Comet Original CAA-500 Mark II Standing Wave Analyzer 1.8-500MHz SWR & Impedance Simultaneously
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
There is one available. A little over $400.
Japan
A negative 13 is an ideal Center pin for this MFJ 1312d. This is also same plug, it comes with the Comet model as well, with an 85-volt direct current. This pinout has the same pinout number. An ideal rechargeable battery match. It is not a good idea to change the switch in the inside of the console.
Included in the unit are a DC power cable and a USB input cable. You can recharge NIMH batteries and charge an analyzer using this cable. There are 8 components required. 16 vdc.
Selected User Reviews For Comet Original CAA-500 Mark II Standing Wave Analyzer 1.8-500MHz SWR & Impedance Simultaneously
It was obvious that I was looking at the most cheaply available meters at $30 and $40 and the bad fortune I'd had with them was enough to make me consider changing. It turned out to be even better! Simple and intuitive is how to use the meter. Select 2M in the output range above which the meter can be connected along with 2M and above in the output range, and connect the antenna up the meter. the band by pointing your hand at one knob and the other at an indication as to how wide the spectrum is and what is the impedance. Clicking on a button displays on the small screen the slope of the band. This is very handy when it comes to theSWR of signals at more than one frequency with HF bands. Tuning dual tri- and dual. I used simple antenna systems for the VHF/UHF band in my Jeep. It doesn't include the USB port to turn off the off-load screen.
I have been saving all my friends' MFJ products since I began to shop at Sears for a long time. I never liked to buy an analizer from that brand either. The CAA- Comet came out as the best result I could find. Considering it cost me $5000, my excitement level was high when I read about it. What I like about it is that my friends have been able to test it in comparison to the MFJ products. My friends love the Comet product and appreciate its better-than-average value. The harbor freight company recommended my use of an aluminum case that can be stored and moved around well. The fact that it is able to perform so well and offers such quality is awesome to me. This product is recommended.
As far as construction is concerned, it stands tall. Using these as contrast in my display, both analog and digital needles were very pleasing. My ham radios are in perfect shape thanks to the ham radio presets. I recently purchased several new antennas for my existing radio and used this meter before connecting with any antenna. It makes it very convenient for us to sweep band samples by putting our indicator on the hamband. Then, after each band sweep button has been touched, a signal will appear on the display along the entire MHz frequency range. In addition, each reader in this device can graph and overlap up to five readings so you can examine how antenna changes are affecting receiver performance. If you need an extra protective case for such an important instrument, it would be ideal. The case runs on a six alkaline or rechargeable AA battery while built-in battery chargers come in handy. No matter the level of air conditioning you use, this option is available. An electric current can be used for the unit or recharged manually. Although this analyzer will compensate for coax cable attached to an antenna, as far as it can detect. As for short coax cables, they are less tricky than long coax cables, however it is not a great problem if you use a very short one for your measurement. A ham radio operator, I can say that this antenna analyzer is a valuable and affordable method of testing and tuning mast and antennas within an enclosure.
Antennas can be designed and built on this tool. provides valuable information about how to build and tune antenna sounds so that they're as effective as possible at selling them. If you're using it as an antenna component, it could provide valuable insight as to how they look during installation. Unfortunately, it lacks a great protective case to keep it safe.
Cone & mcs. in & The loop has a maximum speed of 50 MHz. As a result of this device, cleaning the antenna is very easy. The dis- A cone covers 50 inches in diameter. There was something about it that made you take notice, not unlike the Comet, which lasted for 500+ MHz. The report is recommended.
I am impressed with my product, which I examined an OCF wire used on all bands from 80 to 6 meters in length, and clearly found resonance along the edge as well as electrical and reactive components. downsides are the screw heads on the back of the box. I suggest that attitude reflects an attitude of indifferent response to customers' concerns.
The accuracy is very high. It'll set you back anywhere from $300 as well. The cost ranges from $1 to $800. Shop around the city. This is the ideal device if you are interested in building HF antenna systems or any other type of antenna.
A well built product with good affordability and plenty of feature set and a design you won't want to take. If you buy with this option, you will be happy.