Thermal Grizzly Kryonaut The High Performance Thermal Paste for Cooling All Processors, Graphics Cards and Heat Sinks in Computers and Consoles (37 Gram / 10 ml)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The MSI RGB driver is compatible with this. However, I can't see the heatsink because it blocks my view.
I apologize for the late response, but the information is still relevant. I would guess that there are more than ten good There is no point in giving anything a damn if you don't care about it. The best way I've found to keep the paste from sticking is to use very sparingly, spreading it until a paper thin layer covers the surface. You don't need to worry about the layer being perfectly flat or even because the heatsink will fix those issues.
In this product, the electrical conductivity does not exist
Selected User Reviews For Thermal Grizzly Kryonaut The High Performance Thermal Paste for Cooling All Processors, Graphics Cards and Heat Sinks in Computers and Consoles (37 Gram / 10 ml)
Be aware that this thermal grizzly Kryonaut may be fake or part of a bad batch. I did a perfect application and got worse temps on the CPU and on the GPU than the stock ones. This was done over a period of three days with multiple cycles. I thought maybe some heat cycles would help it set so that was done multiple times on each day. However, the temperature was still at an unacceptable level. I removed the processor and GPU to find pitting on both parts of the CPU and GPU and on the cooler, the past appeared to have grit in it, which caused me to wonder if it was In any case, this caused my system to be scarred for life. ***
I searched this situation and others have had the exact same experience I have.
The item I got was The kryonaut is really thin as compared to how thick and viscous it normally is. I did not see any indications of fraud until I started noticing the telltale signs The tale of the Instead of a foldout manual of 3 pages, a 1 page version exists. It is frosted- Tube has bright red lettering with orange-colored spreader, and a clear spatula for spreading Putting red text in a red font. My last straw was a significant temperature increase after applying the new paste. My readings have increased by 2 degrees Centigrade. I had to use 3c paste instead of old stock paste on my Lenovo Y50. As an IT professional, I know how to properly apply thermal paste on a wide variety of computers and computers. It is important to be mindful when purchasing Kryonaut. There are a lot of imitations of this stuff out there. There is no way to tell who is selling the real stuff anymore.
In need of serious cleaning (with lots of effort). It took me about an hour to clean and detail the Compared to the non-FTW+ edition (EVGA Geforce GTX 970)I took it apart and cleaned it with 91% rubbing alcohol using an air duster, a new paint brush (adding extra The back and mid plates, heatsink, mainboard, fans, and other components were all completed, as well as cleaning off the old thermal compound and applying some of the thermal grizzly kryonaut The following temperatures are necessary for pre-cleaning There was an ambient room temperature of 22 degrees Celsius
50 degrees Celsius at idle
91 degrees Celsius at load (100% fan)
The GPU was getting so hot that I was underclocking itself by almost 200mhz. After detailing and cleaning the car, apply the thermal Grizzly Kryonaut. The computer runs cooler than when it was brand new out of the box, right off the assembly line. recall correctly, it ran around 70-80 I would say that this stuff is a bit thicker and harder to spread than things like Artic Silver. Even so, it took me only a few minutes to apply. I am very satisfied with the results! As follows *br* Editor's note As others have mentioned in the comments, much of the temperature drop was likely caused by the cleaning, which is understandable. It is unfortunate that I did not do a controlled experiment like that to determine whether it works. Although, I would say the stock thermal paste on this thing was dry and toast. Mind you, I cannot say with certainty to what degree each of these factors affected the end result.
I am confused by the fact that many people, including Tom's Hardware, Gamer's Nexus, LTT, and Der8auer, use this paste and get good results, but I get worse than stock. My apology is for the delay in responding to your email I have pasted my Overpowered 15+ laptop and you can see before it was re-built in the pictures The paste I got was around 80-90 At maximum temperatures, the temperature reaches 83°C. As soon as the re-evaluation is completed I received an 85 for the paste There is a maximum temperature of 87°. My results continue to be the same after re-applying the paste several times. In addition, I used this paste on my desktop (did not take screenshots) with a deledded 8700k and a H115i extreme and the following results were obtained This page contains key information about Arctic The 64th number The maximum temperature for a Kryonaut is 65° C The number 66. It reaches a maximum of 67°. My experience with using this paste on both my laptop and desktop, and the number of times I've applied it, leads me to believe that I am using it correctly (since AS5 performs better on both computers). In other words, I think the Kryonaut I got is fake or from.
Until today, I have only used Arctic Silver because it was the only brand I knew. I always thought Arctic Silver was the best paste to use since it was popular, affordable, and seemed to always outperform the glue that came with the cooling device. Then, after watching dozens of video reviews and reading posts with benchmarks, I decided to try a brand that had good reviews but was a bit more expensive. So I think Thermal Grizzly Kryonaut is more effective than what the majority is saying as it has more positive reviews. It seems that my CPU and memory temperatures are higher than I expected Depending on your GPU type, water cooling can take a few degrees off, and when you are pushing the boundaries of your tech, it is always worth it if I can shave off 2 or 3 If you spend a little more on premium products then you can cut the temperature by 3 degrees C here and there. There are likely three people who will be able to use this item It has been used for 4 applications, I've used it for two so far and I'm sure I can squeeze another pea-sized bead there, maybe In this case, I did not use the plastic applicator as I do not use it to spread paste. In each foil and airtight bag, there is a piece of thermo paste, plastic applicator, and instructions. You can think of it as a tiny drink pouch. The stars are 5 out of 5. It is working as expected Yes, I would recommend it to a friend and would purchase The pros are I found that the stock paste performed better than the experiment paste. A previous application of Arctic Silver was made. There is no logo sticker included (wish it had one) Although it is a few dollars more expensive than Arctic Silver, which is a very popular.
Related Products For Thermal Grizzly Kryonaut The High Performance Thermal Paste for Cooling All Processors, Graphics Cards and Heat Sinks in Computers and Consoles (37 Gram / 10 ml)
