Toner cartridge that can be used as an alternative to OEM cartridge
This package comes with 2 black high yield toner cartridges
Based on ISO 19752, an estimated yield of 2,600 pages is estimated for each cartridge
You can rely on our performance
Questions & Answers
Even after installing a new one, my printer still says it is out of toner. What should I do if the toner needs replacing?
Seven 360 and seven 7165 are in my possession. Our toner is low, so we ignore the In order to keep the toner mode continuous, we switch to continuous mode every time the toner is changed. A menu is available for your convenience. You're not alone The "General Setup" section describes how to do it You're not alone In order to replace the toner, you must You're not alone A continuous process. In any other case, the printer stops printing for a short time after the low toner message appears.
Is the Linkyo drum compatible with the original drum from the printer or do you need to buy Linkyo's drum in order to make the cartridge work?
As long as you're not getting an alert, don't replace the drum. I have a Brother 2270DW and have changed the cartridge twice or three times, but the original drum is still in good condition.
Do you have trouble with excess toner (hairy/stringy) at the top and bottom ?
It appears on the left side of the page for me.
What kind of print quality does it have ?
There is a difference between printing on stickers on any laser printer and printing on the sticker's surface. Since the surface of the Linkyo toner is similar to that of normal sheets of paper, it has been successful for me to print CD labels. It might feel like there are plastic particles embedded in the paper surface If you apply a substance like that to a surface, the toner may not adhere well to that surface (regardless of the type
Selected User Reviews For LINKYO Compatible Toner Cartridge Replacement for Brother TN450 TN-450 TN420 (Black, High Yield, 2-Pack)
The yield on the box is not as high as shown on the box
The last year has been using these to print with my Brother laser printer. There were no problems with previous orders last year, and page yield was very I purchased a toner set three weeks ago, and although it was advertised as 'high yield', the first cartridge ran out within three weeks, and I printed 350 single-sided pages with double spacing, without any graphics, Cartridges from last year are normally good for a thousand to two thousand prints I tried shaking my printer and resetting it, but still it refused to print after 1200 pages. My plan is to use the second cartridge in the set this time to see how long it lasts. *Update 14/4/2016 was the first time a second cartridge was used. The printer refused to print on 4/5/2016 with the message "Toner Low, Replace Now", so the cartridge ran out again in about 3 weeks like the first one. I was so happy to see it this time was 431 single sided pages (no graphics, all text, double spacing, and 3/4 page) rather than 350 pages before. I am unsure if I want to buy again in the short term. It costs about $45. 50 to buy original Brother toner. My local Staples store sells products for 99 right now and I would receive between 2000 and 2002 from it There are 2660 pages in this book. It would take at least three sets of this Linkyo 2 pack before it would give me the same yield, also making it much more expensive than the original.
| Oct 05, 2020
There may be a need to smack it! A set of toner cartridges for a Brother printer was purchased
Yesterday, I installed a new cartridge. In the beginning, the print was uneven and I thought I might have received a faulty product. I gently shook the cartridge as instructed a few times. I couldn't help but feel bad after that. Therefore, I would like to provide you with some advice about how to fix Ensure that the cartridge is removed and smacked several times with your palm across it, especially on the side that is causing you problems. After shaking it gently, put it back in the box. Eventually, I'll be able to print as well. It went against the instructions that came with the product, but it saved me a lot of frustration and fixed the problem for me. Make sure not to smack the part violently, but do so firmly and.
| Oct 15, 2020
I'm returning to the older, cheaper Brother brand after comparing the paper output and cost
The product has changed since I last used it. On the box, the product no longer matches the product on the shelf. It has been a while since I used this product and I am changing my high rating since the product has changed. I have a HL2280DW printer and I have used this toner repeatedly in the past. As I received my toner in the mail, it was marked as TN- The toner cartridge shape is different from what I have in my Brother laser printer and it does not fit. My order of toner had been sent to me in error, and I contacted Amazon about it. My order was replaced by Amazon shortly after it was returned to them for repair. It is also for the same incorrect toner cartridge in the second order. This toner does not appear to work properly on the machines described or it does not match the picture. As I am typing, I am searching for a new printer (Which is why I have left my previous review below (in the event that Linkyo started carrying it. )
After several Linkyo purchases, I am turning back to the Brother line. Here are my comments This is a good thing This is *1. I like that it is easy to install and works well with my Brother machine. 3.
It seems like a great deal at this price. There is also a Not So Good side of things This is *1. listed as "high yield," but that does not equate to Brother's "high yield" toners. You cannot expect this cartridge to last much longer than a similar one. It is not uncommon for me to get 1 on 1 help. I can print 5 to 10 reams of paper from one cartridge depending on whether I am printing one or two copies at a time It is two-sided. Up until I noticed that I was buying toner more often than usual, I did not pay much attention to this. From the moment I began to pay attention to this, I realized that this less expensive toner was not really the 3.
2) In the last box I purchased, there was a defective cartridge. There was no toner left after I printed less than 100 pages (literally). This had never happened to me before, but I finally reached my breaking point with Linkyo because of it.
| Jun 11, 2021
There is a black line on the right edge of the printed pages caused by the defective product
Every piece of paper printed with a toner cartridge shows a thin black band beginning at the top and ending at the bottom. The ink powder is visible on the very edge of the drum when I inspect it. Q-tips are what I use to clean it In addition to that, every page after the first one shows a black line on the right edge that appears on every next page due to this defective cartridge. A fix is not possible. Before shipping out these things, do they even test them?.
| Oct 08, 2020
There is definitely a cheaper price tag, but the quality is also lower
This was unfortunately not a good choice for my purposes. Greetings, I am a seller on Amazon and Ebay and print out tons of shipping labels every week. I have always used Brother brand toner, which is indeed expensive, but has always worked well and lasted for several Seeing how well this cheaper substitute is reviewed, I decided to give it a try. I am not happy with the outcome I have had no problems printing simple unimportant pages for a month, but after I added the shipping labels there were some gaps next to the scanning bar and in other places. There is no way I can allow that to happen! It wasn't until I realized that my drum might need replacing that I noticed the gaps in my printing last time. The printer is a few years old so perhaps that is why. Then I bought a new drum ( which are expensive) and it still caused the same problem. In that case, I replaced the cheaper toner with Brother brand toner and the problem was solved immediately. In other words, I might be able to get away with this if I didn't need the shipping labels to be perfect, but that is clearly poor quality and not something that can work for me.
| Nov 05, 2020
These are good value, work without issues, and I bought them for use with my Brother HL-L390
One of the printers we use at a local free clinic is the 2270DW. Compared with OEM supplies, they fit and perform like new at a fraction of the price. It was an easy process. The next time I order, I will reorder.
| Nov 05, 2020
This is not at all a high yielding investment
A genuine Brother TN 450 would last one year, but these OEM cartridges have not lasted over six months in a fairly slow year. This has been going on for two Due to my limited knowledge of page counts, I am unable to make an accurate comparison. However, based on my purchase history, I am reasonably certain that these are no more than 30% as efficient as the Brother brand. Print quality was OK, but considering the extra waste of two cartridges versus one it works out to be a wash. In that case, I'll go back to.
| Dec 28, 2020