14 Pack Color Correction Light Gel Filter Sheet Colored Overlays Transparency Film Plastic Sheets, 11.7 by 8.3 Inches, 7 Colors
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It is true. In one sheet I cut out the space for my Malibu lights and in the next I cut out the space for
With a flash light or a modeling light they are fine, but not with LED. It depends on your setup and the light source. It wouldn't be wise to put them too close to " Hot Lights " for too long.
Selected User Reviews For 14 Pack Color Correction Light Gel Filter Sheet Colored Overlays Transparency Film Plastic Sheets, 11.7 by 8.3 Inches, 7 Colors
Immediately upon turning them on, they melted right off the lights and nearly caught fire. I searched for 'heat resistant', which they are not.
The year 1989). A total of 2 sheets of each color were provided to me. Despite the thinness, it was a good thickness. The lampshade was covered in a protective plastic, which was great since I could draw over them with a sharpie and cut out the shape I needed for my lamps, followed by removing the plastic (and any If I doubled up the yellow and green, they looked richer, but if I left them alone, they looked a little green. I like how the red and blue colors look without having to double them Using two filters gives me the opportunity to create a color template that is larger than one, so I like that the filtering isn't too aggressive.
The lights in my house melted them. I have an Elation light bar with 4 lights.
Sheets have a nice shade of color. Despite this, for my application with LEDS at 2500K, 360 Lumens, I put a purple filter three layers thick and it seems A note on side safety I had set them 1/4" from the LED, which I thought would be fine, but after four hours I checked on them, and found the heat from the LEDs, despite the fact that the lamp was outdoor and the temperature at 35 degrees, had already caused burn marks on them.
Was quick from start to finish.
Those are good colors, but the lights will probably need a double sheet of paper to produce a saturated tone. There are a few issues with this gel, however, such as the color being a bit pale vs. the thickness of the gel, and the protection film along both sides are meant to prevent any scratches when inset on.
It has been used to soften up light and added to down lights as a diffuser to add atmosphere and provide a softer highlight in the interior. This product is simple to cut and can be used to create custom colors by using multiple sheets.
A warm light will cause it to melt. Make sure you use them with a continuous light if you are lighting your subject for photography. It's really hard to tell in the picture that they started to melt when I had them about 4 inches away from the light. Only when there is not a continuous warm light for the flash to work. In general, I would say that this is ok. Ensure that the plastic clear film on both sides is removed.
A little more than 30 minutes into the game, it was still perfect. As it melted, it froze. The small LED porch light it was covering was enclosed in it. As a way to create an atmosphere for our backyard movie night, I used the film. The movie started about 30 minutes in when we were all smelling something peculiar. In the process of checking, I discovered that it was the movie. There were dark burn marks on it because it was melted. I would say that heat resistance definitely isn't an issue. A 30-minute light was too small for me and I had trouble keeping it lit.