Anker USB 3.0 to Ethernet Adapter, USB 3.0 to Gigabit Ethernet Adapter, Aluminum Portable USB-A Adapter, Compatible with MacBook Pro 2015, MacBook Air 2017, and More
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
When it comes to speed, the single most important question to ask is "where is the bottleneck?" If you're concerned about speed between your computer and the internet, for example, the slowest part of a home user's connection will almost certainly be what the ISP (whether cable, DSL, satellite, or whatever) provides; In the United States, typical download speeds range from 4 to 20 Mbps. , but the majority of the time it is much worse. br>Ethernet is available in three different speeds: 10 megabits per second (mbps), 100 megabits per second (mbps), and 1000 megabits per second (mbps) ("gigabit ethernet"). 5 Gbps is the fastest USB 3 speed. The USB 2 interface has a maximum speed of 480 megabits per second. br>Thunderbolt 1 has a theoretical speed of 10 Gbps. Thunderbolt 2 can transfer data at a rate of 20 gigabits per second. br>(It's a little more complicated because of channeling and the possibility that the ports are shared by other devices, but the above numbers aren't likely to be off by much.) )br>So, if you're working with a 10 Mbps or 100 Mbps ethernet network, or if the speed of your internet is the only thing that matters to you - It makes no difference which adapter you use: Even a USB2 port with an ethernet/USB2 adapter has at least 4X the capacity of your network (or internet connection). br>However, if you have a gigabit-capable internet connection, If you have an ethernet LAN and want to work at speeds up to 1 Gbps, you can use either USB 3 or any version of Thunderbolt, though neither will give you a speed faster than your LAN's limit of 1 Gbps, even though Thunderbolt is (at least) 2X the speed of USB 3. br>However, if you're using a USB3/ethernet adapter, keep in mind that the above advice only applies if both the adapter and the USB port on your computer are USB 3. If either is a USB 2, you'll only be able to transfer 480 megabits per second.
The RTL8153 device, according to the Realtek website, supports up to 9k Jumbo frames. It makes no difference whether your operating system supports Jumbo frames or not.
No, but that's beside the point. USB 3. The 5Gbps speed of 1 gen 1 is impressive. You wouldn't even come close to using the maximum bandwidth of either USB 3.0 port because this is a 1Gbps NIC. There have been one generation.
Selected User Reviews For Anker USB 3.0 to Ethernet Adapter, USB 3.0 to Gigabit Ethernet Adapter, Aluminum Portable USB-A Adapter, Compatible with MacBook Pro 2015, MacBook Air 2017, and More
Anker's Ethernet to USB adapters are what I'm using right now. My wife and I both have MacBook Pro laptops (mid-2015 models with macOS Sierra), and these adapters are completely plug-and-play. and-play. I didn't have to make any changes! I simply connected the USB side to my USB hub (as shown in the photo) and the Ethernet side to my RJ-45 Ethernet port. 45 ft. of cable, and you've got yourself a high-speed internet connection. access to other networked devices on my home network, as well as high-speed Internet over my network It was the simplest installation I'd ever seen. Anker products are something I really like: They are dependable, reasonably priced, and well-made. Anker, you did a fantastic job!.
I have the Apple Thunderbolt Gigabit Adapter, but I'm using both Thunderbolt ports on my Macbook Pro for displays, so I needed a wired networking solution, which led me to this unit. I have it connected to a monitor's built-in hub, but it would obviously work just as well if it were connected directly to the Mac. br>br>There was no need for a driver, setup was simple, and I had no issues with it. Indeed, it performs so admirably that I purchased one for use at work, where I had previously relied on an Apple-branded device. USB 2 with a logo 0 unit, which was causing me issues (e. g. , telling me my network cable was unplugged). br>br>At work, I use it all day and haven't had any problems with it. I've moved a lot of data around on both networks, which are gigabit. This is a fantastic little piece of equipment. br>br>Word to the wise: El Capitan (as of this writing) has some USB issues, so if you're having problems with this device, try resetting your System Management Controller. br>br>UPDATE: br>br> On my mid-range computer, I'm still using it every day, transferring files at full gigabit speeds with few issues. Macbook Pro, model year 2014. At the time of my original review, I was using El Capitan, but it is also a good option. Without the need to install any drivers, Sierra is supported. Realtek provides a driver for this device. tw, which uses less CPU than the built-in Mac driver, which I am currently using under Sierra. br>br>In the year or so that I've had it, I've had a couple of occasions where the speed slowed to a crawl (10 Mb), but simply removing the device from the USB port and reinserting it restored full gigabit speed. That's pretty good for a year of continuous use. Since switching to the Realtek driver with Sierra, I haven't had any problems at all.
For my MacBook Air 2012, I have the Apple version. I needed another one for my other house, so I went with the Anker version. The status LEDs on the Anker are my favorite feature. Power is indicated by red, network is indicated by green, and data transfer is indicated by blue flashing. Because of the data transfer LED, I discovered that when both WiFi and Ethernet were connected, WiFi took precedence over Ethernet. I changed the Ethernet priority in my Mac's network settings. This Ethernet to USB adapter is extremely nice!.
0 port. 0 gigabit Ethernet adapter capable of delivering a gigabit of bandwidth - I'd read reviews of a few others who could only do 500-1000 words per minute. 600Mbps. When I saw that Anker had one that was supposed to be good, I figured it was worth a shot because I've always had good luck with the company. br>br>Well, it more than lived up to my expectations. I just got a reading of 910Mbps on my INTERNET connection (not my LAN). With Xfinity, 1Gbps is about the theoretical maximum, and it's about what I get with my wired desktop computer. Furthermore, Windows 10 recognized it right away, and it was up and running in a matter of seconds. I haven't tried it with my Mac yet, but there's no reason to doubt the stated compatibility. br>br>Plus, it's designed to look like a miniature unibody aluminum tank. The design is a little too flashy for a USB Ethernet adapter (the LEDs, in particular), but for $20 and flawless performance so far, I can't complain.
Not all USB and aftermarket adapters are compatible with the Mac. This unit far outperformed the previous one I had used. There are no drivers or kexts to install; just plug and play. There are only two USB ports on my computer. Because I have a USB 3. 0 port on my MacBookPro, I use this adapter. Amazon Basics has a 0 hub. It really works. br>UPDATE OF 11/05/2018br>Following the installation of a few security updates on Windows 10, Due to Apple's modification and updating of LAN and networking support in version 06 (Sierra), the adapter stopped working. To enable Anker device support, go to the manufacturer's website for the chip set used in the device, which in my case was Realtek chip set 8153. If you have this problem, go to realtek. com and download the MAC OS kext/driver for chip set 8153. It's a straightforward installer, but you'll need to restart your computer once it's finished. As soon as the Mac is restarted, the device will begin to function. Enjoy it!.
This adapter worked well at first, and the indicator lights were helpful in determining whether the adapter was connected to the internet. br>br>About 30 plug-ins later, in, plug- The adapter has failed to establish a reliable USB connection after only a year of use. To keep the connection, I need to have something pushing the adapter into the USB socket at all times, and if the adapter is jiggled or moved in any way, the connection is lost until I can find the perfect angle to keep the adapter plugged in. br>br>Was great while it lasted, quick and simple to use, but if you need something that can withstand being plugged in and out on a regular basis, look for something else.
And Anker was my first choice; I used the Ethernet adapter in conjunction with an Anker USB 7 port hub to achieve excellent wired speeds (94. 91 megabits per second down, 12 megabits per second up Up to 15 megabits per second It was also incredibly simple to put together. It was simply plugged into a USB 3. 0 port that was available. I connected my Ethernet cable to the 0 port and was ready to go. You've come to the right place if you're looking for a USB to Ethernet converter. If you have any questions, please ask them and I will do my best to answer them or obtain the information you require.