Rode RodeLink FM Digital Wireless Filmmaker System
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
In other words, yes.
There is no 3, despite the R600's name. The microphone jack on a computer is 5mm. The camera I used for the shoot was the Vixia R500 with a 3 megapixel sensor. The mic jack is at 5 volts. An adapter or any other device is not needed
The receiver should be connected to a mixer or video camera and then used as a headphone. suggest that you shouldn't connect the receiver directly to your digital SLR (except a video camera), it can damage the outlet, plus there is the possibility of missing or skipping audio. That's a risk you don't want to take. Sync audio in post, using the receiver to a mixer (the Zoom product is portable and perfect for a DSLR) and headphone over it. There is software to automatically sync audio, so you won't even need to touch the receiver. I hope this will be helpful.
It is not possible to use wireless in such a Those need to be on their own channel and with separate receivers. We are available at 800-553-5645 if you need assistance Three Hundred Thirteen
Selected User Reviews For Rode RodeLink FM Digital Wireless Filmmaker System
I have two sets of these units. Rode engineers it in such a way because if it was caused by this, then why did they do it that way. The device is an audio player, so why would it damage the audio as soon as the batteries run.
I did some research and found that the support isn't that good either. It gets so expensive after this that you have to ask yourself, does it really I think that's all right. In my opinion, there is nothing wrong with the product so much as the support. The instructions on one big sheet are tedious, I guess it is because they try to put 16 different languages on one page. In a way, that's the case. A quickstart guide is the only documentation that's available on Rode's website. However, this is a great product, so let me share what I've learned so far 1 of 3. A hand-held remote control can be used to change channels manually Connect both units and turn them on. the battery door on the RX and press the red sync button. On the front of the unit, press the channel button to choose the The battery door on TX should be opened and the sync button should be pressed. If you selected a channel on the RX, it should change to that channel. In my memory, you need to do this relatively quickly since the RX times out. Here's how you can do it manually if it finds a clear channel automatically. No need to do this if it finds a clear channel automatically. The channels are difficult to scan since you can't scan through them 1. Finally, 2. The Rode support team specifically told me that NiMH batteries would work just fine in these devices. It should be okay to use any AA battery. The NiMH batteries have lower voltage, so I was wondering how this could be related. 1.
2.
3. There is a lav mic by Rode that has a detachable cord and plugs which can be swapped around. There's no such thing as this. On each end of the cable, you will find both the microphone and connector. Don't be careless, for goodness sake! 4
Digital noise is intermittent, but it's not excessive, less than 1 decibel An increase of 50 dB is necessary. But if you crank up the gain on a quiet spot, you may find it. The best editing software will have a feature that allows you to remove it without it having any effect on To a degree, I think that when you go wireless, you sign up for this as well. Audio quality is only possible if you have a good wired microphone and cable.
It disappointed me, even though I bought it with high hopes 1) By the fact that this mic creates an obnoxious buzzing sound, regardless of the mic or camera settings, and regardless of the environment I are using 2) The device periodically turns itself off while you are using it. has caused me a lot of problems, since I have to reshoot several scenes for a video I'm working on. It makes sense that RODE products are fairly well regarded for whatever reason, maybe they are a great choice overall, minus the occasional lemon that gets through. It was a total waste of $400, so it was returned.
The best solution for recording video interviews on a semi-professional level A professional camcorder and DSLR are available. it is about four times as expensive as the cheapest solution, but it is also about four times as good in terms of sound quality, as well as far more convenient to use than more expensive pro solutions. A dead-end street An easy hookup that doesn't require any thought. This wireless device (after you figure out how to put the batteries in) works automatic there are no pairing problems or channel selection issues. Vs. other wireless solutions below this price point, this wireless device has a *digital* transmission, which results in a lower noise floor. The speed of digital transmission is faster and there is less hum, hiss, dropouts, and unwanted noise. When compared to the Rode kit, I found the Movo kit to have a very high level of hiss and hum. A youtube head-up on the Rode kit convinced me to jump to that one after not trying the Azden kit Analyze the differences between the heads. I love the sensational sound of the lavalier (lapel) mic You can pick up a pleasant chest tone with rich bass, as well as pleasant highs Sibilance can no longer be heard from the The spring season is included It comes with "dead mouse" wind socks, a loaded pin mount, and a foam cover. Although there are no instructions provided on how to attach the pin or covers to the mic cord, you can figure out how to do it if you look at the picture of the "finished" look. There is a high-end market for the ultra-rich This little microphone has a translucent cord to connect with the mic, but it's light and thin, which makes it easy to thread through clothing and reduces cable rubbing noises. I love the screw-lock mechanism! I'm using a 1/8" mini-drive A plug connector is used to connect cables If you screw them in, you will prevent problems from talent or camera operators pulling out the plugs, which might cause the audio to be cut off. I'm a fan of the status display on the receiver - it's great A battery indicator shows the level of both units at the same time, and indicates when a talent unit is muted or at rest. While heavier than cheaper units, it is still easy enough Weight per unit of 41 lbs). A Sony 4K handycam and its recessed multi-angle lens is required for this application With the interface shoe, I needed more room for my fingers to fit underneath the receiver, so I used a cold shoe adapter.
As a whole, the system works as it should under ideal conditions. Nevertheless, there is a horrendous sound of wire shielding interference when the microphone cord gets close to the unit When you use a microphone cable, you have to stretch it completely out while using the output audio, otherwise it is useless. The TX and RX are good, but the microphones are a letdown. As long as the wire can be fully stretched out, the audio is excellent. But as soon as I put the wire through my shirt and move around, the sound just becomes interference from the shield. It isn't just a shirt rubbing against the wire it actually produces noise. This exact problem is described at around 10 p. m. The following are the first 45 seconds of another review video The EIDT The YouTube link will not appear on Amazon. YouTube video titled "RodeLink Wireless Filmmakers Kit Review" was posted by DSLR Video Shooter in April 2014. I have made an edit to type A replacement microphone was sent to me by Rode after I contacted them about the issue.