KiiPix Portable Portable Printer & Photo Scanner Compatible with FUJIFILM Instax Mini Film, Pink
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
There is no sensor in the camera, you just have to buy the film, like you would with a camera like a polaroid
Hi there and thank you for your inquiry Sadly, I do not have access to this with the purchase of the
You may want to turn up the brightness all the way on your device. You may not be able to capture a clear image due to the dark screen.
It's possible that your phone dimensions are too small if the black border wraps around the entire screen. You can find out which sizes of phone and screen work with this in the user manual.
Selected User Reviews For KiiPix Portable Portable Printer & Photo Scanner Compatible with FUJIFILM Instax Mini Film, Pink
Therefore, I belonged to the club that figured out how this printer worked. There may be some instances in which the window shutter fails to open when you push its button. In the event you are getting black photos, this is 100 percent The shutter is very hard to detect unless you listen really carefully. I would first set up the printer as if you were printing a photo, but remove your phone from the top. Before putting any film in the printer, do what I suggested above. Rather, you can use the flashlight on your phone to point at the shutter and press the shutter button a few times, looking for the shutter to actually open (I promise you can see it!). I also notice that the shutter has a completely different sound when it opens compared to when it is shut. BELIEVE IN A SOUND SO FAMILIAR TO YOU.
So, next time you want to print a picture, don't roll it out until you hear the shutter sound (so keep pushing the shutter button until you do). There is a change in the device, but I am not sure if it was intended by the manufacturer. Is it possible that the ones you have to do this are defective? If so, that would be unfortunate. Is it possible that you send me a new picture of Kii? The reason for this is because it's As I have been watching videos of other people using this printer, and when they hit their shutter buttons, it makes a VERY HIGH SOUND more than mine does when I hit mine. I think my printer may be defective because I have been watching videos of other people using it. Thanks for your kind words ).
When KiiPix released, I was thinking of buying one. I wanted to try KiiPix, despite a few negative reviews. My friend owns an HP Sprocket, but it was too expensive. It turns out the quality is not better, KiiPix prints are the best, see attached some photos side by side. As a rule, I buy the film in bulk to increase my savings and also find it works with the Polaroid 300 cameras. The best pictures can be obtained with a little practice. There are a handful of photos that came out dark, but I was able to adjust the settings and they turned out great. I am definitely going to use this when I teach fifth grade Taking pictures in my classroom is a lot of fun for my students, and I am sure they will enjoy taking pictures. As for the HP Sproket and Fuji Instax camera specifically, I would definitely recommend this one over them. If your smartphone is all you need, then you don't even need a camera!.
I really think the technology is cool, but it is just a very flawed product. Although I have turned the brightness on my phone to its brightest setting, the printed photos are very inconsistent in terms of brightness and colors. I cannot understand why my photos have a black border around the top as well as sometimes on the edges, even when I align them to have no border visible. About half way through was black goo coming out the starter, and it really got My next course of action will likely be to replace it with a new one and returning it if it still does.
Not a single photo to show for the 13 wasted photos, the 3 packs of ten film, or the 3 10 packages of film. In order to print the film, I inserted it onto a sheet of paper, then aligned the yellow mark with the printer's window on the back. The knob could be turned easily and the black film cover was ejected easily. The problem is that when I attempt to eject a photo, it would become jammed and not come out of the device. I tried everything I could think of to fix it, but nothing worked. The film would not eject no matter how many times the knob was turned. Whenever it became stuck, it would not move. My check to make sure I was turning the knob in the correct direction is aided by an arrow on the knob, so I knew what direction I needed to turn it in. Removing the jammed image from the back panel and opening the back panel in a dark room did not help. As well as the next photo, it would get jammed. Since I have no clue whether this printer will produce decent results, I can't recommend it. There's no point in spending this kind of money on this.
Last weekend, I bought a printer to take with me to a wedding. We found the printer to be very easy to carry around and you could print pictures anywhere and anytime. Having a physical photo to keep was a great way to get a retro vibe from the pictures. My recommendation would be to check it out. Voici a tip Prior to printing, make sure your phone is set to full brightness to prevent the print from coming.
This printer was sent to me by my mom, so I can use it while I'm away at college (Go Vols! ). It took me some time to figure out what it was, but once I got it set up and used it I called her to tell her it was a pretty cool This was a big help to me, since I took so many pictures on my phone, but did not always have time to send them in for developing, this solved that problem have a photo board in my apartment where I have put them, and since I can print out any picture I want at once, I like that I can add new photos anytime My only concern is yet to run out of film to print my crazy photos off! This camera is lightweight and compact. Those are good to decorate dorm rooms and apartments. You might even send a few to your mom to display in her office.
If you have college-aged kids, these are good times to decorate their rooms. My favorite part about this printer is its little size!.
My excitement about receiving it was too much for me to deal with, and as soon as I got it, I followed all directions exactly, however, the film I received turned out to be faulty. It was supposed to give me 10 pieces of film, but none were developed.
I really liked how easy it was to use this printer. I was initially intimidated by the numerous steps in the manual, but I was able to set up everything instinctively and the machine was ready to print photos within liked that I didn't have to find an outlet to plug it in, and I did not need to adjust settings via my phone like I have to do these days with the majority of IoT devices. There was something retro cute about these photos. To find the right balance of light, you need to practice The brightness of the display and the lighting in the room. I agree, we should light up the rooms as well! As a result of printing one photo near my window blinds, the picture had It appears that something affected the print due to the light coming through the cracks on my window blinds. * However, there is something fun about it because that is what the game is all about. Instead of industrialized prints of photos, you can use lighting to create the perfect retro look for your picture. A camera toy like this could also be a good educational toy for kids to get them started thinking about the mechanism of cameras and photo taking. I think that for something under $40, this is a good deal. Ideal as a gift or for use at home.