Thermal Grizzly Minus Pad 8 Thermal Pad, 100 × 100 × 1.0 mm

If it does not come with the card, the product is a fake one. The package even notes it has a Certificate of Origin on it. This is the only way to verify it's the real thing.

Jamie McFarland

| Nov 20, 2020

It is perfect for an upgrade for PS4 Pros with the Thermal Grizzly Pads. Sony put a poor quality cooling system into the PS4 Pro consoles and it made the unit less quiet than the PS4 Pro 7100 model. It is not as efficient when it comes to cooling, so I went with the 7100 model instead. In addition to replacing the poor quality thermal pads on the memory ram, I also replaced the pads on the vram (which some people forget to do). As a result of its poor quality, the old thermal paste has already dried up. My go-to thermal paste is the Artic MX4 due to its long-lasting properties The cooling performance on my desktop computers has been great for a long time. As of April 2018, I could tell that the PS4 Pro 7100 was more quiet than when I first purchased this model back in April 2018, and the cooling is much better. Testing high-demand games such as God of War, Horizon, and Red Dead 2 on the Pro was a challenge. Even after opening the top lid to check that the fan was on, I had to open it again to make sure it was running. *Recommend these great thermal pads with a strong recommendation.

Rosalyn Irwin

| Feb 10, 2021

As expected, the Thermal Grizzly Pads worked with the other two sizes I bought. I do not agree with the second point. One of the 0mm ones is horrible. Taking the plastic off requires it to stick to my fingers and fall apart, so I can only hope that the item was For this reason, Onyx PC needs to check its stock and delete.

Kehlani Mills

| Oct 09, 2020

I was able to install my EVGA RTX 2080 Super with no problems. They are awesome - they're like thermal grizzly pads A high performer. Due to their larger size, they are more expensive, so I bought this one 120x20x1mm to apply to high heat areas, In the image, I've paired the grizzlys with a less expensive 1mm alternative. The 1mm alternative has a lot more surface area to work with for the less sensitive areas and the backplate (the blue material). I was pleasantly surprised at how well the combo worked. As a result, it was very easy to apply, very secure, and very sticky (you could cut precise rectangular areas with it). Orient the components so that the FLAT side is down on the PCB components and the ROUGH side is up so that the baseplate will be able to be removed easily in the future without tearing off the pads, since they will have a better grip on After all was said and done, the temperature of my card dropped by 20 degrees! I did this at rest and during full-intensity training You are loading. In case anyone was concerned about the different sizes of pads on this card, worry A thickness of 1mm works great in You will need to carefully cut and apply to the correct areas and components, then you will be all.

Macie Clarke

| Oct 22, 2020

My PS4 pro (launch model) has always been noisy to me - ever since the day it was released. During the last day of warranty, I tore the case apart to try and replace the thermal paste, in an attempt to drop down the temps and therefore quiet the fan noise. I completely forgot the thermal pads, which is why things went very quiet. I was tired of the sound of the jet engine when playing demanding games, so I looked for other ways to cool the system My next step was to replace the thermal pads with something more effective after checking their thickness. As I observe it closer this time, it is incredible that it made any progress in cooling. It turns out that the factory pads on the VRM's are perhaps half the size that they should be, and they are even not There was still a problem with alignment on the RAM pads, though they seemed to be a bit larger. In fact, the hardware purchased here is enough to complete the PS4 Pro on both the VRMs and the memory, and I have only scraps left over. I cut all pads to fit and made sure they were centered when assembling. It's as if I woke up one day and went to bed the next day. I'm amazed at how much cooler she is now after I used both this and my MX4 thermal paste. Although it continues to ramp up a lot under load, it is still a significant improvement over the takeoff pattern of the Boeing 747! You are buying quite a lot of material for such a small price. I love how well it works, and I'm super happy with the outcome!.

Presley Dunn

| Nov 05, 2020

The reason I bought it was because of that I received a different product in the pictures than I saw on the website. It appeared that the picture showed a thermal pad nearly the size of the bag, but since it is a single inch by inch, it must be a mistake. A casual reading of the description indicates that the Length and Width measurements have no The thickness of the pad is all that matters. Judging by the pictures of this product, I expected two to be enough, but the two I received were unimaginably small.

Madison Becker

| Nov 08, 2020

Under the heat sink, it felt like putting a thick slice of cheese, and the results were expected - the CPU temperatures went up significantly. I think any thermal pad would likely yield similar results and would not be a good idea for CPU applications, this being true not just of this product. After trying a number of things, I found that I was able to solve the problem by using a thin layer of thermal compound. Y'all need to stop trying to reinvent the wheel on the bottom line- Put a thin layer of good ol' trusted thermal compound on your heating system and save yourself lots of money and headaches!.

Mylah Fletcher

| Nov 21, 2020

This set consists of one mm pads and one mm screws In many cases, the Grizzly thermal paste is the only thing that prevents a console from being replaced.

Dean Maloney

| Jan 20, 2021