Shuttle XPC Cube SH370R6V2 Mini Barebone PC Intel H370 Supports 95W Coffee Lake CPU No RAM No HDD/SSD No CPU No OS 300W PSU

My PCs are some of the best builds in the world, but for work the workstation had to be reasonably fast, without any upgrades. It's been years since I built a Shuttle XPC (older models), but I decided that the Shuttle XPC Cube SH310R4V2 would be a good fit for my needs. As for my computer build, I had an Intel i7-3820K The 8700K, also known as There are two Samsung 970 EVO NVMe drives and two Corsair Vengeance LPX PC4-16GB drives This is C16 (21300). It is necessary to remove the heatpipe plate in order for the CPU to be installed, which requires unscrewing the back plate. A heatsink, fan, and shield are installed. Initially, some thermal grease was included, but for better results (I used something better), you are free to use whatever you want. There is an easy way to access the NVMe, but the case makes it difficult for clumsy players to screw the M in. We are down to two. It is important to note that no M is present. It is recommended that you bring your own heatsink and/or fan if you want for the 2 cooling. I liked how easy it was to reach the DIMMs To write this, I used a low-key approach It may be a good idea to profile DIMMs, since some of the DIMMs with HUGE RGB charges seem a little too much The bottom of the drive cage may not be covered by infused heatsinks.
It took me less than 5 minutes to put together the entire system. You have to expect to lose a couple of minutes if you want to add an optical drive or an external SATA hard drive You may choose from five or two. The fifth). There are a couple observations to be made Thermal solution should be capable of handling 95 W of TDP for Shuttle, so that should be no problem. When I loaded all cores simultaneously under full load, I had no problems (overheating, throttling, etc. ). Unless you are using additional power supplies, the included PSU is only 300 watts. You will have to think about what you will do with graphics before you can make that decision for my build. this is a workstation, I don't care if it has a GPU. For those who want to add an external graphics card, there is a 500W power supply that you can get for this machine. It is, however, fairly expensive, so you may be better off purchasing one of the higher end XPC chassis with a 500W PSU first. In addition, you're limited to a shorter GPU in this chassis, but it's still possible to get decent GPUs in a half-rack The cards must be of the same length). For those who want to build something similar to mine, here is a good barebones starting point The SBC. Definitely worth taking a look at.

Erick Sparks

| Jul 24, 2021

You should not purchase bls2kit8g3d1609ds1s00 with the Shuttle XPC Cube SH81R4 ( This is the current "shopping pair" that is recommended by Amazon and it will If you go into the BIOS, you may be able to find the Crucial ram with the part number above. It even tests fine with memtest, so you might want to try that out. Seeing it was one of the weirdest things I have ever experienced. The video and BIOS corruptions occurred as I navigated through the BIOS menus to configure the system. I thought the problem had something to do with video corruption, but I think it has to do with how the system is handling In addition, the system would freeze when I tried to install Windows 8 because it tried to start installation but I couldn't get to the install button before the system rebooted. I tried the above mentioned memory in two different brand new SH81R4 systems and had the same issue in both of them. It was Shuttle's site that I went to and I purchased the memory that was on the compatibility list 2 of Crucial 8GB Single DDR3 1600 MT/s PC3-based A 12800 CL11 UDIMM that can accommodate up to 240GB The problem has been resolved by the use of desktop memory CT102464BA160B (and it is now functioning properly.

Sofia REES

| Aug 19, 2020

I have built five Shuttle barebones since I began playing computer games 20 years ago. They are such precious little things to me. am a graphic arts professional, so the fact that these are so light and portable is very appealing to me. It happens that I have to go to my job at times, and my laptop just won't do. An i9 9900K running on this baby will be able to handle anything you can The only time I have broken one is when I replaced a CPU or a chipset because like to stay up to date. There's something appealing about this one because it You can free up the drive bay or install something else and you can get a faster startup time. The XPC exterior hasn't changed much over the years but the motherboard is still the same. This one booted in 30 minutes after I built and compiled it. It was exactly what I had hoped for.

Kamden REES

| Mar 03, 2021

It was a good product, up to the standard I've come to expect from Shuttle bare-bones There are bones systems in the human body. The first I owned was in the mid-80s, and the last in the present This decade. There is a good cooling system, but it could be because the new CPUs, although faster, emit less heat. I have found that this model is better for my needs than their newer model that does not have an optical drive. I had a previous unit that had a CPU that was rated at 135W TDP and kept it running constantly at full load all day long because it caused the cooling system a bit of trouble. With a TDP of up to 95W and the excellent Intel i7-3220K processor, this style is sure to impress It is a letdown that they have switched to Intel-based parts. What's more, it's only a 65W part. It has a new type of pin that secures the heat pipe to the CPU rather than their previous screws, and I hate those Also, it is good to note that there is only one internal USB3 header. That is dedicated to feeding the front panel, so if there is an internal device that needs USB3, you are probably out of luck (a splitter may be possible, but I wouldn't trust it). If you have ever assembled a computer, you should be able to build one of these in under an hour (you just need to watch out for the pins and make sure they are properly snapped down). I have Kingston HyperX Fury Black 16GB memory, a ZOTAC GeForce GTX 950 OC, and an Intel i7-4730K processor for my Shuttle The LG WH16NS40 16X Blu-ray player is powered by the Intel Core i7 6700K CPU I was able to get MicroSoft to reinstall my Blue-ray optical drive as well as a Samsung SSD and a 3TB hard drive from the previous unit I was able to configure the system without any problems. switched over the old unit to Mint Linux and it is running well now.

Wyatt French

| Aug 16, 2020