priming so make sure you read them before writing a negative review about how the pumps don't work. You should also make sure to refill the chambers as required BEFORE they empty completely (like your fuel tank, think about it around 3/4 empty) or you will have to refill them again. In the event that they become dry again, prime them again. PROS -

With a chrome finish, metal accents, and a plastic housing but with a modern twist - these items are attractive while maintaining their functionality Mounts seem quite solid and the mount remains excellent as long as it has been It is true that the top lids of the containers have a small lip that will "snap" onto the containers, but they are not airtight or sealed. In their own right, the chambers are flat The bottom fell This is very convenient since the chambers can be sat on a counter without support, or they can be removed to clean the shower stall if the chambers need to be filled or cleaned. When using with a mesh pouf, a few squirts is all that is needed to create a generous amount of lather that will well last the entire cycle of washing The thick nature of the shampoo may have meant that the same amount was not delivered via the same number of pumps – It would have to be tested with other shampoo thicknesses and/or trying to dilute the shampoo a bit with water so that it is thinner. There are two hooks on the mount for hanging objects such as a pouf, brush, etc. The following cons are mentioned in the product information Make sure you hang it in a place that's out of the "movement" dimension of the unit because it has a "thick" footprint out from the wall The size of my shower stall is so small that frequently, I end up knocking one (or both) chambers off the mounting bracket while going about my shower routine. It seems to me (to me at least) that this is a design flaw, since the chambers just hang on a small hook on the mount and there is nothing to hold them in place when they get jostled (which is how I know they Drops from four and a half to five feet to the shower floor were repeated). the lids of the bottles don't lock in place, so they pop off and spill your product all over the floor of the shower, making it slick and dangerous (not to mention an expensive mess). * The accessory hooks on the mount are almost useless They don't even hold something on them. Located between the chambers (and each other), they are so close to the chambers and each other that it is difficult for anything to hang from The items hung from the second platform would have to either be (a) at different heights or (b) very thin, because their distance would cause anything hung from the second platform to reach the third. As a result, I stopped using the hooks and instead used other shower devices to hang my clothing. I - DE- The installation and removal of the system Uninstalling the mount may be done A renter or someone who lives in an apartment needs to be aware of this. You must uninstall the apparatus by removing the chambers and slowly prying the mount away from the wall with a metal putty knife held at a very low angle (almost horizontal to the shower wall). In order to remove the mount, gently lift the silicon adhesive from the wall using the putty knife. If trouble areas are present when doing so, use the forceps to separate them As for the adhesive foam tape (four spots), I coated it with "Goo Gone" and let it set for several minutes, then gently scraped away with a plastic putty knife so as not to damage the Once the wall was covered with everything you needed, you couldn't even tell that something was mounted on it. I hereby award you the final grade on the following


ASSESSMENT FINAL There are many excellent aspects to this product, but the nonlocking chamber tops, easily jarred chambers and useless hooks reduce the star rating. If the product were installed in a large shower area and other accessory hooks were available, it could easily achieve above perfect.

Reyna Becker

| Jul 26, 2020

The one we are using is for our daughter, who is 10 years old A three chamber set, which she says is very easy to use and refill, is very popular with her. Following that, two devices are installed and used It is our favorite part of our master shower, we have all three chamber sets. Due to the fact that we use both body and face liquid soap, we use two sets. Then we filled three dispensers with body soap in one set, and three other dispensers with shampoo, conditioner, and face soap in another set. It is easy to follow the installation instructions. With the provided glue, we installed the first set to a plastic inserted shower screen, and with the glue provided, we installed the other two sets on textured ceramic tiles. Everything works perfectly, and they are very secure. The following tips will help you with your installation * Use a small level on the dispenser holder that attaches to the wall, so it is at the right height. Additionally, we needed access to the shower for 10 hours after the dispensers had been installed, so after we installed them, we covered the dispensers with a small trash bag and taped the bag to the wall. During the drying process, the glue dried dry and kept everything protected from moisture. You can use these tips to get the most out of your book In the case of thicker shower products, such as conditioner, the dispenser may not function as it should. The only thing you need to do is fill the dispenser with conditioner, press the button a few times, and if the conditioner does not come out, press the button twice more, and then close one finger over the liquid exit, and follow the steps several times until the thick liquid drains The conditioner wouldn't come out of the machine until we repeated this four times. The only thing we needed to do was push button 2 again I pressed the button 3 times, then used one finger to shut off the liquid exit. I then released the finger, pressed the button several more times, then used one finger to shut off the liquid exit, and repeated the process until liquid emerged.

Avayah O’BRIEN

| Jan 19, 2021